OMRON Zeitschalter/Kalender-Zeitschalter（Repräsentativer Standard：CE）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Empfehlung
Solid State Timer H3Y
OMRON
[Features]
· Ultra-small timer for use in sequence control incorporating a dedicated IC.
· High precision with a repeat error of ±1% (including first time value).
· Recover time including recovery during operation is less than 100ms.
· Easy time setting using the large dial in common with the +- driver.
· Semi-multi power source voltages.
· A standard product which acquired UL, CSA standards.
· EN61812-1 Compatible, corresponds to the CE mark.- Mengenrabatt
ab∗ ： 45.05 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Zeitrelais, Ausschaltverzögert H3DT-H
OMRON
Value Design for Panel supported product that increases control panel value.
Power OFF-delay timers allow you to set two time ranges with each timer, from 0.1 to 12 seconds for the S Series and from 1.0 to 120 seconds for the L Series.
■ Features
· Introducing the advanced H3DT timer, based on a new concept.
It has been 80 years since the production of OMRON's first product, an X-ray timer.
Provides more value to the customer, taking control panels to a new level.
· The top class in industry*1 for low power consumption
Power consumption is low, which reduces the DC power supply load for the entire control panel.
· Push-in Plus terminal blocks for easy wiring.
Just insert wires, no tools required.
Use Push-In Plus terminal blocks to reduce the time and work involved in wiring.
· Certified for safety standards of major countries.
The Timers help to reduce the work involved in control panel design
with certifications and compliance for various standards, including UL Listing.
*1. According to OMRON investigation in November 2015ab∗ ： 124.32 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Solid State Timer H3CR-A
OMRON
[Features]
· Multiple time ranges and operational modes.
· DIN48 × 48 mm full multiple timer.
· Two types of AC / DC free power supply, drastically reducing the number of models in stock.
· Can deal with a variety of applications with eight operational modes (11 pin type) or five operational modes (8 pin type).
· An economical design with reduced power consumption.
· 0 Setting instantaneous output which facilitates sequence check.
· Socket (type P3G-08) attached, 75 mm neck-down short barrel type (Type H3CR-A8EAC100 to 240V/DC100 to 125V).
· PNP input types are also available in the lineup.
· UL, CSA, NK, LR, CCC acquired, EN61812-1 compatible, corresponds to the CE mark.- Mengenrabatt
ab∗ ： 54.54 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Solid State Timer H3YN
OMRON
[Features]
· Type H3Y and implements multiple time ranges and multiple operational modes in the same shape.
· Moreover, compatible with the EN standard.
· Implements multiple time ranges and operational modes.
· Semi-multi power source voltages.
· Type MY power relay and pin compatible.
· A small scale UL contributing to space saving. CSA standard acquired.
· EN61812-1 compatible, corresponds to the CE mark.
· Can deal with multiple time ranges with switch-over between four ranges.
· Can deal with four roles of multi-operational modes in one apparatus.
· Type MY relay and terminal compatible.
· Compatible with the EN standard, so OK for export to Europe.
· Deals with reducing inventory volumes by semi-multi power voltage compatibility.ab∗ ： 59.31 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Digitaler Timer H5CZ
OMRON
Unbeatable ease-of-use combined with economy.
[Features].
· Changing each digit up/down is a simple operation with a see-saw key.
· Simplified "digitization" of an analog timer.
· Timer, twin timer implement in one apparatus.
· Power source circuit and input circuit are isolated from each other in the timer.
· An upper limit of the setting value can be set, preventing mis-operation by the output apparatus due to erroneous setting.
· Contributes to estimation of lifetime of the timer and load with the output time counter..
· A line-up with an instantaneous connection point type.
· Water resistant/dust resistant structure (UL 508 Type 4X: IP66).
· Implements a key protect function.- Mengenrabatt
ab∗ ： 133.54 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Summenzähler / Betriebsstundenzähler (DIN 48 × 24) H7GP
OMRON
[Features]
· Easy to view IP66 oil-resistant level water resistance, and oil resistance DIN48 × 24 size total counter / time counter.
· By employing a negative type alphanumeric height of 8.5 mm LCD and red colored LED with back-light, a similar high visibility to LED implements low power consumption.
· By using an integrated front part and casing and oil resistant parts materials, IP66 oil resistant NEMA4.
· Implements a short barrel shape with a neck-down length of 80 mm.
· Flip switches NPN and PNP to deal with each input mode.
· Can be both externally reset and manually reset.
· With a finger safe terminal block cover for protection against electric shocks, which conforms to VDE0106Part100.
· Safety standard UL, CSA acquired.
· EMC (EN61326) compatible, corresponds to the CE mark.- Mengenrabatt
ab∗ ： 198.96 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Solid State Timer, H3DK-G
OMRON
Solid state timer H3DK-G
[Features]
· DIN22.5 mm width standard timer series for use in the control panel.
· AC/DC free power source compatible (AC/DC24 to 240V).
· DC12V powered type has been added every series.
· UL, CSA, CCC acquired, EN61812-1 compatible. Compatible with the CE mark.
· Conforms with the EMC standard EN61812-1, so can be used in an industrial environment but also in residential, sales and light industry.
· A terminal construction with secure screw fittings that prevents against hazardous contact (EN50274 compliant).ab∗ ： 126.22 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Ausführung |
| Anzeigemethode |
| Befestigungsmethode |
| Zeitangaben(s) |
| Versorgungsspannung |
| Ausgabemethode |
| Repräsentativer Standard |
| Höhe(mm) |
| Breite(mm) |
| Tiefe(mm) |
|
|
|
|
|
|
| |
| Warenzeichen | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON |
| Artikelserie | |||||||
| ab∗ | 45.05 € *Stückpreis Standardkonfiguration Mengenrabatt | 124.32 € *Stückpreis Standardkonfiguration | 54.54 € *Stückpreis Standardkonfiguration Mengenrabatt | 59.31 € *Stückpreis Standardkonfiguration | 133.54 € *Stückpreis Standardkonfiguration Mengenrabatt | 198.96 € *Stückpreis Standardkonfiguration | 126.22 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage |
| Ausführung | Timer | Timer | Timer | Timer | Timer | Sonstige | Sonstige |
| Anzeigemethode | Analog | Sonstige | Analog | Analog | Flüssigkristall | Flüssigkristall | Analog |
| Befestigungsmethode | - | Sonstige | - | - | - | - | Sonstige |
| Zeitangaben(s) | 0,1 s - 1,0 s ～ 5,0 s - 120 s | 0,1 bis 1,2/1 bis 12 ～ 1 bis 12/10 bis 120 | 0,1 s - 600 h ～ 0,05 s - 300 h | 0,1 min - 10 h ～ 0,1 s - 10 m | 0,001 s - 9999 h | 0.1 - 99.999,9 h / 1 s - 99 h 59 min 59 s (über DIP-Schalter umgeschaltet) | 1 s - 120 s |
| Versorgungsspannung | Wechselstrom-dediziert / Speziell für DC | AC/DC / Wechselstrom-dediziert | AC/DC | Wechselstrom-dediziert / Speziell für DC | AC/DC / Wechselstrom-dediziert | Wechselstrom-dediziert / Speziell für DC | AC/DC |
| Ausgabemethode | Relais | Relais | Relais / Transistor | Relais | Relais | - | Relais |
| Repräsentativer Standard | CE | CE | CE | CE | CE | CE | CE |
| Höhe(mm) | 28 | 100 | 48 | 28 | 48 | 24 | 89.4 |
| Breite(mm) | 21.5 | 17,5 | 48 | 21.5 | 48 | 48 | 22.5 |
| Tiefe(mm) | 56.6 | 90 | 68 | 52.6 | 83.9 | 80 | 100 |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Ausführung
- Timer
- Sonstige
-
Anzeigemethode
- LED
- Flüssigkristall
- Analog
- Sonstige
-
Befestigungsmethode
- Blende
- Steckbuchse
- Sonstige
-
Zeitangaben(s)
- 0,1 s - 1,0 s
- 0,1 bis 1,2/1 bis 12
- 0,1 m - 3 m
- 0,001 s - 9,999 s
- 0,1 min - 10 h
- 0,1 s - 10 Min.
- 0,1 s - 10 h
- 0,1 s - 10 m
- 0,1 s - 12 s
- 0,01 s - 99,99 s
- 0,1 s - 600 h
- 0,1 s - 999,9 s
- 0,1 s - 1200 h
- 0,1 s - 9990 h
- 0,001 s - 9999 h
- 0,01 s - 9999 h
- 0,01 s - 9999,99 h
- 0,2 m - 5 m
- 0,2 - 5,0 s
- 0,04 s - 0,5 s
- 0,4 - 120 s
- 0,5 s - 10 s
- 0,5m - 10m
- 0,05 - 12 min.
- 0,05 - 12 s
- 0,05 s - 300 h
- 0.1 h - 3 h
- 0.1 - 99.999,9 h / 1 s - 99 h 59 min 59 s (über DIP-Schalter umgeschaltet)
- 1,0 s - 30 s
- 1,0m - 30m
- 1 s - 10 Min.
- 1 bis 12/10 bis 120
- 1 Min. - 23 h 59 Min. × 7 Tage
- 1 Min. - 99 h 59 Min.
- 1 s - 99 min 59 s
- 1 s - 120 s
- 2,0 m - 60 m
- 2,0 s - 60 s
- 5,0 s - 120 s
- 6 s - 60 min.
- 24 h x 7 Tage (1-Min. Einheiten)
-
Versorgungsspannung
- AC/DC
- Wechselstrom-dediziert
- Speziell für DC
-
Ausgabemethode
- Relais
- Transistor
- Sonstige
-
Repräsentativer Standard
-
Höhe(mm)
-
Breite(mm)
-
Tiefe(mm)
Suchergebnisse durch Herstellerauswahl einschränken
-
- OMRON (7)
- WAGO (0)
- EATON (0)
- SIEMENS (0)
- SCHNEIDER ELECTRIC (0)
- FINDER (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Zeitschalter/Kalender-Zeitschalter
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.