OMRON Steckverbinder für Platinen（Repräsentativer Standard：UL）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Empfehlung
DIN-Steckverbinder (für mittleren und starken Stromfluss) – XC4
OMRON
[Features]
・ This is a DIN connector for medium and high electrical currents, for which standards have been set internationally.
・ It conforms to and is compatible with DIN41612.
・ As there is sufficient insulation distance, it can be used with medium and high electrical currents, and high voltage circuits.
・ It can be mounted within the same rack as the XC5 series.
・ There is a wide selection of the M type of DIN connectors (mixed type) available.
▪ UL standard (File No.E103202) certified products are used as standard (except for some products).- Mengenrabatt
ab∗ ： 14.18 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder für Flachbandkabel (Ausführung PCB) , XG2
OMRON
[Features]
· Total cost reduction is achieved by high-density mounting and low-power wire connections.
· The pressure-welded system lets you connect all terminals in bulk without any terminal processing work.
· Can be dip-soldered directly to a PCB.
· The small size (height 5.8 mm, width 6.8 mm) greatly improves PCB mounting efficiency.
· Uses a 2.54 mm grid terminal array.
· PCB pattern design is easy.
· Two types of terminal arrays: standard and inverse.
· Uses insulating materials complying with UL standards (UL94V-0).
· Pressure-welding tool uses attachment that supports all poles.
· Saves time and work connecting wires.- Mengenrabatt
ab∗ ： 2.40 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Steckverbinder (Zwillingskontakte) – XC5 (DIN-Norm)
OMRON
[Features]
・ The number of international standard DIN connectors has been expanded substantially.
・ The aim is to expand the number of contacts while leveraging the best points of DIN connectors.
・These variations can be used with a number of industrial applications.
・ This fits global needs by moving from one-piece connectors (card edged) to two-piece connectors.
・ A low price has been realized while also being able to maintain high reliability through the use of a twin contact type.
・ Low insertion force has been realized thanks to FEM analysis.
・ Can fit with the manufacturer's XC series.
▪ UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.- Mengenrabatt
ab∗ ： 3.08 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
IC-Buchse – XR2
OMRON
[Features]
・ Highly reliable such as being able to cope with sudden power outages etc.
・Ideal for high speed data processing circuits.
· The contacts are round 4-point pin contacts which have good retention and superior vibration and shock resistance.
・ The opening for inserting the contact is large, so insertion is easy.
・ The position of the contact with the IC (integrated circuit) lead is high, ensuring an excellent contact.
· Has excellent resistance to rises in flux.
・ A rich product lineup, including open frame, closed frame, single-row type, DIP terminal, wrapping (wrap) terminal, and low-profile DIP terminal types.
・ Gold flash-plated products are also now available as a series, allowing you to choose the perfect product for the application..
▪ UL standard (File No.E103202).
・ Certified products are used as standard.- Mengenrabatt
ab∗ ： 0.95 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Originalstecker – XG8
OMRON
[Features]
・ This is a general purpose original plug that conforms to a broad range of applications.
・ It can be widely used as a plug for a variety of socket fitting.
・ Examples of conforming socket connectors (manufacturer: …, Connector for XG4M flat cable/XG5 loose wire insulation displacement connector.
· Compatible with through hole diameter ⌀0.8.
・ For the 2-column type of L-shape terminal plug, through the utilization of a block type of base, workability is improved during soldering, a lock lever that has been simplified further is used and simple locking is possible (except for XG8V, XG8W Straight).
・ Separation cut is possible (except XG8WL type).
▪ UL standard (File No.E103202).
・ Certified products are used as standard (only XG8A and XG8B).- Mengenrabatt
ab∗ ： 1.24 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder mit halbem Rastermaß (für Platine-zu-Platine-Verbindungen) – XH3
OMRON
[Features]
・ A space saving type that saves space in the screw mounting section.
・ Handles stacking heights of 12 mm to 20 mm.
・ A half pitch connector that handles heights between circuit boards of 12 mm to 20 mm at a pitch of 1 mm with stacking connections.
・ High-density mounting is possible thanks to the 2-row configuration with a contact pitch of 1.27 mm.
・ Connections with the circuit board use four row staggered configurations (1.27 mm × 1.905 mm), and stop pins are used as standard for all contains to help prevent floating and falling during soldering.
・ Uses a leaf connection structure that is able to hold up to prying and that enables smooth insertion and extraction.
・ Has a mating length of 3.1 mm, helping improve space during mounting.
・ The design of the press fit section helps maintain a stable contact force.
・ What's more, by utilizing gold and palladium-plated contact points, the reliability of the contacts has been improved even further.
▪ UL standard certified product (File No.E103202).
・Cannot be mated with XH2/XH4 half pitch connectors.- Mengenrabatt
ab∗ ： 4.00 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kurzschluss-Steckverbinder – XJ8 / XG8S / XG8T
OMRON
[Features]
· A low-profile, economical connector that is used for circuit switching.
· Provides an above circuit board height of 5.8 mm (XJ8 type) or 6.8 mm (XG8S/T), and a low profile.
· These connectors can also be used both vertically and horizontally in 2.54-mm grid high-density mountings.
· Available in a lineup of one to three rows.
· Compatible with through hole diameters of ⌀0.8.
· An easy-to-insert, difficult-to-remove structure.
· A 2-point contact structure with high contact reliability.
· The thin plug housing (XJ8 type) is made using PPS resin, which has excellent heat-resistant characteristics.
· UL Standard (File NO E103202).
· Certified products are used as standard (XJ8 type).- Mengenrabatt
ab∗ ： 0.26 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Steckerform |
| A· B· C |
| D· E· F |
| G·H·I |
| M·N·O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Anzahl |
| paßender Sift / Kontakt |
| Anzahl der Adern |
| Anwendung |
| Zulässiger Strom(A) |
| Zulässige Spannung(V) |
| Verdrahtungsverfahren |
| Anschlussrichtung |
| Schutzfunktion (umweltbeständig) |
| Repräsentativer Standard |
|
|
|
|
|
|
| |
| Warenzeichen | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON |
| Artikelserie | DIN-Steckverbinder (für mittleren und starken Stromfluss) – XC4 | Steckverbinder mit halbem Rastermaß (für Platine-zu-Platine-Verbindungen) – XH3 | |||||
| ab∗ | 14.18 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.40 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.08 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.00 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.26 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | 5 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage |
| Steckerform | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch |
| A· B· C | - | - | - | - | - | - | - |
| D· E· F | DIN/Mini-DIN | - | DIN/Mini-DIN | - | - | - | - |
| G·H·I | - | - | - | - | - | - | - |
| M·N·O | - | - | - | - | - | - | - |
| P· Q· R | - | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - | - |
| V· W· X | - | - | - | - | - | XH | - |
| Anzahl | - | - | - | - | - | - | - |
| paßender Sift / Kontakt | Stecker (Stecker) / Buchse (Buchse) | - | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) |
| Anzahl der Adern | 15 ～ 48 | 10 ～ 60 | 20 ～ 100 | 8 ～ 64 | 2 ～ 100 | 1 ～ 120 | 2 ～ 24 |
| Anwendung | Für Leiterplatten / Sonstige | Für Leiterplatten | Platine-zu-Platine | Für Leiterplatten | Für Leiterplatten | Platine-zu-Platine | Für Leiterplatten |
| Zulässiger Strom(A) | 6 ～ 15 | 1 | 2 | 1 | 3 | 0.5 | 2 |
| Zulässige Spannung(V) | AC 380 ～ AC500 | 250 VAC | AC 300 | AC 300 | AC 300 | AC125 | AC 300 |
| Verdrahtungsverfahren | Lötmittel | Pressschweißen | Lötmittel | Lötmittel | - | Lötmittel | Lötmittel |
| Anschlussrichtung | Gerade / Winkel | Gerade | Gerade / Winkel | Gerade | Gerade / Winkel | Gerade / Winkel | Gerade |
| Schutzfunktion (umweltbeständig) | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Repräsentativer Standard | UL | UL | UL | UL | UL | UL | UL |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Steckerform
- Rund
- Quadratisch
-
A· B· C
- Sonstige
-
D· E· F
- DIN/Mini-DIN
- Sonstige
-
G·H·I
- Sonstige
-
M·N·O
- Sonstige
-
P· Q· R
- Sonstige
-
S· T· U
- USB
-
V· W· X
-
Anzahl
- Sonstige
-
paßender Sift / Kontakt
- Stecker (Stecker)
- Buchse (Buchse)
- Sonstige
-
Anzahl der Adern
-
Anwendung
-
Zulässiger Strom(A)
-
Zulässige Spannung(V)
-
Verdrahtungsverfahren
- Lötmittel
- Crimp
- Pressschweißen
- Befestigung mit Schrauben
- Sonstige
-
Anschlussrichtung
- Gerade
- Winkel
-
Schutzfunktion (umweltbeständig)
-
Repräsentativer Standard
Suchergebnisse durch Herstellerauswahl einschränken
-
- OMRON (7)
- MOLEX (5)
- HIROSE ELECTRONIC (4)
- WEIDMÜLLER (4)
- FUJIKURA (DDK) (0)
- HONDA TSUSHIN KOGYO (0)
- HARTING (0)
- ERNI (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Steckverbinder für Platinen
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.