SANKO MFG Rechteckfräser (HSS)（work material：Edelstahl）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
KHB2TS hybrid-kurzes, 2-schneidiges, Messer
SANKO MFG
A 2-flute end mill for finish machining. Abrasion resistance is excellent and high efficiency machining is possible.
[Features]
· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).
· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.
· Furthermore, machining speed is equivalent to carbide, providing "high efficiency and safety".
· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.ab∗ ： 154.38 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
P-VS2T-P beschichtet, 2-schneidig, kurzes Messer
SANKO MFG
[Features]
· P coating provides excellent surface flatness and abrasion resistance.
· A 2-flute end mill for finish machining.ab∗ ： 79.44 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
SS2T S-beschichtet Estech, 2-schneidig, kurz
SANKO MFG
2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.ab∗ ： 75.02 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SS2TM S-beschichtet Estech, 2-schneidig, gleichmäßig
SANKO MFG
[Features]
· 2-flute finishing endmill with TiCN coating.
· Can be used widely for milling of grooves, sides, holes, etc.
· Enables a wide range of machining applications, due to the regular flute length.
· High grade powder metallurgy HSS with S-coating.
· Enables a wide range of machining applications, due to the regular flute length.ab∗ ： 53.75 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
STEC2TL ESTECH 2-schneidig, lange Messer
SANKO MFG
[Features]
· A 2-flute end mill for finish machining.
· Can be used widely for milling of grooves, sides, holes, etc.
· Uses high grade powder metallurgy HSS.
· Enables a wide range of side machining and deep engraving, due to the long flute length.ab∗ ： 86.15 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
P-VS3T P-beschichtetes 3-schneidiges kurzes Messer
SANKO MFG
[Features]
· A 3-flute end mill for finish machining.
· P coating provides excellent surface flatness and abrasion resistanceab∗ ： 43.71 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
P-VS4T P-beschichtetes, 4-schneidiges, kurzes Messer
SANKO MFG
[Features]
· A 4-flute end mill for finish machining.
· P coating provides excellent surface flatness and abrasion resistance.ab∗ ： 80.03 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SS4TL S beschichtet Estech, 4-schneidig, lang
SANKO MFG
[Features]
· 4-flute finishing endmill with TiCN coating.
· Enables a wide range of side machining and deep engraving, due to the long flute length.
· High grade powder metallurgy HSS with S-coating.ab∗ ： 84.20 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| work material |
| Blade shape type |
| Number of flutes(sheet) |
| Tool Material Type |
| Machining Application |
| Shank diameter (d)(mm) |
| Coating |
| Overall Length (L)(mm) |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Underneck length (ℓ1)(mm) |
| shank |
|
|
|
|
|
|
|
| |
| Warenzeichen | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG |
| Artikelserie | ||||||||
| ab∗ | 154.38 € *Stückpreis Standardkonfiguration | 79.44 € *Stückpreis Standardkonfiguration | 75.02 € *Stückpreis Standardkonfiguration | 53.75 € *Stückpreis Standardkonfiguration | 86.15 € *Stückpreis Standardkonfiguration | 43.71 € *Stückpreis Standardkonfiguration | 80.03 € *Stückpreis Standardkonfiguration | 84.20 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 8 Arbeitstage | 8 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 8 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage |
| Blade diameter (D)(φ) | 20 | 10.5 ～ 26 | 7.4 ～ 20 | 3 ～ 5 | 12 ～ 20 | 8 ～ 18 | 13 ～ 16.5 | 6 ～ 7 |
| Blade length (ℓ)(mm) | 45 | 22 ～ 50 | 15 ～ 45 | 10 ～ 15 | 55 ～ 100 | 20 ～ 40 | 35 ～ 40 | 35 ～ 40 |
| work material | Edelstahl[○] | Edelstahl[◎] | Edelstahl[◎] | Edelstahl[◎] | Edelstahl[○] | Edelstahl[◎] | Edelstahl[◎] | Edelstahl[◎] |
| Blade shape type | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 3 | 4 | 4 |
| Tool Material Type | Kobalt HSS | Kobalt HSS | Pulvermetallurgischer Stahl PM | Pulvermetallurgischer Stahl PM | Pulvermetallurgischer Stahl PM | Kobalt HSS | Kobalt HSS | Pulvermetallurgischer Stahl PM |
| Machining Application | Fläche / Seite / Nut / Schräge Schnitte | Fläche / Seite / Nut / Schräge Schnitte | Fläche / Seite / Nut / Schräge Schnitte | Fläche / Seite / Nut / Schräge Schnitte | Fläche / Seite | Fläche / Seite / Nut / Schräge Schnitte | Fläche / Seite / Nut / Schräge Schnitte | Fläche / Seite |
| Shank diameter (d)(mm) | 20 | 12 ～ 25 | 10 ～ 20 | 6 | 12 ～ 20 | 10 ～ 20 | 12 ～ 16 | 6 ～ 8 |
| Coating | Für hohe Härte (Silikon-Gruppe) | Für Stähle allgemein (AlCrN etc.) | TiCN | TiCN | Ohne Beschichtung | Für Stähle allgemein (AlCrN etc.) | Für Stähle allgemein (AlCrN etc.) | TiCN |
| Overall Length (L)(mm) | 115 | 85 ～ 130 | 65 ～ 115 | 60 ～ 65 | 110 ～ 175 | 65 ～ 110 | 90 ～ 100 | 80 |
| Torsion Angle (θ) | Standard-Helix (30˚ bis 40˚) | Standard-Helix (30˚ bis 40˚) | Standard-Helix (30˚ bis 40˚) | Standard-Helix (30˚ bis 40˚) | Standard-Helix (30˚ bis 40˚) | Standard-Helix (30˚ bis 40˚) | Standard-Helix (30˚ bis 40˚) | Standard-Helix (30˚ bis 40˚) |
| Base Blade Y/N | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - |
| shank | - | - | - | - | - | - | - | - |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
-
-
Blade length (ℓ)(mm)
-
work material
- Stahl allgemein
- Abgeschreckter und gehärteter Stahl
- Stahl mit hoher Härte
- Edelstahl
- Gusseisen
- Aluminium
- Titan
- Kupfer
- Kunststoff
- Sonstige
- Sonstige 2
- Sonstige 3
- Sonstige 4
-
Blade shape type
- Quadratisch
- Für Nut
-
Number of flutes(sheet)
-
Tool Material Type
- Kobalt HSS
- Pulvermetallurgischer Stahl PM
- HSS-Stahl
- HSS-Legierung
-
Machining Application
-
Shank diameter (d)(mm)
-
Coating
-
Overall Length (L)(mm)
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Underneck length (ℓ1)(mm)
-
shank
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (12)
- OSG (51)
- NACHI(FUJIKOSHI) (11)
- SANKO MFG (8)
- ASAHI TOOLS (2)
- FUKUDA (0)
- DAIICHITOOL (0)
- TAIYO-TOOL (0)
- EIKOSHA (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Rechteckfräser (HSS)
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.