TYPENCODE Suche | *NOT READY*: #CODE

Suchwort-Vorschlag

Vorgeschlagene Teilenummer

Auslaufprodukte

SURUGA SEIKI Halter für optische Geräte

Suche durch Präzisierung der Kategorie der unteren Klasse

Daten, die angezeigt werden sollen: 30; 45; 60

Sortieren nach:

Lieferzeit	Alle Produkte Versand am selben Tag 5 Tage oder weniger 6 Tage oder weniger 8 Tage oder weniger 9 Tage oder weniger 10 Tage oder weniger 11 Tage oder weniger 13 Tage oder weniger 15 Tage oder weniger 16 Tage oder weniger

?* Informationen zur Lieferzeit und Preisen

Kamerahalter / F119

SURUGA SEIKI

A holder for fixing cameras, CCD cameras, and vidicon cameras, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D / 3D CAD Daten verfügbar

ab^∗ ：	116.03 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Spiegelhalter

SURUGA SEIKI

An affordable mirror holder for fixing items such as mirrors or plate beam splitters. The tilt can be finely adjusted in the two axial directions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D / 3D CAD Daten verfügbar

ab^∗ ：	124.96 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Spiegelhalter (Schlitzklemme)

SURUGA SEIKI

A mirror holder with a slit-clamp type lock. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D / 3D CAD Daten verfügbar

ab^∗ ：	152.33 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

3-Achsen-Objektivhalter

SURUGA SEIKI

[Features]
· The B11-40C is employed for the X-axis while the optical axis is configured at 45 mm.
· Replace the lens and/or adapter to allow for use in different types of application.

2D / 3D CAD Daten verfügbar

ab^∗ ：	589.47 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Kardanisch aufgehängter Spiegelhalter

SURUGA SEIKI

A holder for fixing items such as mirrors or plate beam splitters etc. The tilt can be adjusted in the two axial directions. The center of rotation and the center of the mirror always coincide when making fine adjustments.

[Features]
■ F50, F55
· Holders for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted.
· Fine movement of ±4° to 6° is possible, in both θy and θz, by tightening the clamp. Loosening the clamp, allows for coarse movement (adjustment) over 360°.
· A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
· The included standard rod is ø 20, and has a length of 60 mm. However the rod length can be changed. The holder's screw holes are M6P = 1. A40 to A42 rods can be used.
· Mirror Holder F50: For the feeding method, A-type micrometer heads and an E-type screw system are available.
· Horizontally operated type mirror holder F55: Due to the unique horizontal operation method (the operation system is installed in a horizontal direction), the user can operate it without going in front of the optical axis with their hands. A proximity specification is also available.
■ F52
· A holder for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted in the two axial directions.
· The tilt (θy, θz) of the two axes can be finely adjusted by ±2° or ±3° (F52).
· A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
· Items such as mirrors are attached and removed using a threaded ring. Includes a resin protective ring.

2D / 3D CAD Daten verfügbar

ab^∗ ：	211.15 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Adapter-Klemmring

SURUGA SEIKI

An adapter for holding ferrules. Can hold fibers with not only ferrules but also those with SELFOC lenses, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D CAD Daten verfügbar

ab^∗ ：	81.62 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Stange mit Platte

SURUGA SEIKI

[Features]
· Can be fitted with 40 mm stages and holders for Opt Stations, etc.
· Can be arranged as needed and mounted to cross clamps, etc.

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	54.30 €
Minimum Lieferzeit ：	9 Arbeitstage

*Stückpreis Standardkonfiguration

Spiegelhalter (optische Achse 25 mm)

SURUGA SEIKI

A mirror holder with an optical axis height of 25 mm. For use with the Opt Station. Select the most appropriate mounting method so that the held element does not distort when mounted. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D / 3D CAD Daten verfügbar

ab^∗ ：	114.16 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Ringschlüssel / A92

SURUGA SEIKI

A ring wrench for tightening threaded rings. Variable types and fixed types are available in sizes to fit different ring diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D CAD Daten verfügbar

ab^∗ ：	86.59 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Laser-Halter Rund

SURUGA SEIKI

[Features]
· F20 sandwiches the laser between three screws. The optical axis is adjusted by screwing in and out.
· With F21, in addition to the function of F20, it is possible to adjust in the θy direction by operating the screw at the bottom of the holder.
· Both F20 and F21 have two types, L=150 and 250, depending on the length of the laser.
· The included standard rod has a diameter of ø20 and a length of 60, but both the rod diameter and length can be changed upon request.
· The laser holding part can be fixed to positions at 50 mm intervals by removing the fixing screw from the bottom (only F20-150/250).
· The F20 can be attached directly to the breadboard (A65) by removing the rod.

2D / 3D CAD Daten verfügbar

ab^∗ ：	145.58 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Querbewegungs-Halter, Plattenausführung

SURUGA SEIKI

[Features]
· A holder that can support and fix various types of adapter, and finely adjust them in the YZ axes and Yzθyθz axes.
· A plate type cross motion holder with good stability and which can be used for experiments with low optical axes.
· 0.5 mm screws are used for the fine movement parts.
· For the F02-1E type, fine movement of the YZ axes can be made using the operating screw. For the F02-4E type, fine movement of the Yzθyθz axes can be made

2D / 3D CAD Daten verfügbar

ab^∗ ：	276.19 €
Minimum Lieferzeit ：	9 Arbeitstage

*Stückpreis Standardkonfiguration

Kompaktmodell Spiegelhalter von oben bedienbar

SURUGA SEIKI

[Features]
· A small top operated mirror holder with excellent stability and operability.
· Can hold small mirrors up to ø30. The tilt can be adjusted in the two axes.
· The tilt axis can be locked using the included lock nut.
· The mirror can be fixed using either adhesive or via the three-point support method.
· Types with a rod and types without a rod are available.
· With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.

2D / 3D CAD Daten verfügbar

ab^∗ ：	152.33 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Prismenträger mit Feineinstellmechanismus

SURUGA SEIKI

Can rotate prisms, cube beam splitters, and similar other objects and tilt them in the two axes. Prisms are fixed using the slide clamp screw on the upper part and an element clamp screw.

2D / 3D CAD Daten verfügbar

ab^∗ ：	238.79 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Polarisatorhalter mit Feineinstellung

SURUGA SEIKI

[Features]
· A holder consisting of the F62 type polarizer holder with additional fine adjustment functionality.
· Allows for 360° coarse movement with the clamp loosened. With the clamp tightened, it can perform micro adjustments on the micrometer head to ±4°.
· The F63-30N can be fitted with the F69polarizing prism adapter.
· The scale is structured in a way that allows zero point alignment, and so can be set to any angle from the reference angle.
· Calculating the optical axis of the rod stand.

2D / 3D CAD Daten verfügbar

ab^∗ ：	333.66 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Halterungen für Optik-Element-Adapter

SURUGA SEIKI

A bracket to which various types of adapter can be mounted. Can be mounted to a tilt stage. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D / 3D CAD Daten verfügbar

ab^∗ ：	135.16 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Zentrierte Objektivhalter: fixierter Adapter für Kollimationslinse

SURUGA SEIKI

[Features]
· Can be used for the construction of optical systems.

ab^∗ ：	61.41 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Sonderpreis

Irisblende

SURUGA SEIKI

[Features]
· A holder with an iris diaphragm.
· The aperture diameter is variable from ø1.5 to ø27 mm.
· Rotate the aperture-adjustment knob (shared with the clamp) to fix.

2D / 3D CAD Daten verfügbar

ab^∗ ：	209.89 €
	Besonderer Preis
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Rechteckiger Spiegel-Halter

SURUGA SEIKI

[Features]
· A holder for fixing square mirrors, filters, and projection plates, etc.
· Fix by tightening the two screws.
· The holder is for fixing purposes only.
· The holder is available with a width of 60 mm or 100 mm.

2D / 3D CAD Daten verfügbar

ab^∗ ：	68.67 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Spiegelhalter mit hoher Stabilität

SURUGA SEIKI

A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D / 3D CAD Daten verfügbar

ab^∗ ：	152.38 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

5-Achsen-Objektivhalter

SURUGA SEIKI

Replace the lens and/or adapter to allow for use in different types of application. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D / 3D CAD Daten verfügbar

ab^∗ ：	713.22 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

LD-Halterung

SURUGA SEIKI

F511L: fixed type. F512L, F513L: YZ axis adjustable LD holder. Select according to the number of pins and the pin pitch (pin P.C.D.) of the LD.

2D / 3D CAD Daten verfügbar

ab^∗ ：	122.44 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

LD-Halterung (Chip Carrier-Modell)

SURUGA SEIKI

[Features]
· A Chip Carrier type LD holder with a built-in Peltier element.
· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
· The switching for the anode/cathode of the LD can be configured by replacing the jumper pins.
· There are two types of Chip Carrier LD holder. Configure according to the mounting (output) direction of the LD.
· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
· The F129-1 water cooling adapter is also available.
· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.

2D / 3D CAD Daten verfügbar

ab^∗ ：	665.13 €
Minimum Lieferzeit ：	11 Arbeitstage

*Stückpreis Standardkonfiguration

LD-Halterung (To-Paket-Modell)

SURUGA SEIKI

[Features]
· A To-Package type LD holder with a built-in Peltier element.
· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
· Supports LD sizes of ø5.6 (Pin PCD, 2.0) and ø9.0 (Pin PCD, 2.54) for three-pins and for four-pins respectively.
· For common anodes and common cathodes, etc., configure by replacing the jumper pins.
· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
· The F129-1 water cooling adapter is also available.
· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.

2D / 3D CAD Daten verfügbar

ab^∗ ：	665.13 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Sonderpreis

Schraubring

SURUGA SEIKI

A threaded ring for fixing lenses and mirrors. Note that even when the diameters are the same, the shapes can differ depending on the product. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	9.45 €
	Besonderer Preis
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Isolieradapter

SURUGA SEIKI

Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

ab^∗ ：	149.52 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Polarisatorhalter mit Neigung

SURUGA SEIKI

A holder that can retain items such as polarizing plates and wave plates. It can also rotate (θx) and tilt them (θy, θz). Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D / 3D CAD Daten verfügbar

ab^∗ ：	573.01 €
Minimum Lieferzeit ：	11 Arbeitstage

*Stückpreis Standardkonfiguration

Ausrichtungsziel

SURUGA SEIKI

Can be used for optical system constructions.

[Features]
· Used for adjusting the optical axis when building an optical system for the Opt Station.
· Push-down the large target-fixing pin to fix to the tapped hole on the plate board.
· Return the pin upward to install in any position.
· The mark on the target is adjusted to a height of 45 mm.
· Target stickers (black cross on a white base / white cross on a black base) are included.

2D / 3D CAD Daten verfügbar

ab^∗ ：	135.93 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Adapter für Steckverbinder

SURUGA SEIKI

[Features]
· An adapter for optical fiber connectors.
· An FC type receptacle is included as standard, so please select according to the connector.
· The FC type receptacle is designed so that when a connector is inserted, the end surface of the ferrule extends about 0.5 mm from the receptacle surface. Ideal for placing in close proximity to other items.

2D / 3D CAD Daten verfügbar

ab^∗ ：	107.33 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Adapter für Kollimationslinse

SURUGA SEIKI

An adapter for holding ø4 to ø14.5 mm cylindrical items such as collimating lenses, etc. Used by attaching to various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

Mengenrabatt

ab^∗ ：	61.25 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Gleithalterung für Objektiv

SURUGA SEIKI

[Features]
· Used for fixing round/square lenses or cylindrical/rectangular items of any size.
· The attachment and detachment of elements is done by loosening the slide-clamp screw on the side surface, adjusting the position and, after fixing the screws, fixing the element using the clamp screw on the top.
· The F44 can hold cylindrical elements such as lenses, while the F45 is suitable for fixing rectangular elements such as cylindrical lenses.

2D / 3D CAD Daten verfügbar

ab^∗ ：	110.19 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

SELFOC-Adapter für Objektiv

SURUGA SEIKI

An adapter for holding cylindrical items. Used by setting on to fixed type holders and various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D / 3D CAD Daten verfügbar

ab^∗ ：	113.99 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Sensor / Laser-Halter

SURUGA SEIKI

[Features]
· Can adjust the tilt angle of small sensors and laser pointers.
· P.C.D.32 tapped holes are included on the holder surface. Uses these to mount various types of adapter plate.

2D / 3D CAD Daten verfügbar

ab^∗ ：	142.67 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Sensor-Adapter

SURUGA SEIKI

[Features]
· An adapter for holding round sensors and lasers.
· The adapter thickness has been set to 12 mm, increasing the holding force.
· Specify the ø diameter when ordering.

Mengenrabatt

ab^∗ ：	68.19 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Power-Meter-Halter

SURUGA SEIKI

[Features]
· A holder for fixing commercially available power meter sensors.
· Mainly for fixing rectangular power meter sensors. Constructed so that the sensor will not shift, even when the sensor cable is pulled.
· Fixing is done using a method of sandwiching with screws from the top.
· Sensors that can be fixed are of limited availability.
· Can be directly mounted onto bases with the rods removed.

2D / 3D CAD Daten verfügbar

ab^∗ ：	138.13 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Strahllenkungshalter

SURUGA SEIKI

[Features]
· Types in which only the upper mirror is movable and types in which both the upper and lower mirrors are movable are available.
· The pitch of the adjustment screw can be selected from 0.5 mm and 0.25 mm.
· Adhesive fixing and three-point support fixing types are available for the mirror.
· The lower side of the pole is an M16P (= 1 mm) male screw.
· Can be fixed to magnetic bases and plates, etc.

2D / 3D CAD Daten verfügbar

ab^∗ ：	301.20 €
Minimum Lieferzeit ：	9 Arbeitstage

*Stückpreis Standardkonfiguration

Stiftloch-Halter

SURUGA SEIKI

[Features]
· Capable of fixing pinholes and moving them in micro-movement increments in the YZ axis direction.
· Pin holes with an external diameter of ø16 mm can be used.
· Fix pin holes with an M20P = 0.5 threaded ring.
· The optical axis central height is standardized at 25 mm from the bottom.

2D / 3D CAD Daten verfügbar

ab^∗ ：	398.97 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Adapter für Stiftloch

SURUGA SEIKI

Used by attaching to various types of cross motion holder. The applicable diameter of the pin hole is ø16 mm. Attachment and detachment is carried out using a threaded ring system. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	54.47 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Prismenträger

SURUGA SEIKI

[Features]
· Configured so that the optical axis height is at the center of the element when the element is 20 mm, and standardized at 25 mm from the bottom.
· Move the upper sliding part to fix the prism.
· Use the upper knob to fix without having to move the element.
· The F551-20 bottom plate features M4 tapped holes. Mount a rod to change to a rod type.
· F552-20 can be finely adjusted.
· The elements are positioned using the pins in the three locations.

2D / 3D CAD Daten verfügbar

ab^∗ ：	109.79 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Objektivhalter

SURUGA SEIKI

Used for fixing circular items such as lenses, mirrors, and filters etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	52.13 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Adapter für Objektiv

SURUGA SEIKI

An adapter for lenses with an outer diameter of ø10 mm, ø12.7 mm, ø15 mm, ø20 mm, and ø25.4 mm. Used by attaching to various types o cross motion holder.

[Features]
· Used by attaching to various types of cross motion holder. Various types of single lens.
· Lens attachment and detachment is carried out using a threaded ring system.
Note: Includes threaded rings and resin rings.
Note: A ring wrench for tightening threaded rings.

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	53.73 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Spiegelhalter von oben betrieben

SURUGA SEIKI

A top operated mirror holder with excellent stability and operability. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D / 3D CAD Daten verfügbar

ab^∗ ：	228.59 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Adapter für Polarisator-Prisma

SURUGA SEIKI

An adapter that can retain polarizing prisms and other similar items. Can be mounted to polarizer holders. Can be mounted to holders for F62, F63 and F64 elements which have a diameter of ø30.

2D / 3D CAD Daten verfügbar

ab^∗ ：	95.36 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Polarisatorhalter

SURUGA SEIKI

[Features]
· A holder used for retaining and rotating polarizing plates, polarizing filters, and wave plates, etc.
· Can be manually rotated 360°.

2D / 3D CAD Daten verfügbar

ab^∗ ：	181.17 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Polarisatorhalter (optische Achse: 25 mm, fein einstellbar)

SURUGA SEIKI

[Features]
· A holder used for retaining and rotating polarizing plates, polarizing filters, and wave plates, etc.
· The optical axis height is standardized at 25 mm from the bottom.
· Uses a threaded ring to fix devices.
· An M4 male-threaded rod is attached.

2D / 3D CAD Daten verfügbar

ab^∗ ：	266.10 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Querbewegungs-Halter (□60-Modell)

SURUGA SEIKI

[Features]
· A holder that can support and fix various types of adapter, and finely adjust them in the YZ axes and Yzθyθz axes.
· 0.5 mm screws are used for the fine movement parts.
· The F02-1E has a thickness of just 10 mm, and so is ideal for use in tight spaces or in close proximity to other types.
· For the F02-1E type, fine movement of the YZ axes can be made using the operating screw. For the F02-4E type, fine movement of the Yzθyθz axes can be made

2D / 3D CAD Daten verfügbar

ab^∗ ：	266.71 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration


Warenzeichen
Artikelserie
CAD
ab^∗
Minimum Lieferzeit ：

																	Sonderpreis							Sonderpreis
Warenzeichen	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI
Artikelserie	Kamerahalter / F119	Spiegelhalter	Spiegelhalter (Schlitzklemme)	3-Achsen-Objektivhalter	Kardanisch aufgehängter Spiegelhalter	Adapter-Klemmring	Stange mit Platte	Spiegelhalter (optische Achse 25 mm)	Ringschlüssel / A92	Laser-Halter Rund	Querbewegungs-Halter, Plattenausführung	Kompaktmodell Spiegelhalter von oben bedienbar	Prismenträger mit Feineinstellmechanismus	Polarisatorhalter mit Feineinstellung	Halterungen für Optik-Element-Adapter	Zentrierte Objektivhalter: fixierter Adapter für Kollimationslinse	Irisblende	Rechteckiger Spiegel-Halter	Spiegelhalter mit hoher Stabilität	5-Achsen-Objektivhalter	LD-Halterung	LD-Halterung (Chip Carrier-Modell)	LD-Halterung (To-Paket-Modell)	Schraubring	Isolieradapter	Polarisatorhalter mit Neigung	Ausrichtungsziel	Adapter für Steckverbinder	Adapter für Kollimationslinse	Gleithalterung für Objektiv	SELFOC-Adapter für Objektiv	Sensor / Laser-Halter	Sensor-Adapter	Power-Meter-Halter	Strahllenkungshalter	Stiftloch-Halter	Adapter für Stiftloch	Prismenträger	Objektivhalter	Adapter für Objektiv	Spiegelhalter von oben betrieben	Adapter für Polarisator-Prisma	Polarisatorhalter	Polarisatorhalter (optische Achse: 25 mm, fein einstellbar)	Querbewegungs-Halter (□60-Modell)
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
ab^∗	116.03 € *Stückpreis Standardkonfiguration	124.96 € *Stückpreis Standardkonfiguration	152.33 € *Stückpreis Standardkonfiguration	589.47 € *Stückpreis Standardkonfiguration	211.15 € *Stückpreis Standardkonfiguration	81.62 € *Stückpreis Standardkonfiguration	54.30 € *Stückpreis Standardkonfiguration Mengenrabatt	114.16 € *Stückpreis Standardkonfiguration	86.59 € *Stückpreis Standardkonfiguration	145.58 € *Stückpreis Standardkonfiguration	276.19 € *Stückpreis Standardkonfiguration	152.33 € *Stückpreis Standardkonfiguration	238.79 € *Stückpreis Standardkonfiguration	333.66 € *Stückpreis Standardkonfiguration	135.16 € *Stückpreis Standardkonfiguration	61.41 € *Stückpreis Standardkonfiguration	209.89 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis	68.67 € *Stückpreis Standardkonfiguration	152.38 € *Stückpreis Standardkonfiguration	713.22 € *Stückpreis Standardkonfiguration	122.44 € *Stückpreis Standardkonfiguration	665.13 € *Stückpreis Standardkonfiguration	665.13 € *Stückpreis Standardkonfiguration	9.45 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis Mengenrabatt	149.52 € *Stückpreis Standardkonfiguration	573.01 € *Stückpreis Standardkonfiguration	135.93 € *Stückpreis Standardkonfiguration	107.33 € *Stückpreis Standardkonfiguration	61.25 € *Stückpreis Standardkonfiguration Mengenrabatt	110.19 € *Stückpreis Standardkonfiguration	113.99 € *Stückpreis Standardkonfiguration	142.67 € *Stückpreis Standardkonfiguration	68.19 € *Stückpreis Standardkonfiguration Mengenrabatt	138.13 € *Stückpreis Standardkonfiguration	301.20 € *Stückpreis Standardkonfiguration	398.97 € *Stückpreis Standardkonfiguration	54.47 € *Stückpreis Standardkonfiguration Mengenrabatt	109.79 € *Stückpreis Standardkonfiguration	52.13 € *Stückpreis Standardkonfiguration Mengenrabatt	53.73 € *Stückpreis Standardkonfiguration Mengenrabatt	228.59 € *Stückpreis Standardkonfiguration	95.36 € *Stückpreis Standardkonfiguration	181.17 € *Stückpreis Standardkonfiguration	266.10 € *Stückpreis Standardkonfiguration	266.71 € *Stückpreis Standardkonfiguration
Minimum Lieferzeit ：	5 Arbeitstage	6 Arbeitstage	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage	10 Arbeitstage	9 Arbeitstage	5 Arbeitstage	10 Arbeitstage	5 Arbeitstage	9 Arbeitstage	5 Arbeitstage	5 Arbeitstage	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	Versand am selben Tag	5 Arbeitstage	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	11 Arbeitstage	5 Arbeitstage	Versand am selben Tag	10 Arbeitstage	11 Arbeitstage	10 Arbeitstage	5 Arbeitstage	10 Arbeitstage	5 Arbeitstage	10 Arbeitstage	5 Arbeitstage	10 Arbeitstage	5 Arbeitstage	9 Arbeitstage	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	5 Arbeitstage	5 Arbeitstage	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	5 Arbeitstage