YANASE Räder mit Schaft（Type：Klappe mit Welle）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Fächerschleifer mit Welle, einfach austauschbar
YANASE
[Features]
· This is the product you always wanted.
· The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
· Capable of heavy polishing with a soft touch.
· It is a retractable type, providing a large polishing area and beautiful finished surface.
· One-touch shaft attachmentab∗ ： 3.07 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer
YANASE
A product which can polish both bottom and side surfaces at the same time.
[Features]
· The tip (bottom) can also be used for added convenience.
· Polishing cloth extends further than the shaft so the bottom and sides can be used for 2 surface simultaneous polishing.
· Unlikely to clog, allowing a uniform finish to be achieved throughout.
· It is elastic, easy to fit to the workpiece.
· Due to heat dissipation, it does not alter the polished material.
· Excellent autogenous properties.
· Ideal for polishing flat surfaces, bottom surfaces and cornersab∗ ： 13.21 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer mit Welle
YANASE
High-quality standard products that come in a vast variety of sizes and grain sizes.
[Features]
· A wide range of sizes and particle sizes with high quality.
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.ab∗ ： 7.36 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Nylon-Polierrad (hart)
YANASE
Ideal for removal of scratches and rust. Can also be used for hairline finishing.
[Features]
· Selectable from abundant granularity and sizes.
· It removes burrs without scraping, with no secondary burrs.
· As it is soft, elastic and has good adaptability, it prevents fatigue.ab∗ ： 9.84 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Nylon-Rad mit Welle
YANASE
Prevents over-scraping, and produces a uniform finished surface with no clogging.
[Features]
· Unilon's standard product.
· Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
· Its autogenous properties prevent clogging.
· Polishes without scratching.
· Finishes the surface without scraping the material.
· Flexible and fits perfectly to the curved surfaces.ab∗ ： 14.95 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer mit Welle
YANASE
[Features]
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.ab∗ ： 6.32 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Application |
| Type |
| Material |
| Outer Diameter(mm) |
| Width(mm) |
| Shaft Diameter(mm) |
| Particle Size(#) |
| Stationary Diameter(mm) |
| Screw Hole Diameter(mm) |
|
|
|
|
|
| |
| Warenzeichen | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE |
| Artikelserie | ||||||
| ab∗ | 3.07 € *Stückpreis Standardkonfiguration | 13.21 € *Stückpreis Standardkonfiguration | 7.36 € *Stückpreis Standardkonfiguration | 9.84 € *Stückpreis Standardkonfiguration | 14.95 € *Stückpreis Standardkonfiguration | 6.32 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 8 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage |
| Application | Poliert | Poliert | Poliert | Poliert | Poliert | Poliert |
| Type | Klappe mit Welle | Klappe mit Welle | Klappe mit Welle | Klappe mit Welle | Klappe mit Welle | Klappe mit Welle |
| Material | - | - | - | - | - | - |
| Outer Diameter(mm) | 10 ～ 25 | 10 ～ 25 | 10 ～ 30 | 10 ～ 25 | 50 ～ 100 | 10 ～ 40 |
| Width(mm) | 10 ～ 25 | 20 ～ 25 | 5 ～ 10 | 13 ～ 25 | 25 | 10 ～ 30 |
| Shaft Diameter(mm) | - | 3 ～ 6 | 3 | 3 ～ 6 | 6 | 3 ～ 6 |
| Particle Size(#) | 60 ～ 240 | 60 ～ 100 | 80 ～ 600 | 600 ～ 1500 | 120 ～ 600 | 40 ～ 600 |
| Stationary Diameter(mm) | - | - | - | - | - | - |
| Screw Hole Diameter(mm) | 3 ～ 6 | - | - | - | - | - |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Application
- Poliert
- Poliert
-
Type
- Klappe mit Welle
- Band
- Schleifbandkörper
- Papier
- Halter
-
Material
- Baumwolle
- Sisal
- Flanell
- Polieren
- Filz
-
Outer Diameter(mm)
-
Width(mm)
-
Shaft Diameter(mm)
-
Particle Size(#)
-
Stationary Diameter(mm)
-
Screw Hole Diameter(mm)
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (2)
- TRUSCO NAKAYAMA (19)
- ICHIGUCHI (17)
- YANASE (6)
- MURAKO (4)
- NAKANISHI (3)
- NIHON SEIMITSU KIKAI KOSAKU (1)
- NEWREGISTON (1)
- SUMFLEX (1)
- H & H (0)
- OFFICE MINE (0)
- MINITOR (0)
- DREMEL (0)
- UHT (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Räder mit Schaft
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.