FRL-Einheiten（Manometer：Keine (Druckanschlussstopfen nicht verfügbar)）

?* Informationen zur Lieferzeit und Preisen

• 

  Druckregeler mit Filter / Filterdruckregler AW20 bis 60-B, Filterdruckregler mit Rücklauffunktion AW20K bis 60K-B

  SMC

  Filter regulators and filter regulators with backflow function, with both filter and regulator integrated in one unit.
  [Features]
  · Helps save on space, and requires less piping.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	32.02 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Druckregeler mit Abscheider / Nebelabscheider-Regler AWM20 bis 40/Mikro-Nebelabscheider-Regler AWD20 bis 40

  SMC

  SMC Mist Separator Regulator.
  [Features]
  · The AWM Series combines a regulator and mist separator into one unit. Use for clean air blowing applications. (Filtration: 0.3 μm)
  · The AWD Series combines a regulator and micro-sized mist separator into one unit. Use for ultra-clean air blowing applications. (Filtration: 0.01 μm)

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	60.32 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  AC10-40-A, Wartungsgeräte (neue FRL) in Modulbauweise, Luftfilter + Regler + Druckluftöler

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	56.18 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  AW10-40-A, AW Filter / Regler-Kombination

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	23.69 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  AC20D-40D-A, Wartungsgeräte (neue FRL) in Modulbauweise, Filter Regler + Mikrofilter

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	61.53 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Filter-Reglventile / modular / Weiß

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	14 Arbeitstage

• 

  Softstartventil, AV2000 / 3000 / 4000 / 5000

  SMC

  Low power consumption Soft Start-Up Valve AV2000/3000/4000/5000 Series.
  [Features]
  · Start-up valves for a low-speed air supply which gradually raises the initial pressure in an air system and for quick exhausting by cutting off the air supply.
  · Includes manually operated supply and exhaust functions.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	148.13 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  AV2000 / 3000 / 4000 / 5000-A, Softstartventil

  SMC

  SMC soft start-up valve.
  [Features]
  · Start-up valves for a low-speed air supply which gradually raises the initial pressure in an air system and for quick exhausting by cutting off the air supply.
  · Power Consumption: 0.35 W.
  · Improved flow rate characteristics: Up to 2.3 times C [dm3/(s·bar)]: 9.2.
  · Energy saving: No air flow when switching the main valve.
  · Improved adjustment sensitivity with a low speed air supply.
  · Features a built-in silencer to save on space and for less overall work.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	141.06 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Modulare Ausführung FRL-Standardserie Weiß

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Compact modularization: Design for each F.R.L device focused on making it more compact. Assembled dimensions are accurately calculated with a simple calculation.
  · Lightweight: The material combination allows for both strength and low weight.
  · Long life element: The elements are constructed from a unique fiber structure that is rough on the surface and becomes finer the further inward it goes (PAT.PEND). Almost no clogs. No rust concerns.
  · Space-saving embedded pressure meter: Past models had a pressure meter that stuck out of the front surface, wasting space or being at risk of striking the employees. This embedded design is both clean and an improvement to safety.
  · Prevents oil drips when reverse pressure is applied such as when residual exhaust valves release pressure.
  · Taking safety into further consideration, this device is equipped with a corrosive resistant plastic bowl.
  · Gauge plug is sealed even here a pipe plug is not installed.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	13 Arbeitstage

• 

  Modulare Ausführung WL-Standardserie Weiß

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	14 Arbeitstage

• 

  Modulare Ausführung WM-Standardserie Weiß

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	14 Arbeitstage

• 

  Modulare Ausführung Filter / Regler Standardserie Weiß

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Series featuring built in reverse flow feature, 5μm dust removal, and 0.3μm tar removal

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	14 Arbeitstage

• 

  AC10A-40A-A, Wartungsgeräte (neue FRL) in Modulbauweise, Filter Regler + Druckluftöler

  SMC

  Air Combination Filter Regulator + Lubricator with a bowl that is completely covered by transparent bowl guard.
  [Features]
  · The inside can be seen from all angles (360°).
  · The bowl is protected from the external environment, ensuring high levels of safety.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	44.35 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  AC10B-40B-A, Wartungsgeräte (neue FRL) in Modulbauweise, Luftfilter + Regler

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	36.69 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Air Combination, Air Filter + Mist Separator + Regulator, AC20C-A to AC40C-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	73.35 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Filter/Regler / Filter-Regelventil, 10/20/21-AW-B, 10/20/21-AWKB

  SMC

  [Eigenschaften]
  „10er-Serie“: Saubere Serie
  · Geeignet für Reinraumumgebung.
  · Verhindert die Entstehung von Staub in Reinräumen.
  „20er-Serie“: Kupferfreie und fluorfreie Spezifikationen
  · Geeignet für Umgebungen, in denen Kupfer und fluorhaltige Materialien unerwünscht sind.
  · Die Außenabmessungen entsprechen denen des Standardmodells.
  „21-Serie“: Kupfer-/Fluor-/Silikonfrei + geringe Staubentwicklung
  · Geeignet für Umgebungen mit Einschränkungen bei Kupfer-, Fluor- und Silikonmaterialien.
  · Aufbau entspricht der Clean-Serie (Fett und Verpackungsform unterscheiden sich von der Clean-Serie).

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	50.56 €
  Minimum Lieferzeit ：	26 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...