Auswerferstifte, zylindrisch, seitliche Gasentlüftung（L dimension tolerance (Reference tolerance)：+0.02/0）
Selection Support: Straight Ejector Pins
- Technical information
- STRAIGHT EJECTOR PINS
?* Informationen zur Lieferzeit und Preisen
-
Auswerferstifte / zylindrischer Kopf / EN 1.3343 Equiv. / Gasentlüftung / Dimensionen konfigurierbar
MISUMI
- 2D / 3D CAD Daten verfügbar
Jetzt konfigurierenMinimum Lieferzeit ： auf Anfrage
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
| Shape type |
| Material |
| Shaft diameter tolerance (Reference tolerance) |
| L dimension tolerance (Reference tolerance) |
| Surface treatment |
| Head thickness |
| D/P (Shaft diameter)(mm) |
| Tip shape |
| Gas release shape |
| Character engraving type |
| Number of engraving characters |
| |
| Warenzeichen | MISUMI |
| Artikelserie | Auswerferstifte / zylindrischer Kopf / EN 1.3343 Equiv. / Gasentlüftung / Dimensionen konfigurierbar |
| CAD |
|
| ab∗ | - |
| Minimum Lieferzeit | auf Anfrage |
| Shape type | Gas release |
| Material | EN 1.3343 Equiv. |
| Shaft diameter tolerance (Reference tolerance) | -0.01/-0.02 / 0/-0.005 |
| L dimension tolerance (Reference tolerance) | +0.02/0 |
| Surface treatment | No |
| Head thickness | 4mm(T4) |
| D/P (Shaft diameter)(mm) | 0.6 ～ 1.2 |
| Tip shape | No |
| Gas release shape | Single flat cutting |
| Character engraving type | No |
| Number of engraving characters | No |
Loading...
Filtern nach:
-
Shape type
- Gas release
-
Material
- EN 1.3343 Equiv.
-
Shaft diameter tolerance (Reference tolerance)
- -0.01/-0.02
- 0/-0.005
-
L dimension tolerance (Reference tolerance)
- +0.02/0
- +0.02/0 or +0.05/0
-
Surface treatment
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
D/P (Shaft diameter)(mm)
-
Tip shape
-
Gas release shape
-
Single flat cutting
-
Four flats cutting
-
With gas vent
-
Single flat cutting
-
Character engraving type
-
Number of engraving characters
Marke
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Auswerferstifte, zylindrisch, seitliche Gasentlüftung
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.