Auswerferstifte, zylindrisch, abgestuft, stirnseitige Gravur（Character engraving type：Concave character (Sequential numbering)）
Selection Support: Stepped Ejector Pins
- Technical information
- STEPPED EJECTOR PINS
?* Informationen zur Lieferzeit und Preisen
-
Jetzt konfigurieren
Minimum Lieferzeit ： auf Anfrage
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
| Material |
| Tip diameter tolerance (Reference tolerance) |
| Shaft diameter tolerance (Reference tolerance) |
| Surface treatment |
| Head thickness |
| D (Shaft diameter)(mm) |
| P (Tip diameter)(mm) |
| Tip shape |
| Character engraving type |
| Number of engraving characters |
| Gas release shape |
| |
| Warenzeichen | MISUMI |
| Artikelserie | |
| CAD |
|
| ab∗ | - |
| Minimum Lieferzeit | auf Anfrage |
| Material | EN 1.3343 Equiv. |
| Tip diameter tolerance (Reference tolerance) | 0/-0.005 / -0.01/-0.02 |
| Shaft diameter tolerance (Reference tolerance) | 0/-0.02 |
| Surface treatment | No |
| Head thickness | 4mm(T4) / 6mm(JIS) / 8mm(JIS) |
| D (Shaft diameter)(mm) | 1 ～ 12 |
| P (Tip diameter)(mm) | 0.3 ～ 11.9 |
| Tip shape | No |
| Character engraving type | Concave character (Sequential numbering) |
| Number of engraving characters | 1 characters / 2 characters |
| Gas release shape | No |
Loading...
Filtern nach:
-
Material
- EN 1.3343 Equiv.
- EN 1.2344 Equiv.
-
Tip diameter tolerance (Reference tolerance)
- 0/-0.005
- -0.01/-0.02
-
Shaft diameter tolerance (Reference tolerance)
- 0/-0.02
-
Surface treatment
- No
- Nitrided
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
D (Shaft diameter)(mm)
-
P (Tip diameter)(mm)
[0.3-11.9/0.01mmTeile]
-
Tip shape
-
Character engraving type
- Concave character
- Concave character (Sequential numbering)
-
Number of engraving characters
- 1 characters
- 2 characters
- 3 characters
- 4 characters
- 5 characters
-
Gas release shape
Marke
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Auswerferstifte, zylindrisch, abgestuft, stirnseitige Gravur
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.