TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Demonstriert hohe Leistung bei der Bearbeitung von allgemeinem Stahl, EN 1.4301 Equiv. (gesintert) und wärmebehandeltem Stahl (bis zu 50 HRC)
-Durch die Annahme der 3-Schneiden-Form ist er resistent gegen Rattern und kann vom Eintauchen bis zum Einstechen ohne Stufen arbeiten
-Die einzigartige Form der Spanleitstufe ermöglicht das Einstechen mit einer Schnitttiefe, die der eines 2-Schneiden-Werkzeugs entspricht
-Vergleichbar mit 30°-Spiralwinkel-Vierkantfräsern, sind sowohl Rotation als auch Vorschub mehr als doppelt so schnell
-Der 45°-Spiralwinkel macht ihn ideal für die Hochgeschwindigkeitsbearbeitung im Vergleich zu Allzweckfräsern mit 30°-Spiralwinkel
-Die Beschichtung hat eine hohe Oxidationsbeständigkeit und eine hohe Härte und erreicht eine lange Lebensdauer. Effektiv bei Hochgeschwindigkeitsbearbeitung und Trockenbearbeitung als Beschichtungseigenschaften
-Kann nachgeschliffen werden. Bitte beachten Sie die Seite "Nachschleifservice" für Anwendungsprozeduren, Leistungsspektrum, Preise, etc.
- TS
- General Steel
- 3 Flutes
- R (Regular)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Arbeitstage | 6 | 21 | 6 | 60 | 26 ～ 42 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 8 Arbeitstage | 6.5 | 23 | 8 | 70 | 28 ～ 46 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 | 8 Arbeitstage | 7 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 | 8 Arbeitstage | 7.5 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 | 8 Arbeitstage | 8 | 26 | 8 | 75 | 31 ～ 51 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 8 Arbeitstage | 9 | 26 | 10 | 80 | 31 ～ 50 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 | 8 Arbeitstage | 10 | 34 | 10 | 90 | 39 ～ 60 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 8 Arbeitstage | 11 | 34 | 12 | 100 | 39 ～ 70 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 | 8 Arbeitstage | 12 | 38 | 12 | 100 | 43 ～ 70 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 8 Arbeitstage | 16 | 48 | 16 | 110 | 58 ～ 78 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 8 Arbeitstage | 20 | 56 | 20 | 130 | 66 ～ 92 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 7 Arbeitstage | 6 | 21 | 6 | 60 | 26 ～ 42 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 | 7 Arbeitstage | 6.5 | 23 | 8 | 70 | 28 ～ 46 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 | 7 Arbeitstage | 7 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 | 7 Arbeitstage | 7.5 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 | 7 Arbeitstage | 8 | 26 | 8 | 75 | 31 ～ 51 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 | 7 Arbeitstage | 9 | 26 | 10 | 80 | 31 ～ 50 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 | 7 Arbeitstage | 10 | 34 | 10 | 90 | 39 ～ 60 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 | 7 Arbeitstage | 11 | 34 | 12 | 100 | 39 ～ 70 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 | 7 Arbeitstage | 12 | 38 | 12 | 100 | 43 ～ 70 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 | 7 Arbeitstage | 16 | 48 | 16 | 110 | 53 ～ 78 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 | 7 Arbeitstage | 20 | 56 | 20 | 130 | 61 ～ 92 | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
49.37 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 4 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
56.75 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 6 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
46.40 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 7 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
51.02 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 8 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
53.97 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 10 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
48.68 € | 1 | Verfügbar | 5 Arbeitstage | 2.8 | 13 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
48.52 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 16 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
57.37 € | 1 | Verfügbar | 5 Arbeitstage | 3.5 | 18 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
49.29 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 18 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
50.65 € | 1 | Verfügbar | 5 Arbeitstage | 4.5 | 19 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
52.05 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 21 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
64.32 € | 1 | Verfügbar | 5 Arbeitstage | 5.5 | 21 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
56.81 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 21 | 6 | 60 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 2 | ● | |
60.93 € | 1 | Verfügbar | 5 Arbeitstage | 6.5 | 23 | 8 | 70 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
64.87 € | 1 | Verfügbar | 5 Arbeitstage | 7 | 24 | 8 | 70 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
66.01 € | 1 | Verfügbar | 5 Arbeitstage | 7.5 | 24 | 8 | 70 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
75.59 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 26 | 8 | 75 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 2 | ● | |
75.84 € | 1 | Verfügbar | 5 Arbeitstage | 9 | 26 | 10 | 80 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
101.41 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 34 | 10 | 90 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 2 | ● | |
129.31 € | 1 | Verfügbar | 5 Arbeitstage | 11 | 34 | 12 | 100 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
114.22 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 38 | 12 | 100 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 2 | ● | |
219.72 € | 1 | Verfügbar | 5 Arbeitstage | 16 | 48 | 16 | 110 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 2 | ● | |
292.79 € | 1 | Verfügbar | 5 Arbeitstage | 20 | 56 | 20 | 130 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 2 | ● |
Loading...
Spezifikationen
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| TSC-HEM3R (Standard) TSC-HPEM3R (Sharp Edge) |
1 | 4 | 60 | 6 | 1 |
| 1.5 | 6 | 60 | 6 | 1 | |
| 1.8 | 7 | 60 | 6 | 1 | |
| 2 | 8 | 60 | 6 | 1 | |
| 2.5 | 10 | 60 | 6 | 1 | |
| 2.8 | 13 | 60 | 6 | 1 | |
| 3 | 16 | 60 | 6 | 1 | |
| 3.5 | 18 | 60 | 6 | 1 | |
| 4 | 18 | 60 | 6 | 1 | |
| 4.5 | 19 | 60 | 6 | 1 | |
| 5 | 21 | 60 | 6 | 1 | |
| 5.5 | 21 | 60 | 6 | 1 | |
| 6 | 21 | 60 | 6 | 2 | |
| 6.5 | 23 | 70 | 8 | 1 | |
| 7 | 24 | 70 | 8 | 1 | |
| 7.5 | 24 | 70 | 8 | 1 | |
| 8 | 26 | 75 | 8 | 2 | |
| 9 | 26 | 80 | 10 | 1 | |
| 10 | 34 | 90 | 10 | 2 | |
| 11 | 34 | 100 | 12 | 1 | |
| 12 | 38 | 100 | 12 | 2 | |
| 16 | 48 | 110 | 16 | 2 | |
| 20 | 56 | 130 | 20 | 2 |
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Has a 3-flute shape to be strong against chatter and is capable of stepless grooving.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 3 | Model | Quadratisch |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) | Tolerance of OD(mm) | 0 ~ -0.02 |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Nut
- Thrust (Z-Feed)
- Inclined Cutting
- Countersunk
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-HEM3R
- SN-TSC-HPEM3R
- SNR-TSC-HEM3R
- SNR-TSC-HPEM3R
- TSC-HEM3R
- TSC-HPEM3R
-
Geometry
- Sharp Corner
- Mit Führung
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.