TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Demonstriert hohe Leistung bei der Bearbeitung von allgemeinem Stahl, EN 1.4301 Equiv. (gesintert) und wärmebehandeltem Stahl (bis zu 50 HRC)
-Reguläre 2-Nuten-Größe, die für eine breite Palette von Anwendungen verwendet werden kann
-Optimal für die Bearbeitung im niedrigen bis mittleren Drehzahlbereich aufgrund des universellen 30°-Spiralwinkels
-Ist mit einer Beschichtung mit hoher Oxidationsbeständigkeit und hoher Härte ausgestattet und erreicht eine lange Nutzungsdauer. Effektiv bei Hochgeschwindigkeitsbearbeitung und Trockenbearbeitung als Beschichtungseigenschaften
-Kann nachgeschliffen werden. Bitte beachten Sie die Seite "Nachschleifservice" für Anwendungsprozeduren, Leistungsspektrum, Preise, etc.
- TS
- General Steel
- 2 Flutes
- R (Regular)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Arbeitstage | 6 | 18 | 6 | 60 | 23 ～ 42 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 8 Arbeitstage | 7 | 21 | 8 | 65 | 26 ～ 41 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 | 8 Arbeitstage | 8 | 24 | 8 | 70 | 29 ～ 46 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 8 Arbeitstage | 9 | 27 | 10 | 75 | 32 ～ 45 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 | 8 Arbeitstage | 10 | 30 | 10 | 80 | 35 ～ 50 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 8 Arbeitstage | 12 | 36 | 12 | 85 | 41 ～ 55 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 8 Arbeitstage | 16 | 48 | 16 | 110 | 58 ～ 73 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 8 Arbeitstage | 20 | 60 | 20 | 130 | 70 ～ 87 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 | 7 Arbeitstage | 6 | 18 | 6 | 60 | 23 ～ 42 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 | 7 Arbeitstage | 7 | 21 | 8 | 65 | 26 ～ 41 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 | 7 Arbeitstage | 8 | 24 | 8 | 70 | 29 ～ 46 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 | 7 Arbeitstage | 9 | 27 | 10 | 75 | 32 ～ 45 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 | 7 Arbeitstage | 10 | 30 | 10 | 80 | 35 ～ 50 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 | 7 Arbeitstage | 12 | 36 | 12 | 85 | 41 ～ 55 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 | 7 Arbeitstage | 16 | 48 | 16 | 110 | 53 ～ 78 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 | 7 Arbeitstage | 20 | 60 | 20 | 130 | 65 ～ 92 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
29.26 € | 1 | Verfügbar | 5 Arbeitstage | 0.2 | 0.6 | 3 | 40 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
24.30 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.9 | 3 | 40 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
26.90 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 1.2 | 3 | 40 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
13.74 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 1.5 | 3 | 40 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
21.20 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 1.8 | 3 | 40 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
21.98 € | 1 | Verfügbar | 5 Arbeitstage | 0.7 | 2.1 | 3 | 40 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
15.17 € | 1 | Verfügbar | 5 Arbeitstage | 0.8 | 2.4 | 3 | 40 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
22.54 € | 1 | Verfügbar | 5 Arbeitstage | 0.9 | 2.7 | 3 | 40 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
12.59 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 3 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
15.47 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 3.6 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
66.88 € | 1 | Verfügbar | 5 Arbeitstage | 1.3 | 3.9 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
51.16 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 4.2 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
13.92 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 4.5 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
58.38 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 4.8 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
44.60 € | 1 | Verfügbar | 5 Arbeitstage | 1.7 | 5.1 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
15.47 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 5.4 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
43.21 € | 1 | Verfügbar | 5 Arbeitstage | 1.9 | 5.7 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
13.54 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 6 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
19.49 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 6 | 6 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
14.36 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 7.5 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
30.09 € | 1 | Verfügbar | 5 Arbeitstage | 2.8 | 8.4 | 4 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
15.63 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 9 | 6 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
56.30 € | 1 | Verfügbar | 13 Arbeitstage | 3.04 | 10.5 | 6 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
56.30 € | 1 | Verfügbar | 13 Arbeitstage | 3.07 | 10.5 | 6 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
56.30 € | 1 | Verfügbar | 13 Arbeitstage | 3.08 | 10.5 | 6 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
29.26 € | 1 | Verfügbar | 5 Arbeitstage | 3.5 | 10.5 | 6 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
56.30 € | 1 | Verfügbar | 13 Arbeitstage | 3.2 | 10.5 | 6 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
56.30 € | 1 | Verfügbar | 13 Arbeitstage | 3.3 | 10.5 | 6 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
56.30 € | 1 | Verfügbar | 13 Arbeitstage | 3.42 | 10.5 | 6 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
56.30 € | 1 | Verfügbar | 13 Arbeitstage | 3.47 | 10.5 | 6 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
56.30 € | 1 | Verfügbar | 13 Arbeitstage | 3.48 | 10.5 | 6 | 45 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
42.61 € | 1 | Verfügbar | 13 Arbeitstage | 3.65 | 12 | 6 | 50 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
42.61 € | 1 | Verfügbar | 13 Arbeitstage | 3.8 | 12 | 6 | 50 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
18.31 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 12 | 6 | 50 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
58.13 € | 1 | Verfügbar | 13 Arbeitstage | 4.02 | 13.5 | 6 | 50 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
58.13 € | 1 | Verfügbar | 13 Arbeitstage | 4.03 | 13.5 | 6 | 50 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
58.13 € | 1 | Verfügbar | 13 Arbeitstage | 4.05 | 13.5 | 6 | 50 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
50.85 € | 1 | Verfügbar | 5 Arbeitstage | 4.5 | 13.5 | 6 | 50 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
58.13 € | 1 | Verfügbar | 13 Arbeitstage | 4.15 | 13.5 | 6 | 50 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
43.33 € | 1 | Verfügbar | 13 Arbeitstage | 4.97 | 15 | 6 | 55 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
43.33 € | 1 | Verfügbar | 13 Arbeitstage | 4.99 | 15 | 6 | 55 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
19.10 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 15 | 6 | 55 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Stocked Product | 1 | ● | |
59.56 € | 1 | Verfügbar | 13 Arbeitstage | 5.05 | 16.5 | 6 | 55 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ | |
59.56 € | 1 | Verfügbar | 13 Arbeitstage | 5.07 | 16.5 | 6 | 55 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Manufactured Product | 1 | □ |
Loading...
Spezifikationen
Model Number
TSC-EM2R (Standard) / TSC-PEM2R (Sharp Edge)
| Outer Diameter D |
Shank Diameter d |
Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | ● Stocked Product □ Manufactured Product |
| 0.2 | — | 3 | 0.6 | 40 | 1 | ● |
| 0.3 | — | 3 | 0.9 | 40 | 1 | ● |
| 0.4 | — | 3 | 1.2 | 40 | 1 | ● |
| 0.5 | — | 3 | 1.5 | 40 | 1 | ● |
| 0.6 | — | 3 | 1.8 | 40 | 1 | ● |
| 0.7 | — | 3 | 2.1 | 40 | 1 | ● |
| 0.8 | — | 3 | 2.4 | 40 | 1 | ● |
| 0.9 | — | 3 | 2.7 | 40 | 1 | ● |
| 1 | — | 4 | 3 | 45 | 1 | ● |
| 1.1 | — | 4 | 3.3 | 45 | 1 | ● |
| 1.2 | — | 4 | 3.6 | 45 | 1 | ● |
| 1.3 | — | 4 | 3.9 | 45 | 1 | ● |
| 1.4 | — | 4 | 4.2 | 45 | 1 | ● |
| 1.5 | — | 4 | 4.5 | 45 | 1 | ● |
| 1.6 | — | 4 | 4.8 | 45 | 1 | ● |
| 1.7 | — | 4 | 5.1 | 45 | 1 | ● |
| 1.8 | — | 4 | 5.4 | 45 | 1 | ● |
| 1.9 | — | 4 | 5.7 | 45 | 1 | ● |
| 1.90 ~ 1.99 | — | 4 | 6 | 45 | 1 | □ (Standard Only) |
| 2 | — | 4 | 6 | 45 | 1 | ● |
| 2 | 6 | 6 | 6 | 45 | 1 | ● |
| 2.25 ~ 2.49 | — | 4 | 7.5 | 45 | 1 | □ (Standard Only) |
| 2.5 | — | 4 | 7.5 | 45 | 1 | ● |
| 2.51 ~ 2.79 | — | 4 | 8.4 | 45 | 1 | □ (Standard Only) |
| 2.8 | — | 4 | 8.4 | 45 | 1 | ● |
| 2.81 ~ 2.99 | — | 6 | 9 | 45 | 1 | □ (Standard Only) |
| 3 | — | 6 | 9 | 45 | 1 | ● |
| 3.01 ~ 3.49 | — |
6 |
10.5 |
45 |
1 | □ |
| 3.5 | — |
6 |
10.5 |
45 |
1 | ● |
| 3.51 ~ 3.99 | — |
6 |
12 |
50 |
1 | □ |
| 4 | — |
6 |
12 |
50 |
1 | ● |
| 4.01 ~ 4.49 | — |
6 |
13.5 |
50 |
1 | □ |
| 4.5 | — |
6 |
13.5 |
50 |
1 | ● |
| 4.51 ~ 4.99 | — |
6 |
15 |
55 |
1 | □ |
| 5 | — |
6 |
15 |
55 |
1 | ● |
| 5.01 ~ 5.49 | — |
6 |
16.5 |
55 |
1 | □ |
| 5.5 | — |
6 |
16.5 |
55 |
1 | ● |
| 5.51 ~ 5.99 | — |
6 |
18 |
60 |
1 | □ |
| 6 | — |
6 |
18 |
60 |
2 | ● |
| 7 | — |
8 |
21 |
65 |
1 | ● |
| 7.01 ~ 7.99 | — |
8 |
24 |
70 |
1 | □ |
| 8 | — |
8 |
24 |
70 |
2 | ● |
| 9 | — |
10 |
27 |
75 |
1 | ● |
| 9.01 ~ 9.99 | — |
10 |
30 |
80 |
1 | □ |
| 10 | — |
10 |
30 |
80 |
2 | ● |
| 11.01 ~ 11.99 | — |
12 |
36 |
85 |
1 | □ |
| 12 | — |
12 |
36 |
85 |
2 | ● |
| 14 | — |
12 |
42 |
95 |
3 | ● |
| 15.51 ~ 15.99 | — |
16 |
48 |
110 |
1 | □ |
| 16 | — |
16 |
48 |
110 |
2 | ● |
| 19.51 ~ 19.99 | — |
20 |
60 |
130 |
1 | □ |
| 20 | — |
20 |
60 |
130 |
2 | ● |
[ ! ] Manufactured products have a blade diameter designated in 0.01 mm increments.
[ ! ] For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Quadratisch |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
- 0.2
- 0.3
- 0.4
- 0.5
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 1.95
- 2
- 2.39
- 2.44
- 2.45
- 2.5
- 2.8
- 2.85
- 2.95
- 3
- 3.04
- 3.07
- 3.08
- 3.2
- 3.3
- 3.42
- 3.44
- 3.47
- 3.48
- 3.5
- 3.6
- 3.64
- 3.65
- 3.75
- 3.8
- 3.84
- 3.9
- 3.95
- 4
- 4.02
- 4.03
- 4.05
- 4.1
- 4.15
- 4.17
- 4.18
- 4.5
- 4.65
- 4.7
- 4.95
- 4.97
- 4.99
- 5
- 5.05
- 5.07
- 5.12
- 5.3
- 5.45
- 5.5
- 5.8
- 5.9
- 6
- 7
- 7.35
- 7.7
- 7.8
- 7.9
- 7.96
- 8
- 9
- 9.5
- 9.8
- 10
- 11.8
- 12
- 14
- 15.6
- 15.7
- 15.74
- 15.98
- 15.99
- 16
- 20
-
Flute Length (ℓ)(mm)
- 0.6
- 0.9
- 1.2
- 1.5
- 1.8
- 2.1
- 2.4
- 2.7
- 3
- 3.3
- 3.6
- 3.9
- 4.2
- 4.5
- 4.8
- 5.1
- 5.4
- 5.7
- 6
- 7.5
- 8.4
- 9
- 10.5
- 12
- 13.5
- 15
- 16.5
- 18
- 21
- 24
- 27
- 30
- 36
- 42
- 48
- 60
[5-60/1mmTeile]
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Nut
- Inclined Cutting
- Countersunk
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-EM2R
- SN-TSC-PEM2R
- SNR-TSC-EM2R
- SNR-TSC-PEM2R
- TSC-EM2R
- TSC-PEM2R
-
Geometry
- Sharp Corner
- Mit Führung
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
- 13 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.