TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Demonstriert hohe Leistung bei der Bearbeitung von allgemeinem Stahl, EN 1.4301 Equiv. (gesintert) und wärmebehandeltem Stahl (bis zu 50 HRC)
-Die 4D-Nutenlänge unterstützt das Fräsen von tiefen Kavitäten
-Optimal für die Bearbeitung im niedrigen bis mittleren Rotationsbereich aufgrund des universellen 30°-Spiralwinkels
-Die Beschichtung hat eine hohe Oxidationsbeständigkeit und hohe Härte und erreicht eine lange Lebensdauer. Effektiv bei Hochgeschwindigkeitsbearbeitung und Trockenbearbeitung als Beschichtungseigenschaften
-Kann nachgeschliffen werden. Bitte beachten Sie die Seite "Nachschleifservice" für Anwendungsprozeduren, Leistungsspektrum, Preise, etc.
- TS
- General Steel
- 2 Flutes
- L (Long)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer | Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 Arbeitstage | 6 | 24 | 6 | 60 | 29 ～ 42 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Mit Führung | Standard Neck Relief | 2 | □ | ||
| 1 | 8 Arbeitstage | 8 | 32 | 8 | 100 | 37 ～ 76 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Mit Führung | Standard Neck Relief | 2 | □ | ||
| 1 | 8 Arbeitstage | 10 | 40 | 10 | 100 | 45 ～ 70 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Mit Führung | Standard Neck Relief | 2 | □ | ||
| 1 | 8 Arbeitstage | 12 | 48 | 12 | 100 | 53 ～ 70 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Mit Führung | Standard Neck Relief | 2 | □ | ||
| 1 | 8 Arbeitstage | 6 | 24 | 6 | 60 | 29 ～ 42 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
| 1 | 8 Arbeitstage | 8 | 32 | 8 | 100 | 37 ～ 76 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
| 1 | 8 Arbeitstage | 10 | 40 | 10 | 100 | 45 ～ 70 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
| 1 | 8 Arbeitstage | 12 | 48 | 12 | 100 | 53 ～ 70 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
| 1 | 7 Arbeitstage | 6 | 24 | 6 | 60 | 29 ～ 42 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Mit Führung | Cutting Edge R Processing | 2 | □ | ||
| 1 | 7 Arbeitstage | 8 | 32 | 8 | 100 | 37 ～ 76 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Mit Führung | Cutting Edge R Processing | 2 | □ | ||
| 1 | 7 Arbeitstage | 10 | 40 | 10 | 100 | 45 ～ 70 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Mit Führung | Cutting Edge R Processing | 2 | □ | ||
| 1 | 7 Arbeitstage | 12 | 48 | 12 | 100 | 53 ～ 70 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Mit Führung | Cutting Edge R Processing | 2 | □ | ||
| 1 | 7 Arbeitstage | 6 | 24 | 6 | 60 | 29 ～ 42 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
| 1 | 7 Arbeitstage | 8 | 32 | 8 | 100 | 37 ～ 76 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
| 1 | 7 Arbeitstage | 10 | 40 | 10 | 100 | 45 ～ 70 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
| 1 | 7 Arbeitstage | 12 | 48 | 12 | 100 | 53 ～ 70 | Flat Surface / Side Surface / Nut / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ |
Loading...
Spezifikationen
Model Number
TSC-EM2L (Standard)
| Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| 1 | 4 | 45 | 4 | 1 | ● |
| 1.5 | 6 | 45 | 4 | 1 | ● |
| 2 | 8 | 45 | 4 | 1 | ● |
| 2.5 | 10 | 45 | 4 | 1 | ● |
| 3 | 12 | 50 | 6 | 1 | ● |
| 3.01 ~ 3.49 | 14 | 50 | 6 | 1 | □ |
| 3.5 | 14 | 50 | 6 | 1 | ● |
| 3.51 ~ 3.99 | 16 | 60 | 6 | 1 | □ |
| 4 | 16 | 60 | 6 | 1 | ● |
| 4.01 ~ 4.49 | 18 | 60 | 6 | 1 | □ |
| 4.5 | 18 | 60 | 6 | 1 | ● |
| 4.51 ~ 4.99 |
20 |
60 |
6 |
1 | □ |
| 5 |
20 |
60 |
6 |
1 | ● |
| 5.01 ~ 5.49 |
22 |
60 |
6 |
1 | □ |
| 5.5 |
22 |
60 |
6 |
1 | ● |
| 5.51 ~ 5.99 |
24 |
60 |
6 |
1 | □ |
| 6 |
24 |
60 |
6 |
2 | ● |
| 7.51 ~ 7.99 |
32 |
100 |
8 |
1 | □ |
| 8 |
32 |
100 |
8 |
2 | ● |
| 9.51 ~ 9.99 |
40 |
100 |
10 |
1 | □ |
| 10 |
40 |
100 |
10 |
2 | ● |
| 11.51 ~ 11.99 |
48 |
100 |
12 |
1 | □ |
| 12 |
48 |
100 |
12 |
2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
TSC-PEM2L (Sharp Edge)
| Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| 1 | 4 | 45 | 4 | 1 | ● |
| 1.5 | 6 | 45 | 4 | 1 | ● |
| 2 | 8 | 45 | 4 | 1 | ● |
| 2.5 | 10 | 45 | 4 | 1 | ● |
| 3 | 12 | 50 | 6 | 1 | ● |
| 3.01 ~ 3.49 | 14 | 50 | 6 | 1 | □ |
| 3.5 | 14 | 50 | 6 | 1 | ● |
| 3.51 ~ 3.99 | 16 | 60 | 6 | 1 | □ |
| 4 | 16 | 60 | 6 | 1 | ● |
| 4.01 ~ 4.49 | 18 | 60 | 6 | 1 | □ |
| 4.5 | 18 | 60 | 6 | 1 | ● |
| 4.51 ~ 4.99 |
20 |
60 |
6 |
1 | □ |
| 5 |
20 |
60 |
6 |
1 | ● |
| 5.01 ~ 5.49 |
22 |
60 |
6 |
1 | □ |
| 5.5 |
22 |
60 |
6 |
1 | ● |
| 5.51 ~ 5.99 |
24 |
60 |
6 |
1 | □ |
| 6 |
24 |
60 |
6 |
2 | ● |
| 7.51 ~ 7.99 |
32 |
100 |
8 |
1 | □ |
| 8 |
32 |
100 |
8 |
2 | ● |
| 9.51 ~ 9.99 |
40 |
100 |
10 |
1 | □ |
| 10 |
40 |
100 |
10 |
2 | ● |
| 11.51 ~ 11.99 |
48 |
100 |
12 |
1 | □ |
| 12 |
48 |
100 |
12 |
2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Quadratisch |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Geometry
- Sharp Corner
- Mit Führung
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-EM2L
- SN-TSC-PEM2L
- SNR-TSC-EM2L
- SNR-TSC-PEM2L
- TSC-EM2L
- TSC-PEM2L
-
Processing Applications
- Flat Surface
- Side Surface
- Nut
- Inclined Cutting
- Countersunk
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
- 13 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.