Hersteller-Teilenummer: SEC-EM2S7.29
Marke: MISUMI
Preis: 53.70 €
Lieferzeit: 7 Arbeitstage
Outer Diameter (D): 7.29 φ
Flute Length (ℓ): 16 mm
Shank Diameter (d): 8 mm
Overall Length (L): 55 mm
Length Under Neck (ℓ1): - mm
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
SEC-EM2S7.29
Teilenummer
|
---|
SEC-EM2S7.29 |
Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53.70 € | 1 | Verfügbar | 7 Arbeitstage | 7.29 | 16 | 8 | 55 | - | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | Manufactured Product | 1 | □ |
Loading...
Model Number
SEC-EM2S (Standard) / SEC-PEM2S (Sharp Edge)
Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
0.2 | 0.4 | 35 | 3 | 1 | ● |
0.4 | 0.8 | 35 | 3 | 1 | ● |
0.5 | 1 | 35 | 3 | 1 | ● |
0.8 | 1.6 | 35 | 3 | 1 | ● |
1 | 2 | 40 | 4 | 1 | ● |
1.2 | 2.4 | 40 | 4 | 1 | ● |
1.5 | 3 | 40 | 4 | 1 | ● |
1.8 | 3.6 | 40 | 4 | 1 | ● |
1.91 ~ 1.99 | 4 | 40 | 4 | 1 | □ (Standard Only) |
2 | 4 | 40 | 4 | 1 | ● |
2.25 ~ 2.49 | 5 | 40 | 4 | 1 | □ (Standard Only) |
2.5 | 5 | 40 | 4 | 1 | ● |
2.81 ~ 2.99 | 6 | 45 | 6 | 1 | □ (Standard Only) |
3 | 6 | 45 | 6 | 1 | ● |
3.01 ~ 3.49 | 7 | 45 | 6 | 1 | □ |
3.5 | 7 | 45 | 6 | 1 | ● |
3.51 ~ 3.99 | 8 | 45 | 6 | 1 | □ |
4 | 8 | 45 | 6 | 1 | ● |
4.51 ~ 4.99 | 10 | 45 | 6 | 1 | □ |
5 | 10 | 45 | 6 | 1 | ● |
5.51 ~ 5.99 | 12 | 45 | 6 | 1 | □ |
6 | 12 | 45 | 6 | 2 | ● |
7.01 ~ 7.99 | 16 | 55 | 8 | 1 | □ |
8 | 16 | 55 | 8 | 2 | ● |
9.01 ~ 9.99 | 20 | 65 | 10 | 1 | □ |
10 | 20 | 65 | 10 | 2 | ● |
11.01 ~ 11.99 | 24 | 75 | 12 | 1 | □ |
12 | 24 | 75 | 12 | 2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
● A general-purpose 2-flute end mill for a wide range of applications.
● Delivers a finish with very good working surface roughness after machining.
Work Material | General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Quadratisch |
---|---|---|---|---|---|
Coating | Ohne Beschichtung | Torsion Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
Sie befinden sich auf der Seite für Carbide square end mill, 2-flute / 2D Flute Length (short) model, die Teilenummer ist SEC-EM2S7.29.
Sie finden detaillierte Informationen über Spezifikation und Dimensionierung unter der Teilenummer SEC-EM2S7.29.
Konfigurieren
Basiseigenschaften
Length Under Neck (ℓ1)(mm)
Processing Applications
Ausführung
Outer Diameter (D)(φ)
Flute Length (ℓ)(mm)
Shank Diameter (d)(mm)
Overall Length (L)(mm)
Geometry
Additional Classification
Filtern nach vsl. Lieferzeit
Optionale Eigenschaften
Teilenummer |
---|
SEC-EM2S0.8 |
SEC-EM2S1 |
SEC-EM2S1.2 |
SEC-EM2S7.30 |
SEC-EM2S7.31 |
SEC-EM2S7.32 |
Teilenummer | Standard-Stückpreis | Mindestbestellmenge | Mengenrabatt | Reguläre Versanddauer ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
22.87 € | 1 | Verfügbar | 5 Arbeitstage | 0.8 | 1.6 | 3 | 35 | - | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Stocked Product | 1 | ● | |
14.36 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 2 | 4 | 40 | - | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Stocked Product | 1 | ● | |
23.54 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 2.4 | 4 | 40 | - | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Stocked Product | 1 | ● | |
53.70 € | 1 | Verfügbar | 7 Arbeitstage | 7.3 | 16 | 8 | 55 | - | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Manufactured Product | 1 | □ | |
53.70 € | 1 | Verfügbar | 7 Arbeitstage | 7.31 | 16 | 8 | 55 | - | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Manufactured Product | 1 | □ | |
53.70 € | 1 | Verfügbar | 7 Arbeitstage | 7.32 | 16 | 8 | 55 | - | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Manufactured Product | 1 | □ |