• Marken
  • Unternehmen
  • Kontakt
DE
TYPENCODE Suche | *NOT READY*
#CODE
Suchwort-Vorschlag
Vorgeschlagene Teilenummer
Auslaufprodukte

TSC series carbide long neck square end mill, 4-flute / long neck model (Teilenummern)

TSC series carbide long neck square end mill, 4-flute / long neck model

Klicken Sie auf dieses Bild, um es zu vergrößern.

Klicken Sie auf dieses Bild, um es zu vergrößern.

  • TSC series carbide long neck square end mill, 4-flute / long neck model
  • TSC series carbide long neck square end mill, 4-flute / long neck model
  • Mengenrabatt

MISUMI

MISUMI

[Merkmale]
-Demonstriert hohe Leistung bei der Bearbeitung von allgemeinem Stahl, EN 1.4301 Equiv. (gesintert) und wärmebehandeltem Stahl (bis zu 50 HRC)
-Kann die optimale Körperlänge für die Bearbeitung tiefer Teile des Werkstücks auswählen
-Optimal für die Bearbeitung im niedrigen bis mittleren Drehbereich aufgrund des universellen 30°-Spiralwinkels
-Ist mit einer Beschichtung mit hoher Oxidationsbeständigkeit und hoher Härte ausgestattet und erreicht eine lange Lebensdauer. Effektiv bei Hochgeschwindigkeitsbearbeitung und Trockenbearbeitung als Beschichtungseigenschaften
  • TS
  • General Steel
  • 4 Flutes

Teilenummer

Hier finden Sie die Teilenummern
zu dem gesuchten Artikel

TSC series carbide long neck square end mill, 4-flute / long neck model:Related Image

Daten, die angezeigt werden sollen
30
45
60
  1. << Zurück
  2. 1
  3. 2
  4. 3
Teilenummer
TSC-PEM4LB3-12
TSC-PEM4LB3-16
TSC-PEM4LB3-20
TSC-PEM4LB3-25
TSC-PEM4LB3-30
TSC-PEM4LB3-40
TSC-PEM4LB3.5-16
TSC-PEM4LB3.5-25
TSC-PEM4LB3.5-35
TSC-PEM4LB4-12
TSC-PEM4LB4-16
TSC-PEM4LB4-20
TSC-PEM4LB4-30
TSC-PEM4LB4-35
TSC-PEM4LB4-40
TSC-PEM4LB4-45
TSC-PEM4LB4-50
TSC-PEM4LB5-16
TSC-PEM4LB5-25
TSC-PEM4LB5-35
TSC-PEM4LB5-50
TSC-PEM4LB6-20
TSC-PEM4LB6-30
TSC-PEM4LB6-40
TSC-PEM4LB6-50
Teilenummer
Standard-Stückpreis
MindestbestellmengeMengenrabatt
Reguläre
Versanddauer
?
Outer Diameter (D)
(φ) 		Flute Length (ℓ)
(mm) 		Shank Diameter (d)
(mm) 		Overall Length (L)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Geometry Torsion Angle (θ) Additional Classification Figure ● Inventory Product □ Manufacturer Product Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm)

28.89 €

1 Verfügbar 5 Arbeitstage 34.565012Sharp CornerStandard Helix (30 to 40°)Stocked Product1●2.912.5713.1914.6516.48

30.07 €

1 Verfügbar 5 Arbeitstage 34.567016Sharp CornerStandard Helix (30 to 40°)Stocked Product1●2.916.7517.5819.5321.97

30.07 €

1 Verfügbar 5 Arbeitstage 34.567020Sharp CornerStandard Helix (30 to 40°)Stocked Product1●2.920.9421.9824.4127.46

29.81 €

1 Verfügbar 5 Arbeitstage 34.567025Sharp CornerStandard Helix (30 to 40°)Stocked Product1●2.926.1827.4730.51Without Interference

37.58 €

1 Verfügbar 5 Arbeitstage 34.567030Sharp CornerStandard Helix (30 to 40°)Stocked Product1●2.931.4132.9736.62Without Interference

50.62 €

1 Verfügbar 5 Arbeitstage 34.5610040Sharp CornerStandard Helix (30 to 40°)Stocked Product1●2.941.8843.96Without InterferenceWithout Interference

43.33 €

1 Verfügbar 5 Arbeitstage 3.55.567016Sharp CornerStandard Helix (30 to 40°)Stocked Product1●3.3516.7517.5819.5321.97

32.54 €

1 Verfügbar 5 Arbeitstage 3.55.567025Sharp CornerStandard Helix (30 to 40°)Stocked Product1●3.3526.1827.4730.51Without Interference

43.99 €

1 Verfügbar 5 Arbeitstage 3.55.5610035Sharp CornerStandard Helix (30 to 40°)Stocked Product1●3.3536.6538.46Without InterferenceWithout Interference

34.81 €

1 Verfügbar 5 Arbeitstage 4665012Sharp CornerStandard Helix (30 to 40°)Stocked Product1●3.812.5713.1914.6516.48

34.34 €

1 Verfügbar 5 Arbeitstage 4665016Sharp CornerStandard Helix (30 to 40°)Stocked Product1●3.816.7517.5819.53Without Interference

34.27 €

1 Verfügbar 5 Arbeitstage 4667020Sharp CornerStandard Helix (30 to 40°)Stocked Product1●3.820.9421.9824.41Without Interference

34.00 €

1 Verfügbar 5 Arbeitstage 4667030Sharp CornerStandard Helix (30 to 40°)Stocked Product1●3.831.4132.97Without InterferenceWithout Interference

34.60 €

1 Verfügbar 5 Arbeitstage 46610035Sharp CornerStandard Helix (30 to 40°)Stocked Product1●3.836.6538.46Without InterferenceWithout Interference

48.54 €

1 Verfügbar 5 Arbeitstage 46610040Sharp CornerStandard Helix (30 to 40°)Stocked Product1●3.841.8843.96Without InterferenceWithout Interference

57.92 €

1 Verfügbar 5 Arbeitstage 46610045Sharp CornerStandard Helix (30 to 40°)Stocked Product1●3.847.1249.45Without InterferenceWithout Interference

69.59 €

1 Verfügbar 5 Arbeitstage 46610050Sharp CornerStandard Helix (30 to 40°)Stocked Product1●3.852.3554.95Without InterferenceWithout Interference

57.30 €

1 Verfügbar 5 Arbeitstage 57.567016Sharp CornerStandard Helix (30 to 40°)Stocked Product1●4.816.7517.58Without InterferenceWithout Interference

42.20 €

1 Verfügbar 5 Arbeitstage 57.567025Sharp CornerStandard Helix (30 to 40°)Stocked Product1●4.826.1827.47Without InterferenceWithout Interference

44.73 €

1 Verfügbar 5 Arbeitstage 57.5610035Sharp CornerStandard Helix (30 to 40°)Stocked Product1●4.836.65Without InterferenceWithout InterferenceWithout Interference

86.14 €

1 Verfügbar 5 Arbeitstage 57.5610050Sharp CornerStandard Helix (30 to 40°)Stocked Product1●4.852.35Without InterferenceWithout InterferenceWithout Interference

56.61 €

1 Verfügbar 5 Arbeitstage 6967020Sharp CornerStandard Helix (30 to 40°)Stocked Product2●5.8Without InterferenceWithout InterferenceWithout InterferenceWithout Interference

41.50 €

1 Verfügbar 5 Arbeitstage 6967030Sharp CornerStandard Helix (30 to 40°)Stocked Product2●5.8Without InterferenceWithout InterferenceWithout InterferenceWithout Interference

47.50 €

1 Verfügbar 5 Arbeitstage 69610040Sharp CornerStandard Helix (30 to 40°)Stocked Product2●5.8Without InterferenceWithout InterferenceWithout InterferenceWithout Interference

81.34 €

1 Verfügbar 5 Arbeitstage 69610050Sharp CornerStandard Helix (30 to 40°)Stocked Product2●5.8Without InterferenceWithout InterferenceWithout InterferenceWithout Interference

Loading...

  1. << Zurück
  2. 1
  3. 2
  4. 3

Spezifikationen

TSC series carbide long neck square end mill, 4-flute / long neck model:Related Image
Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
1 4 ● ● 1.5 0.95 50 4 4.19 4.40 4.88 5.49 1
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
1.2 6 ● ● 1.8 1.15 50 4 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
16 ● ● 16.75 17.58 19.53 21.97
1.3 6 No Standards ● 1.9 1.25 50 4 6.28 6.59 7.32 8.24 1
10 No Standards ● 10.47 10.99 12.21 13.73
1.4 6 No Standards ● 2.1 1.35 50 4 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
14 No Standards ● 14.66 15.39 17.09 19.22


Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
1.5 6 ● ● 2.3 1.45 50 4 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 21.97
18 ● ● 70 18.85 19.78 21.97 24.71
20 ● ● 20.94 21.98 24.41 Without Interference
1.6 6 No Standards ● 2.4 1.55 50 4 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
1.7 6 No Standards ● 2.5 1.65 50 4 6.28 6.59 7.32 8.24 1
16 No Standards ● 16.75 17.58 19.53 21.97
1.8 6 No Standards ● 2.7 1.75 50 4 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 Without Interference
20 No Standards ● 70 20.94 21.98 24.41 Without Interference
25 No Standards ● 26.18 27.47 30.51 Without Interference
2 6 ● ● 3 1.95 50 4 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 Without Interference
18 ● ● 70 18.85 19.78 21.97 Without Interference
20 ● ● 20.94 21.98 24.41 Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
2.5 8 ● ● 3.8 2.4 50 4 8.38 8.79 9.76 10.98 1
12 ● ● 12.57 13.19 14.65 Without Interference
16 ● ● 16.75 17.58 19.53 Without Interference
20 ● ● 70 20.94 21.98 Without Interference Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference


Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
3 8 No Standards ● 4.5 2.9 50 6 8.38 8.79 9.76 10.98 1
12 ● ● 12.57 13.19 14.65 16.48
16 ● ● 70 16.75 17.58 19.53 21.97
20 ● ● 20.94 21.98 24.41 27.46
25 ● ● 26.18 27.47 30.51 Without Interference
30 ● ● 31.41 32.97 36.62 Without Interference
40 ● ● 100 41.88 43.96 Without Interference Without Interference
3.5 16 No Standards ● 5.5 3.35 70 6 16.75 17.58 19.53 21.97 1
25 No Standards ● 26.18 27.47 30.51 Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
4 12 No Standards ● 6 3.8 50 6 12.57 13.19 14.65 16.48 1
16 ● ● 16.75 17.58 19.53 Without Interference
20 ● ● 70 20.94 21.98 24.41 Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
40 ● ● 41.88 43.96 Without Interference Without Interference
45 No Standards ● 47.12 49.45 Without Interference Without Interference
50 No Standards ● 52.35 54.95 Without Interference Without Interference
5 16 ● ● 7.5 4.8 70 6 16.75 17.58 Without Interference Without Interference 1
25 ● ● 26.18 27.47 Without Interference Without Interference
35 ● ● 100 36.65 Without Interference Without Interference Without Interference
50 ● ● 52.35 Without Interference Without Interference Without Interference
6 20 ● ● 9 5.8 70 6 Without Interference Without Interference Without Interference Without Interference 2
30 ● ● Without Interference Without Interference Without Interference Without Interference
40 ● ● 100 Without Interference Without Interference Without Interference Without Interference
50 ● ● Without Interference Without Interference Without Interference Without Interference


Model Number
LN-TSC-PEM4S (Sharp Edge / Manufactured Product) / EM4S (Standard / Manufactured Product)

Outer Diameter
D		 Length Under Neck ℓ1
1 mm Increment Designation		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Figure
1.5 8 ~ 20 ● ● 3 1.45 40 4 3
2 9 ~ 21 ● ● 4 1.95 40 4 3
2.5 10 ~ 22 ● ● 5 2.4 40 4 3
3 11 ~ 21 ● ● 6 2.9 45 6 3
3.5 12 ~ 22 ● ● 7 3.3 45 6 3
4 13 ~ 23 ● ● 8 3.8 45 6 3
5 15 ~ 25 ● ● 10 4.8 45 6 3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
For Cutting Conditions, Refer to >>Click here.

Weitere Informationen


● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.


TSC series carbide long neck square end mill, 4-flute / long neck model:Related Image

Grundlegende Informationen

Work Material General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 4 Model Long Neck Square
Coating For High Hardness (Silicone-Based) Processing Applications Flat Surface / Side Surface / Inclined Cutting Tolerance of OD(mm) 0 ~ -0.02

Konfigurieren

Zurücksetzen

145Vorgeschlagene Teilenummer

Teilenummern anzeigen

Einige Spezifikationen sind bisher nicht festgelegt.
Die Teilenummer wurde erkannt.

Basiseigenschaften

  • Outer Diameter (D)(φ)

    • 1
    • 1.2
    • 1.3
    • 1.4
    • 1.5
    • 1.6
    • 1.7
    • 1.8
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 5
    • 6

    Zurücksetzen

  • Flute Length (ℓ)(mm)

    • 1.5
    • 1.8
    • 1.9
    • 2.1
    • 2.3
    • 2.4
    • 2.5
    • 2.7
    • 3
    • 3.8
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 7
    • 7.5
    • 8
    • 9
    • 10

    Zurücksetzen

  • Shank Diameter (d)(mm)

    • 4
    • 6

    Zurücksetzen

  • Overall Length (L)(mm)

    • 40
    • 45
    • 50
    • 70
    • 100

    Zurücksetzen

  • Length Under Neck (ℓ1)(mm)

    • 4
    • 6
    • 8
    • 10
    • 12
    • 14
    • 16
    • 18
    • 20
    • 25
    • 30
    • 35
    • 40
    • 45
    • 50

     [8-25/1mmTeile]

    Zurücksetzen

  • Geometry

    • Sharp Corner
    • Mit Führung

    Zurücksetzen

  • Torsion Angle (θ)

    • Standard Helix (30 to 40°)
    • Powerful Helix (45° to 60°)

    Zurücksetzen

  • Additional Classification

    • Manufactured Product
    • Stocked Product

    Zurücksetzen

  • Ausführung

    • LN-TSC-EM4S
    • LN-TSC-PEM4S
    • TSC-EM4LB
    • TSC-PEM4LB

    Zurücksetzen

Filtern nach vsl. Lieferzeit

    • Alle Produkte
    • 5 Tage oder weniger
    • 8 Tage oder weniger

    Zurücksetzen

Optionale Eigenschaften

Technischer Support

Technische Anfrage

Bezahlverfahren

  • Rechnung
  • Vorauskasse
  • PayPal

On-Demand-Fertigung

Ansicht ändern

Zertifikate

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI weltweit

Social Media

Rechtliche Hinweise

Copyright © MISUMI Corporation All Rights Reserved.