TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
Bei der Bearbeitung von Rohmaterial, wärmebehandeltem Stahl, Aluminium usw., bei der Fertigstellung von Stehwänden für den Formboden (Hauptform) usw. zeigen sie ihre Stärke dank des positiven Spanwinkels, der scharfen Ecken der Unterkante und des starken Schrägungswinkels von 53°
-Hohe Werkzeugsteifigkeit minimiert die Werkzeugneigung beim Seitenfräsen
- TS
- General Steel
- Multi-Flutes （5 ~）
- S (Short)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Arbeitstage | 6 | 12 | 6 | 6 | 60 | 17 ～ 42 | Flat Surface / Side Surface | Standard Neck Relief | -0.020 ~ -0.038 | 2 | □ | ||
- | 1 | 8 Arbeitstage | 8 | 16 | 6 | 8 | 75 | 21 ～ 51 | Flat Surface / Side Surface | Standard Neck Relief | -0.025 ~ -0.045 | 2 | □ | ||
- | 1 | 8 Arbeitstage | 10 | 20 | 6 | 10 | 80 | 25 ～ 50 | Flat Surface / Side Surface | Standard Neck Relief | -0.025 ~ -0.045 | 2 | □ | ||
- | 1 | 8 Arbeitstage | 12 | 24 | 6 | 12 | 100 | 29 ～ 70 | Flat Surface / Side Surface | Standard Neck Relief | -0.032 ~ -0.059 | 2 | □ | ||
- | 1 | 7 Arbeitstage | 6 | 12 | 6 | 6 | 60 | 17 ～ 42 | Flat Surface / Side Surface | Cutting Edge R Processing | -0.020 ~ -0.038 | 2 | □ | ||
- | 1 | 7 Arbeitstage | 8 | 16 | 6 | 8 | 75 | 21 ～ 51 | Flat Surface / Side Surface | Cutting Edge R Processing | -0.025 ~ -0.045 | 2 | □ | ||
- | 1 | 7 Arbeitstage | 10 | 20 | 6 | 10 | 80 | 25 ～ 50 | Flat Surface / Side Surface | Cutting Edge R Processing | -0.025 ~ -0.045 | 2 | □ | ||
- | 1 | 7 Arbeitstage | 12 | 24 | 6 | 12 | 100 | 29 ～ 70 | Flat Surface / Side Surface | Cutting Edge R Processing | -0.032 ~ -0.059 | 2 | □ | ||
61.92 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 2 | 4 | 6 | 60 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.014 ~ -0.028 | 1 | ● | |
51.66 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 4 | 4 | 6 | 60 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.014 ~ -0.028 | 1 | ● | |
55.56 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 6 | 4 | 6 | 60 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.014 ~ -0.028 | 1 | ● | |
81.41 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 8 | 4 | 6 | 60 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.020 ~ -0.038 | 1 | ● | |
89.40 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 10 | 4 | 6 | 60 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.020 ~ -0.038 | 1 | ● | |
87.20 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 12 | 6 | 6 | 60 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.020 ~ -0.038 | 2 | ● | |
101.80 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 16 | 6 | 8 | 75 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.025 ~ -0.045 | 2 | ● | |
111.02 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 20 | 6 | 10 | 80 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.025 ~ -0.045 | 2 | ● | |
136.33 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 24 | 6 | 12 | 100 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.032 ~ -0.059 | 2 | ● |
Loading...
Spezifikationen
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Number of Flutes | Figure | |
| Outer Diameter D |
||||||
| TSC-PSXS | 1 | 2 | 60 | 6 | 4 | 1 |
| 2 | 4 | 60 | 6 | 4 | 1 | |
| 3 | 6 | 60 | 6 | 4 | 1 | |
| 4 | 8 | 60 | 6 | 4 | 1 | |
| 5 | 10 | 60 | 6 | 4 | 1 | |
| 6 | 12 | 60 | 6 | 6 | 2 | |
| 8 | 16 | 75 | 8 | 6 | 2 | |
| 10 | 20 | 80 | 10 | 6 | 2 | |
| 12 | 24 | 100 | 12 | 6 | 2 |
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● The positive finish of the rake angle, sharp edge processing of the bottom blade corners and 53° strong twist deliver strength when finishing pocket vertical wall surfaces of mold bases (holding blocks), and when machining raw materials, heat-treated steel and aluminum.
● The TS film coating with much greater oxidation resistance and hardness than conventional films exhibits excellent durability, even with raw carbon steel materials, in addition to heat-treated steel.
● The tool has a high rigidity, reducing the chances of tool breakage to a minimum when cutting side surfaces.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Model | Highly-Helical | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Geometry | Sharp Corner | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Inclined Cutting
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-PSXS
- SNR-TSC-PSXS
- TSC-PSXS
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.