TSC series carbide radius end mill, 3-flute, 45° spiral / short model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Durch die 3-Schneidenform ist er resistent gegen Rattern und kann stufenlos vom Einstechen zum Nutenfräsen übergehen
-Einzigartige Spankanalform ermöglicht Nutenfräsen mit einer Schnitttiefe, die der von 2 Schneiden entspricht
-Vergleichbar mit 30° Schrägungswinkel-Vierkantfräsern sind sowohl Rotation als auch Vorschub mehr als doppelt so schnell
-Kann nachgeschliffen werden. Bitte informieren Sie sich auf der Seite "Nachschleifservice" über Einsatzverfahren, Leistungsspektrum, Preise, etc.
- TS
- General Steel
- 3 Flutes
- S (Short)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Arbeitstage | 6 | 0.3 | 13 | 60 | 6 | 18 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 0.5 | 13 | 60 | 6 | 18 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 1 | 13 | 60 | 6 | 18 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 1.5 | 13 | 60 | 6 | 18 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.3 | 19 | 75 | 8 | 24 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.5 | 19 | 75 | 8 | 24 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1 | 19 | 75 | 8 | 24 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1.5 | 19 | 75 | 8 | 24 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 0.3 | 22 | 80 | 10 | 27 ～ 50 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 0.5 | 22 | 80 | 10 | 27 ～ 50 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1 | 22 | 80 | 10 | 27 ～ 50 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1.5 | 22 | 80 | 10 | 27 ～ 50 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 2 | 22 | 80 | 10 | 27 ～ 50 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 0.3 | 26 | 100 | 12 | 31 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 0.5 | 26 | 100 | 12 | 31 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1 | 26 | 100 | 12 | 31 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1.5 | 26 | 100 | 12 | 31 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 2 | 26 | 100 | 12 | 31 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.3 | 5 ～ 13 | 60 | 6 | 18 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.5 | 5 ～ 13 | 60 | 6 | 18 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 1 | 5 ～ 13 | 60 | 6 | 18 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 1.5 | 5 ～ 13 | 60 | 6 | 18 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.3 | 5 ～ 19 | 75 | 8 | 24 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.5 | 5 ～ 19 | 75 | 8 | 24 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1 | 5 ～ 19 | 75 | 8 | 24 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1.5 | 5 ～ 19 | 75 | 8 | 24 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 0.3 | 5 ～ 22 | 80 | 10 | 27 ～ 50 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 0.5 | 5 ～ 22 | 80 | 10 | 27 ～ 50 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1 | 5 ～ 22 | 80 | 10 | 27 ～ 50 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1.5 | 5 ～ 22 | 80 | 10 | 27 ～ 50 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 2 | 5 ～ 22 | 80 | 10 | 27 ～ 50 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 0.3 | 5 ～ 26 | 100 | 12 | 31 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 0.5 | 5 ～ 26 | 100 | 12 | 31 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1 | 5 ～ 26 | 100 | 12 | 31 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1.5 | 5 ～ 26 | 100 | 12 | 31 ～ 70 | Cutting Edge R Processing | 2 | ||
112.22 € | 1 | Verfügbar | 7 Arbeitstage | 12 | 2 | - | 100 | 12 | - | Cutting Edge R Processing | 2 | |
68.47 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.3 | 8 | 60 | 6 | - | Stocked Product | 1 | |
41.41 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.5 | 8 | 60 | 6 | - | Stocked Product | 1 | |
59.15 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.3 | 11 | 60 | 6 | - | Stocked Product | 1 | |
48.27 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.5 | 11 | 60 | 6 | - | Stocked Product | 1 | |
57.16 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.3 | 13 | 60 | 6 | - | Stocked Product | 1 | |
57.16 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.5 | 13 | 60 | 6 | - | Stocked Product | 1 | |
44.51 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.3 | 13 | 60 | 6 | - | Stocked Product | 2 | |
55.59 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.5 | 13 | 60 | 6 | - | Stocked Product | 2 | |
58.31 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 1 | 13 | 60 | 6 | - | Stocked Product | 2 | |
63.39 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 1.5 | 13 | 60 | 6 | - | Stocked Product | 2 | |
62.15 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 0.3 | 19 | 75 | 8 | - | Stocked Product | 2 | |
62.65 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 0.5 | 19 | 75 | 8 | - | Stocked Product | 2 | |
62.65 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 1 | 19 | 75 | 8 | - | Stocked Product | 2 | |
67.18 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 1.5 | 19 | 75 | 8 | - | Stocked Product | 2 | |
75.80 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 0.3 | 22 | 80 | 10 | - | Stocked Product | 2 | |
98.78 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 0.5 | 22 | 80 | 10 | - | Stocked Product | 2 | |
81.87 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 1 | 22 | 80 | 10 | - | Stocked Product | 2 | |
98.06 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 1.5 | 22 | 80 | 10 | - | Stocked Product | 2 | |
82.36 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 2 | 22 | 80 | 10 | - | Stocked Product | 2 | |
89.38 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 0.3 | 26 | 100 | 12 | - | Stocked Product | 2 | |
95.03 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 0.5 | 26 | 100 | 12 | - | Stocked Product | 2 | |
100.67 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 1 | 26 | 100 | 12 | - | Stocked Product | 2 | |
104.67 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 1.5 | 26 | 100 | 12 | - | Stocked Product | 2 | |
103.92 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 2 | 26 | 100 | 12 | - | Stocked Product | 2 |
Loading...
Spezifikationen
Model Number
TSC-CR-HEM3S (Stocked Product) / T-TSC-HEM3S (Manufactured Product)
| Outer Diameter D |
Radius | R Select (Stocked Product) CR 0.1 mm Increment Designation( Manufactured Product ) |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| 3 | 0.3 0.5 | 8 | 60 | 6 | 1 | ● | |
| 4 | 0.3 0.5 | 11 | 60 | 6 | 1 | ● | |
| 0.1 ~ 0.4 | □ | ||||||
| 5 | 0.3 0.5 | 13 | 60 | 6 | 1 | ● | |
| 0.1 ~ 0.4 | □ | ||||||
| 6 | 0.3 0.5 1 1.5 | 13 | 60 | 6 | 2 | ● | |
| 0.1 ~ 0.9 | □ | ||||||
| 7 | 0.1 ~ 1.0 | 16 | 70 | 8 | 1 | □ | |
| 7.5 | 0.1 ~ 1.0 | 16 | 70 | 8 | 1 | □ | |
| 8 | 0.3 0.5 1 1.5 | 19 | 75 | 8 | 2 | ● | |
| 0.1 ~ 1.4 | □ | ||||||
| 9 | 0.1 ~ 1.5 | 19 | 80 | 10 | 1 | □ | |
| 10 | 0.3 0.5 1 1.5 2 | 22 | 80 | 10 | 2 | ● | |
| 0.1 ~ 1.9 | □ | ||||||
| 11 | 0.1 ~ 2.0 | 22 | 100 | 12 | 1 | □ | |
| 12 | 0.3 0.5 1 1.5 2 | 26 | 100 | 12 | 2 | ● | |
| 0.1 ~ 2.5 | □ | ||||||
| 16 | 0.1 ~ 3.0 | 32 | 105 | 16 | 2 | □ | |
| 20 | 0.1 ~ 3.0 | 38 | 110 | 20 | 2 | □ | |
[ ! ]The flute length (ℓ) and total length (L) are approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products do not have a coating. Refer to >>Click here. for information about re-coating during additional processing.
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Has a 3-flute shape to be strong against chatter and is capable of stepless grooving.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 3 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Nut / Thrust (Z-Feed) / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| R Precision(μm) | ±0.01 |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-CR-HEM3S
- SNR-TSC-CR-HEM3S
- TSC-CR-HEM3S
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.