TSC series carbide radius end mill, 4-flute, 45°, regular model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Radius-Multifunktionsfräser
-Einzigartige Spanform ermöglicht Nutenschneiden mit einer Schnitttiefe, die der von 2 Schneiden entspricht
-Vergleichbar mit 30°-Spiralwinkel-Vierkantfräsern sind sowohl Rotation als auch Vorschub mehr als doppelt so schnell
-Radius-Schneide unterdrückt auch effektiv Ausbrüche
-Kann nachgeschliffen werden. Bitte lesen Sie auf der Seite "Nachschleifservice" nach, wie Sie den Fräser einsetzen, welche Leistungen er anbietet, wie hoch die Preise sind, usw.
- TS
- General Steel
- 4 Flutes
- R (Regular)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Arbeitstage | 6 | 0.3 | 21 | 60 | 6 | 26 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 0.5 | 21 | 60 | 6 | 26 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 1 | 21 | 60 | 6 | 26 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.3 | 26 | 75 | 8 | 31 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.5 | 26 | 75 | 8 | 31 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1 | 26 | 75 | 8 | 31 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1.5 | 26 | 75 | 8 | 26 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 2 | 26 | 75 | 8 | 31 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 0.3 | 34 | 90 | 10 | 39 ～ 60 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 0.5 | 34 | 90 | 10 | 39 ～ 60 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1 | 34 | 90 | 10 | 39 ～ 60 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1.5 | 34 | 90 | 10 | 39 ～ 60 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 2 | 34 | 90 | 10 | 39 ～ 60 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 0.3 | 38 | 100 | 12 | 43 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 0.5 | 38 | 100 | 12 | 43 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1 | 38 | 100 | 12 | 43 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1.5 | 38 | 100 | 12 | 43 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 2 | 38 | 100 | 12 | 43 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 3 | 38 | 100 | 12 | 43 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 16 | 0.5 | 48 | 110 | 16 | 58 ～ 78 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 16 | 1 | 48 | 110 | 16 | 58 ～ 78 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 16 | 2 | 48 | 110 | 16 | 58 ～ 78 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 16 | 3 | 48 | 110 | 16 | 58 ～ 78 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 20 | 0.5 | 56 | 130 | 20 | 66 ～ 92 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 20 | 1 | 56 | 130 | 20 | 66 ～ 92 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 20 | 2 | 56 | 130 | 20 | 66 ～ 92 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 20 | 3 | 56 | 130 | 20 | 66 ～ 92 | Standard Neck Relief | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.3 | 5 ～ 21 | 60 | 6 | 26 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.5 | 5 ～ 21 | 60 | 6 | 26 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 1 | 5 ～ 21 | 60 | 6 | 26 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.3 | 5 ～ 26 | 75 | 8 | 31 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.5 | 5 ～ 26 | 75 | 8 | 31 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1 | 5 ～ 26 | 75 | 8 | 31 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1.5 | 5 ～ 26 | 75 | 8 | 26 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 2 | 5 ～ 26 | 75 | 8 | 31 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 0.3 | 5 ～ 34 | 90 | 10 | 39 ～ 60 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 0.5 | 5 ～ 34 | 90 | 10 | 39 ～ 60 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1 | 5 ～ 34 | 90 | 10 | 39 ～ 60 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1.5 | 5 ～ 34 | 90 | 10 | 39 ～ 60 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 2 | 5 ～ 34 | 90 | 10 | 39 ～ 60 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 0.3 | 5 ～ 38 | 100 | 12 | 43 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 0.5 | 5 ～ 38 | 100 | 12 | 43 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1 | 5 ～ 38 | 100 | 12 | 43 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1.5 | 5 ～ 38 | 100 | 12 | 43 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 2 | 5 ～ 38 | 100 | 12 | 43 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 3 | 5 ～ 38 | 100 | 12 | 43 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 16 | 0.5 | 5 ～ 48 | 110 | 16 | 53 ～ 78 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 16 | 1 | 5 ～ 48 | 110 | 16 | 53 ～ 78 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 16 | 2 | 5 ～ 48 | 110 | 16 | 53 ～ 78 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 16 | 3 | 5 ～ 48 | 110 | 16 | 53 ～ 78 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 20 | 0.5 | 5 ～ 56 | 130 | 20 | 61 ～ 92 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 20 | 1 | 5 ～ 56 | 130 | 20 | 61 ～ 92 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 20 | 2 | 5 ～ 56 | 130 | 20 | 61 ～ 92 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 20 | 3 | 5 ～ 56 | 130 | 20 | 61 ～ 92 | Cutting Edge R Processing | 2 | ||
82.89 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.2 | 16 | 60 | 6 | - | Stocked Product | 1 | |
56.54 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.3 | 16 | 60 | 6 | - | Stocked Product | 1 | |
56.54 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.5 | 16 | 60 | 6 | - | Stocked Product | 1 | |
75.17 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.2 | 18 | 60 | 6 | - | Stocked Product | 1 | |
59.95 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.3 | 18 | 60 | 6 | - | Stocked Product | 1 | |
58.45 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.5 | 18 | 60 | 6 | - | Stocked Product | 1 |
Loading...
Spezifikationen
Model Number
TSC-CR-HEM4R (Stocked Product) / T-TSC-HEM4R (Manufactured Product)
| Outer Diameter D |
Radius R CR Select 0.1mm Increment Designation (Stocked Product) (Manufactured Product) |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
||||||
| 3 | 0.2 | 0.3 | 0.5 | 16 | 60 | 6 | 1 | ● | ||||
| 4 | 0.2 | 0.3 | 0.5 | 1 | 18 | 60 | 6 | 1 | ● | |||
| 0.1 ~ 0.4 | □ | |||||||||||
| 5 | 0.3 | 0.5 | 1 | 21 | 60 | 6 | 1 | ● | ||||
| 0.1 ~ 0.4 | □ | |||||||||||
| 6 | 0.3 | 0.5 | 1 | 21 | 60 | 6 | 2 | ● | ||||
| 0.1 ~ 0.9 | □ | |||||||||||
| 7 | 0.1 ~ 1.0 | 24 | 60 | 8 | 1 | □ | ||||||
| 7.5 | 0.1 ~ 1.0 | 24 | 60 | 8 | 1 | □ | ||||||
| 8 | 0.3 | 0.5 | 1 | 1.5 | 2 | 26 | 75 | 8 | 2 | ● | ||
| 0.1 ~ 1.4 | □ | |||||||||||
| 10 | 0.3 | 0.5 | 1 | 1.5 | 2 | 34 | 90 | 10 | 2 | ● | ||
| 0.1 ~ 1.9 | □ | |||||||||||
| 12 | 0.3 | 0.5 | 1 | 1.5 | 2 | 3 | 38 | 100 | 12 | 2 | ● | |
| 0.1 ~ 2.5 | □ | |||||||||||
| 16 | 0.5 | 1 | 2 | 3 | 48 | 110 | 16 | 2 | ● | |||
| 0.1 ~ 2.9 | □ | |||||||||||
| 20 | 0.5 | 1 | 2 | 3 | 56 | 130 | 20 | 2 | ● | |||
| 0.1 ~ 2.9 | □ | |||||||||||
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products do not have a coating. Refer to >>Click here for information about re-coating during additional processing.
For Cutting Conditions, Refer to >>Click here.
For Coating Service, Refer to >>Click here.
For Carbide End Mill Coating Types and Features, Refer to >>Click here.
Weitere Informationen
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
● A multi-functional end mill product with added curvature.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.
● The radial blade tip is useful to prevent chipping.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| R Precision(μm) | ±0.01 |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-CR-HEM4R
- SNR-TSC-CR-HEM4R
- TSC-CR-HEM4R
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.