TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model (Teilenummern)
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Kurze Schneidenlänge mit Schneidkantenradius, der an den 2-Schneidenfräser für allgemeine Zwecke angebracht ist
-Radius-Schneide ist auch wirksam bei der Unterdrückung von Ausbrüchen
-Kann nachgeschliffen werden. Bitte lesen Sie auf der Seite "Nachschleifservice" nach, wo Sie Informationen zur Anwendung, zum Leistungsumfang, zu den Preisen usw. finden.
- TS
- General Steel
- 2 Flutes
- B (Stub)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | R Precision (μm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Arbeitstage | 6 | 0.5 | 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 1 | 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 1.5 | 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 2 | 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.5 | 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1 | 12 | 60 | 8 | 17 ～ 30 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1.5 | 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 2 | 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 0.5 | 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 0.7 | 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1 | 15 | 70 | 10 | 20 ～ 35 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 2 | 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 3 | 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 0.7 | 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1 | 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 2 | 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 3 | 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.5 | 5 ～ 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 1 | 5 ～ 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 1.5 | 5 ～ 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 2 | 5 ～ 9 | 45 | 6 | 14 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.5 | 5 ～ 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1 | 5 ～ 12 | 60 | 8 | 17 ～ 30 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1.5 | 5 ～ 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 2 | 5 ～ 12 | 60 | 8 | 17 ～ 36 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 0.5 | 5 ～ 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 0.7 | 5 ～ 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1 | 5 ～ 15 | 70 | 10 | 20 ～ 35 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 2 | 5 ～ 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 3 | 5 ～ 15 | 70 | 10 | 20 ～ 40 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 0.7 | 5 ～ 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1 | 5 ～ 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 2 | 5 ～ 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 3 | 5 ～ 18 | 75 | 12 | 23 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
33.90 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 0.1 | 1.5 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
32.93 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 0.2 | 1.5 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
32.93 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 0.2 | 2.25 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
35.91 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 0.1 | 3 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
34.92 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 0.2 | 3 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
34.92 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 0.3 | 3 | 40 | 6 | - | ±0.01 | Stocked Product | 1 | |
47.55 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.3 | 4.5 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
47.55 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.5 | 4.5 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
- | 1 | 13 Arbeitstage | 3.5 | 0.1 ～ 0.7 | 5.25 | 40 | 6 | - | ±0.02 | Manufactured Product | 1 | ||
47.55 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.5 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
47.72 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.8 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
- | 1 | 13 Arbeitstage | 4 | 0.1 ～ 1 | 6 | 45 | 6 | - | ±0.02 | Manufactured Product | 1 | ||
47.55 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.5 | 7.5 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
- | 1 | 13 Arbeitstage | 5.5 | 0.1 ～ 1.7 | 8.25 | 45 | 6 | - | ±0.02 | Manufactured Product | 1 | ||
41.85 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.5 | 9 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
42.13 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 1 | 9 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
42.56 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 1.5 | 9 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
42.56 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 2 | 9 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
- | 1 | 13 Arbeitstage | 6 | 0.1 ～ 2 | 9 | 45 | 6 | - | ±0.02 | Manufactured Product | 2 | ||
57.78 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 0.5 | 12 | 60 | 8 | - | ±0.01 | Stocked Product | 2 | |
57.37 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 1 | 12 | 60 | 8 | - | ±0.01 | Stocked Product | 2 | |
57.78 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 1.5 | 12 | 60 | 8 | - | ±0.01 | Stocked Product | 2 | |
56.90 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 2 | 12 | 60 | 8 | - | ±0.01 | Stocked Product | 2 | |
- | 1 | 13 Arbeitstage | 8 | 0.1 ～ 3 | 12 | 60 | 8 | - | ±0.02 | Manufactured Product | 2 | ||
81.53 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 0.5 | 15 | 70 | 10 | - | ±0.01 | Stocked Product | 2 | |
81.83 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 0.7 | 15 | 70 | 10 | - | ±0.01 | Stocked Product | 2 |
Loading...
Spezifikationen
Model Number
TSC-CR-EM2B
| Outer Diameter D |
Radius R | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
|||||||||
| 1 | 0.1 | 0.2 | 1.5 | 40 | 4 | 1 | ● | ||||||||
| 1.5 | 0.2 | 2.25 | 40 | 4 | 1 | ● | |||||||||
| 2 | 0.1 | 0.2 | 0.3 | 3 | 40 | 4 | 1 | ● | |||||||
| 3 | 0.3 | 0.5 | 4.5 | 45 | 6 | 1 | ● | ||||||||
| 0.1 ~ 0.7 | □ | ||||||||||||||
| 3.5 | 0.1 ~ 0.7 | 5.25 | 40 | 6 | 1 | □ | |||||||||
| 4 | 0.5 | 0.8 | 6 | 45 | 6 | 1 | ● | ||||||||
| 0.1 ~ 1.0 | □ | ||||||||||||||
| 4.5 | 0.1 ~ 1.2 | 6.75 | 45 | 6 | 1 | □ | |||||||||
| 5 | 0.5 | 7.5 | 45 | 6 | 1 | ● | |||||||||
| 0.1 ~ 1.5 | □ | ||||||||||||||
| 5.5 | 0.1 ~ 1.7 | 8.25 | 45 | 6 | 1 | □ | |||||||||
| 6 | 0.5 | 1 | 1.5 | 2 | 9 | 45 | 6 | 2 | ● | ||||||
| 0.1 ~ 1.9 | □ | ||||||||||||||
| 8 | 0.5 | 1 | 1.5 | 2 | 12 | 60 | 8 | 2 | ● | ||||||
| 0.1 ~ 3.0 | □ | ||||||||||||||
| 10 | 0.5 | 0.7 | 1 | 2 | 3 | 15 | 70 | 10 | 2 | ● | |||||
| 0.1 ~ 2.9 | □ | ||||||||||||||
| 12 | 0.5 | 0.7 | 1 | 2 | 3 | 18 | 75 | 12 | 2 | ● | |||||
| 0.1 ~ 2.9 | □ | ||||||||||||||
| 16 | 0.1 ~ 3.0 | 24 | 100 | 16 | 2 | □ | |||||||||
| 20 | 0.1 ~ 3.0 | 30 | 100 | 20 | 2 | □ | |||||||||
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products with a TS coating are shipped on the 10th day.
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● A general purpose 2-flute end mill product with added high-accuracy curvature.
● The radial blade tip is also useful to prevent chipping.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
R Precision(μm)
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-CR-EM2B
- SNR-TSC-CR-EM2B
- TSC-CR-EM2B
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
- 13 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.