TSC series carbide radius end mill, 2-flute / short model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Kurze Schneidenlänge mit Schneidkantenradius, der an den 2-Schneidenfräser für allgemeine Zwecke angebracht ist
-Radius-Schneide ist auch wirksam bei der Unterdrückung von Ausbrüchen
-Kann nachgeschliffen werden. Bitte lesen Sie auf der Seite "Nachschleifservice" nach, wo Sie Informationen zur Anwendung, zum Leistungsumfang, zu den Preisen usw. finden.
- TS
- General Steel
- 2 Flutes
- S (Short)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | R Precision (μm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Arbeitstage | 6 | 0.2 | 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 0.3 | 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 0.5 | 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 1 | 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 1.5 | 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 2 | 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.2 | 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.3 | 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.5 | 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1 | 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 0.5 | 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1 | 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1.5 | 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 2 | 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 3 | 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 0.5 | 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1 | 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1.5 | 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 2 | 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.2 | 5 ～ 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.3 | 5 ～ 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.5 | 5 ～ 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 1 | 5 ～ 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 1.5 | 5 ～ 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 2 | 5 ～ 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.2 | 5 ～ 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.3 | 5 ～ 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.5 | 5 ～ 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1 | 5 ～ 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 0.5 | 5 ～ 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1 | 5 ～ 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1.5 | 5 ～ 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 2 | 5 ～ 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 3 | 5 ～ 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 0.5 | 5 ～ 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1 | 5 ～ 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1.5 | 5 ～ 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 2 | 5 ～ 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
29.65 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 0.1 | 2 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 0.2 | 2 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 0.3 | 2 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 0.1 | 3 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 0.2 | 3 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 0.3 | 3 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
30.62 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 0.5 | 3 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 0.1 | 4 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 0.2 | 4 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 0.3 | 4 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 0.5 | 4 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.65 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 0.1 | 5 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.74 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 0.2 | 5 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.74 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 0.3 | 5 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
29.91 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 0.5 | 5 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
- | 1 | 13 Arbeitstage | 2.5 | 0.1 ～ 0.5 | 5 | 40 | 4 | - | ±0.02 | Manufactured Product | 1 | ||
- | 1 | 13 Arbeitstage | 2.8 | 0.1 ～ 0.5 | 5.6 | 40 | 4 | - | ±0.02 | Manufactured Product | 1 | ||
38.15 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.1 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
38.15 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.2 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
38.15 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.3 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
38.32 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.4 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
38.15 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.5 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 |
Loading...
Spezifikationen
Model Number
TSC-CR-EM2S
| Outer Diameter D |
Radius R | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
||||||||
| 1 | 0.1 | 0.2 | 0.3 | 2 | 40 | 4 | 1 | ● | ||||||
| 1.5 | 0.1 | 0.2 | 0.3 | 0.5 | 3 | 40 | 4 | 1 | ● | |||||
| 2 | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 4 | 40 | 4 | 1 | ● | ||||
| 2.5 | 0.1 | 0.2 | 0.3 | 0.5 | 5 | 40 | 4 | 1 | ● | |||||
| 0.4 | □ | |||||||||||||
| 2.8 | 0.1 - 0.5 | 5.6 | 40 | 4 | 1 | □ | ||||||||
| 3 | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 1 | 6 | 45 | 6 | 1 | ● | |||
| 0.6 - 0.7 | □ | |||||||||||||
| 3.5 | 0.1 - 0.7 | 7 | 45 | 6 | 1 | □ | ||||||||
| 4 | 0.2 | 0.3 | 0.4 | 0.5 | 1 | 8 | 45 | 6 | 1 | ● | ||||
| 0.1 - 0.9 | □ | |||||||||||||
| 4.5 | 0.1 - 1.2 | 9 | 45 | 6 | 1 | □ | ||||||||
| 5 | 0.1 | 0.2 | 0.3 | 0.5 | 1 | 10 | 45 | 6 | 1 | ● | ||||
| 0.4 - 1.5 | □ | |||||||||||||
| 5.5 | 0.1 ~ 1.7 | 11 | 45 | 6 | 1 | □ | ||||||||
| 6 | 0.2 | 0.3 | 0.5 | 1 | 1.5 | 2 | 12 | 45 | 6 | 2 | ● | |||
| 0.1 ~ 2.0 | □ | |||||||||||||
| 8 | 0.2 | 0.3 | 0.5 | 1 | 16 | 55 | 8 | 2 | ● | |||||
| 0.1 ~ 3.0 | □ | |||||||||||||
| 10 | 0.5 | 1 | 1.5 | 2 | 3 | 20 | 65 | 10 | 2 | ● | ||||
| 0.1 ~ 3.0 | □ | |||||||||||||
| 12 | 0.5 | 1 | 1.5 | 2 | 24 | 75 | 12 | 2 | ● | |||||
| 0.1 ~ 3.0 | □ | |||||||||||||
| 16 | 0.1 ~ 3.0 | 32 | 105 | 16 | 2 | □ | ||||||||
| 20 | 0.1 ~ 3.0 | 40 | 110 | 20 | 2 | □ | ||||||||
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products with a TS coating are shipped on the 10th day.
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● A general purpose 2-flute end mill product with added high-accuracy curvature.
● The radial blade tip is also useful to prevent chipping.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
R Size(mm)
- 0.1
- 0.2
- 0.3
- 0.4
- 0.5
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
- 3
[0.1-3/0.1mmTeile]
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
R Precision(μm)
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-CR-EM2S
- SNR-TSC-CR-EM2S
- TSC-CR-EM2S
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
- 13 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.