TSC series carbide radius end mill, 4-flute / short model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Kurze Schneidenlänge mit Schneidkantenradius, der an einem Allzweckfräser mit 4 Schneiden angebracht ist
-Radius-Schneide ist auch wirksam bei der Unterdrückung von Ausbrüchen
-Kann nachgeschliffen werden. Bitte lesen Sie auf der Seite "Nachschleifservice" nach, wo Sie Informationen über Verfahren, Leistungsumfang, Preise usw. finden.
- TS
- General Steel
- 4 Flutes
- S (Short)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | R Precision (μm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Arbeitstage | 6 | 0.2 | 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 0.3 | 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 0.5 | 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 1 | 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.5 | 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1 | 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 2 | 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 0.5 | 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1 | 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 2 | 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 3 | 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1 | 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1.5 | 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 2 | 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 3 | 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.2 | 5 ～ 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.3 | 5 ～ 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.5 | 5 ～ 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 1 | 5 ～ 12 | 45 | 6 | 17 ～ 27 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.5 | 5 ～ 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1 | 5 ～ 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 2 | 5 ～ 16 | 55 | 8 | 21 ～ 31 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 0.5 | 5 ～ 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1 | 5 ～ 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 2 | 5 ～ 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 3 | 5 ～ 20 | 65 | 10 | 25 ～ 35 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1 | 5 ～ 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1.5 | 5 ～ 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 2 | 5 ～ 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 3 | 5 ～ 24 | 75 | 12 | 29 ～ 45 | ±0.01 | Cutting Edge R Processing | 2 | ||
39.52 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 0.2 | 2 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
54.39 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 0.5 | 4 | 40 | 4 | - | ±0.01 | Stocked Product | 1 | |
53.72 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.5 | 6 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
- | 1 | 13 Arbeitstage | 3 | 0.1 ～ 0.7 | 6 | 45 | 6 | - | ±0.02 | Manufactured Product | 1 | ||
- | 1 | 13 Arbeitstage | 3.5 | 0.1 ～ 0.7 | 7 | 45 | 6 | - | ±0.02 | Manufactured Product | 1 | ||
51.09 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.5 | 8 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
- | 1 | 13 Arbeitstage | 4 | 0.1 ～ 1 | 8 | 45 | 6 | - | ±0.02 | Manufactured Product | 1 | ||
49.74 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.2 | 10 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
50.65 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.3 | 10 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
52.28 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.5 | 10 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
47.72 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.2 | 12 | 45 | 6 | - | ±0.01 | Stocked Product | 2 | |
49.45 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.3 | 12 | 45 | 6 | - | ±0.01 | Stocked Product | 2 | |
67.32 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.5 | 12 | 45 | 6 | - | ±0.01 | Stocked Product | 2 | |
58.47 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 1 | 12 | 45 | 6 | - | ±0.01 | Stocked Product | 2 | |
- | 1 | 13 Arbeitstage | 6 | 0.1 ～ 1.2 | 12 | 45 | 6 | - | ±0.02 | Manufactured Product | 2 | ||
63.97 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 0.5 | 16 | 55 | 8 | - | ±0.01 | Stocked Product | 2 | |
90.00 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 1 | 16 | 55 | 8 | - | ±0.01 | Stocked Product | 2 | |
108.59 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 2 | 16 | 55 | 8 | - | ±0.01 | Stocked Product | 2 | |
- | 1 | 13 Arbeitstage | 8 | 0.1 ～ 1.4 | 16 | 55 | 8 | - | ±0.02 | Manufactured Product | 2 | ||
85.22 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 0.5 | 20 | 65 | 10 | - | ±0.01 | Stocked Product | 2 | |
91.55 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 1 | 20 | 65 | 10 | - | ±0.01 | Stocked Product | 2 | |
116.95 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 2 | 20 | 65 | 10 | - | ±0.01 | Stocked Product | 2 | |
85.66 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 3 | 20 | 65 | 10 | - | ±0.01 | Stocked Product | 2 | |
- | 1 | 13 Arbeitstage | 10 | 0.1 ～ 3 | 20 | 65 | 10 | - | ±0.02 | Manufactured Product | 2 | ||
138.25 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 1 | 24 | 75 | 12 | - | ±0.01 | Stocked Product | 2 | |
112.38 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 1.5 | 24 | 75 | 12 | - | ±0.01 | Stocked Product | 2 | |
129.91 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 2 | 24 | 75 | 12 | - | ±0.01 | Stocked Product | 2 | |
129.91 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 3 | 24 | 75 | 12 | - | ±0.01 | Stocked Product | 2 | |
- | 1 | 13 Arbeitstage | 12 | 0.1 ～ 3 | 24 | 75 | 12 | - | ±0.02 | Manufactured Product | 2 |
Loading...
Spezifikationen
Model Number
TSC-CR-EM4S
| Outer Diameter D |
Radius R | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| 1 | 0.2 |
2 | 40 | 4 | 1 | ● |
| 2 | 0.5 |
4 | 40 | 4 | 1 | ● |
| 3 | 0.5 |
6 | 45 | 6 | 1 | ● |
| 0.1 ~ 0.7 |
□ | |||||
| 3.5 | 0.1 ~ 0.7 |
7 | 45 | 6 | 1 | □ |
| 4 | 0.5 |
8 | 45 | 6 | 1 | ● |
| 0.1 ~ 1.0 |
□ | |||||
| 4.5 |
0.1 ~ 1.0 |
9 | 45 | 6 | 1 | □ |
| 5 | 0.2 0.3 0.5 |
10 | 45 | 6 | 1 | ● |
| 0.1 ~ 1.0 |
□ | |||||
| 5.5 | 0.1 ~ 1.0 |
11 | 45 | 6 | 1 | □ |
| 6 | 0.2 0.3 0.5 1 |
12 | 45 | 6 | 2 | ● |
| 0.1 ~ 1.2 |
□ | |||||
| 8 | 0.5 1 2 |
16 | 55 | 8 | 2 | ● |
| 0.1 ~ 1.4 |
□ | |||||
| 10 | 0.5 1 2 3 |
20 | 65 | 10 | 2 | ● |
| 0.1 ~ 2.9 |
□ | |||||
| 12 | 1 1.5 2 3 |
24 | 75 | 12 | 2 | ● |
| 0.1 ~ 2.9 | □ |
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products with a TS coating are shipped on the 10th day.
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● A general purpose 4-flute end mill product with added high-accuracy curvature.
● The radial blade tip is also useful to prevent chipping.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
R Precision(μm)
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-CR-EM4S
- SNR-TSC-CR-EM4S
- TSC-CR-EM4S
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
- 13 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.