TSC series carbide radius end mill, 4-flute / regular model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Regelmäßige Schneidenlänge mit Schneidkantenradius, der an einen Allzweckfräser mit 4 Schneiden angebracht ist
-Radius-Schneide ist auch wirksam bei der Unterdrückung von Ausbrüchen
-Kann nachgeschliffen werden. Bitte lesen Sie auf der Seite "Nachschleifservice" nach, wo Sie Informationen zu Einsatzverfahren, Leistungsspektrum, Preisen usw. finden.
- TS
- General Steel
- 4 Flutes
- R (Regular)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | R Precision (μm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Arbeitstage | 6 | 0.3 | 18 | 60 | 6 | 23 ～ 42 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 0.5 | 18 | 60 | 6 | 23 ～ 42 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 1 | 18 | 60 | 6 | 23 ～ 42 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.5 | 24 | 70 | 8 | 29 ～ 46 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1 | 24 | 70 | 8 | 29 ～ 46 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1.5 | 24 | 70 | 8 | 29 ～ 46 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 0.5 | 30 | 80 | 10 | 35 ～ 50 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1 | 30 | 80 | 10 | 35 ～ 50 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1.5 | 30 | 80 | 10 | 35 ～ 50 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 2 | 30 | 80 | 10 | 35 ～ 50 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 3 | 30 | 80 | 10 | 35 ～ 50 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1 | 36 | 85 | 12 | 41 ～ 55 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1.5 | 36 | 85 | 12 | 41 ～ 55 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 2 | 36 | 85 | 12 | 41 ～ 55 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 3 | 36 | 85 | 12 | 41 ～ 55 | ±0.01 | Standard Neck Relief | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.3 | 5 ～ 18 | 60 | 6 | 23 ～ 42 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.5 | 5 ～ 18 | 60 | 6 | 23 ～ 42 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 1 | 5 ～ 18 | 60 | 6 | 23 ～ 42 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.5 | 5 ～ 24 | 70 | 8 | 29 ～ 46 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1 | 5 ～ 24 | 70 | 8 | 29 ～ 46 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1.5 | 5 ～ 24 | 70 | 8 | 29 ～ 46 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 0.5 | 5 ～ 30 | 80 | 10 | 35 ～ 50 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1 | 5 ～ 30 | 80 | 10 | 35 ～ 50 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1.5 | 5 ～ 30 | 80 | 10 | 35 ～ 50 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 2 | 5 ～ 30 | 80 | 10 | 35 ～ 50 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1 | 5 ～ 36 | 85 | 12 | 41 ～ 55 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1.5 | 5 ～ 36 | 85 | 12 | 41 ～ 55 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 2 | 5 ～ 36 | 85 | 12 | 41 ～ 55 | ±0.01 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 3 | 5 ～ 36 | 85 | 12 | 41 ～ 55 | ±0.01 | Cutting Edge R Processing | 2 | ||
57.16 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 0.2 | 3 | 45 | 4 | - | ±0.01 | Stocked Product | 1 | |
48.22 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 0.3 | 6 | 45 | 4 | - | ±0.01 | Stocked Product | 1 | |
51.23 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 0.5 | 6 | 45 | 4 | - | ±0.01 | Stocked Product | 1 | |
39.93 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.2 | 9 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
51.85 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.3 | 9 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
57.67 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.5 | 9 | 45 | 6 | - | ±0.01 | Stocked Product | 1 | |
53.70 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.3 | 12 | 50 | 6 | - | ±0.01 | Stocked Product | 1 | |
59.59 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.5 | 12 | 50 | 6 | - | ±0.01 | Stocked Product | 1 | |
114.07 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.3 | 15 | 55 | 6 | - | ±0.01 | Stocked Product | 1 | |
114.07 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.5 | 15 | 55 | 6 | - | ±0.01 | Stocked Product | 1 | |
81.78 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.3 | 18 | 60 | 6 | - | ±0.01 | Stocked Product | 2 | |
67.78 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.5 | 18 | 60 | 6 | - | ±0.01 | Stocked Product | 2 | |
52.70 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 1 | 18 | 60 | 6 | - | ±0.01 | Stocked Product | 2 | |
82.68 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 0.5 | 24 | 70 | 8 | - | ±0.01 | Stocked Product | 2 | |
88.66 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 1 | 24 | 70 | 8 | - | ±0.01 | Stocked Product | 2 | |
80.42 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 1.5 | 24 | 70 | 8 | - | ±0.01 | Stocked Product | 2 | |
93.46 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 0.5 | 30 | 80 | 10 | - | ±0.01 | Stocked Product | 2 | |
101.32 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 1 | 30 | 80 | 10 | - | ±0.01 | Stocked Product | 2 | |
135.45 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 1.5 | 30 | 80 | 10 | - | ±0.01 | Stocked Product | 2 | |
95.04 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 2 | 30 | 80 | 10 | - | ±0.01 | Stocked Product | 2 | |
90.04 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 3 | 30 | 80 | 10 | - | ±0.01 | Stocked Product | 2 | |
141.68 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 1 | 36 | 85 | 12 | - | ±0.01 | Stocked Product | 2 | |
160.83 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 1.5 | 36 | 85 | 12 | - | ±0.01 | Stocked Product | 2 | |
137.58 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 2 | 36 | 85 | 12 | - | ±0.01 | Stocked Product | 2 | |
125.87 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 3 | 36 | 85 | 12 | - | ±0.01 | Stocked Product | 2 |
Loading...
Spezifikationen
Model Number
TSC-CR-EM4R
| Outer Diameter D |
Radius R Selection (Manufactured products designated in 0.1 mm increment) |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| 1 | 0.2 |
3 | 45 | 4 | 1 | ● |
| 2 |
0.3 0.5 |
6 | 45 | 4 | 1 | ● |
| 3 | 0.2 0.3 0.5 |
9 | 45 | 6 | 1 | ● |
| 0.1 ~ 0.7 |
□ | |||||
| 3.5 |
0.1 ~ 0.7 |
10.5 | 45 | 6 | 1 | □ |
| 4 | 0.3 0.5 |
12 | 50 | 6 | 1 | ● |
| 0.1 ~ 1.0 |
□ | |||||
| 4.5 |
0.1 ~ 1.0 |
13.5 | 50 | 6 | 1 | □ |
| 5 | 0.3 0.5 |
15 | 55 | 6 | 1 | ● |
| 0.1 ~ 1.0 |
□ | |||||
| 5.5 |
0.1 ~ 1.0 |
16.5 | 55 | 6 | 1 | □ |
| 6 | 0.3 0.5 1 |
18 | 60 | 6 | 2 | ● |
| 0.1 ~ 1.2 |
□ | |||||
| 8 | 0.5 1 1.5 |
24 | 70 | 8 | 2 | ● |
| 0.1 ~ 1.4 |
□ | |||||
| 10 | 0.5 1 1.5 2 3 |
30 | 80 | 10 | 2 | ● |
| 0.1 ~ 2.9 |
□ | |||||
| 12 | 1 1.5 2 3 |
36 | 85 | 12 | 2 | ● |
| 0.1 ~ 2.9 | □ |
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products with a TS coating are shipped on the 10th day.
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● A general purpose 4-flute end mill product with added high-accuracy curvature.
● The radial blade tip is also useful to prevent chipping.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Cutting Edge R Processing
- Manufactured Product
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-CR-EM4R
- SNR-TSC-CR-EM4R
- TSC-CR-EM4R
-
R Precision(μm)
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
- 13 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.