TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Multifunktionaler langer Halsradius mit hoher Vorschubleistung und hervorragender Haltbarkeit
-Es hat eine Beschichtung mit hoher Oxidationsbeständigkeit und hoher Härte, und erreicht eine lange Nutzungsdauer. Effektiv bei Hochgeschwindigkeitsbearbeitung und Trockenbearbeitung als Beschichtungseigenschaften
-Kann nachgeschliffen werden. Bitte beachten Sie die Seite "Nachschleifservice" für Anwendungsprozeduren, Leistungsspektrum, Preise, etc.
- TS
- General Steel
- 3 Flutes
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
LN-TSC-CR-HEM3S4-R0.5-[16-38/1]
Teilenummer
|
|---|
| LN-TSC-CR-HEM3S4-R0.5-[16-38/1] |
| Teilenummer | Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | R Size (mm) | Work Material | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | R Precision (μm) | Additional Classification | #6 | Figure | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 Arbeitstage | 4 | 0.5 | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 3.2 | 4 | 70 | 6 | - | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | ±0.01 | Manufactured Product | 16 ～ 38 | 2 | 3.8 | - | - | - | - |
Loading...
Spezifikationen
Model Number
TSC-CR-HEM3LB (Stocked Product) / LN-TSC-CR-HEM3S (Manufactured Product)
| Outer Diameter D |
Length Under Neck ℓ1 (Manufactured products designated in 1 mm increment) |
Radius R |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | ● Stocked Product □ Manufactured Product |
|||
| 30' | 1° | 2° | 3° | |||||||||
| 1 | 6 | 0.2 0.3 | 0.8 | 0.95 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 | ● |
| 8 | 8.38 | 8.79 | 9.76 | 10.98 | ● | |||||||
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ● | |||||||
| 1.5 | 6 | 0.2 0.3 | 1.2 | 1.45 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 | ● |
| 8 | 8.38 | 8.79 | 9.76 | 10.98 | ● | |||||||
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ● | |||||||
| 2 | 10 | 0.2 0.5 | 1.6 | 1.95 | 50 | 4 | 10.47 | 10.99 | 12.21 | 13.73 | 1 | ● |
| 12 | 12.57 | 13.19 | 14.65 | 16.48 | ● | |||||||
| 14 | 14.66 | 15.39 | 17.09 | 19.22 | ● | |||||||
| 16 | 16.75 | 17.58 | 19.53 | Without Interference | ● | |||||||
| 20 | 70 | 20.94 | 21.98 | 24.41 | Without Interference | ● | ||||||
| 2.5 | 16 | 0.2 0.5 | 2 | 2.4 | 70 | 4 | 16.75 | 17.58 | 19.53 | Without Interference | 1 | ● |
| 20 | 20.94 | 21.98 | Without Interference | Without Interference | ● | |||||||
| 30 | 31.41 | 32.97 | Without Interference | Without Interference | ● | |||||||
| 3 | 16 | 0.2 0.5 1 | 2.4 | 2.9 | 70 | 6 | 16.75 | 17.58 | 19.53 | 21.97 | 1 | ● |
| 20 | 20.94 | 21.98 | 24.41 | 27.46 | ● | |||||||
| 30 | 31.41 | 32.97 | 36.62 | Without Interference | ● | |||||||
| 13 ~ 36 | 0.3 0.5 | 8 | 60 | - | - | - | - | 2 | □ | |||
| 4 | 16 | 0.2 0.5 1 | 3.2 | 3.8 | 70 | 6 | 16.75 | 17.58 | 19.53 | Without Interference | 1 | ● |
| 20 | 20.94 | 21.98 | 24.41 | Without Interference | ● | |||||||
| 30 | 31.41 | 32.97 | Without Interference | Without Interference | ● | |||||||
| 16 ~ 38 | 0.3 0.5 | 11 | 60 | - | - | - | - | 2 | □ | |||
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the points below differ when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number. (3) The order for specifying the "length under neck" and "radius" is the opposite.
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
Grundlegende Informationen
| Model | Long Neck Radius | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
|---|
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Curved Surface
- Nut
- Inclined Cutting
-
R Precision(μm)
-
Additional Classification
- Manufactured Product
- Stocked Product
-
#6
-
Ausführung
- LN-TSC-CR-HEM3S
- TSC-CR-HEM3LB
-
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- High-Hardness Steel ~ HRC60
- Edelstahl
- Gusseisen
- Aluminum Alloy
- Copper Alloy
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.