• Marken
  • Unternehmen
  • Kontakt
DE
TYPENCODE Suche | *NOT READY*
#CODE
Suchwort-Vorschlag
Vorgeschlagene Teilenummer
Auslaufprodukte

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

Klicken Sie auf dieses Bild, um es zu vergrößern.

Klicken Sie auf dieses Bild, um es zu vergrößern.

  • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
  • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

MISUMI

MISUMI

[Merkmale]
-Alterationsfräser, der den Radius des Hartmetallfräsers in 0,1 mm-Schritten bestimmen kann
-Kann nachgeschliffen werden. Bitte informieren Sie sich auf der Seite "Nachschleifservice" über Einsatzmöglichkeiten, Leistungsspektrum, Preise, etc.
  • Non-Coated
  • General Steel

Teilenummer

Hier finden Sie die Teilenummern
zu dem gesuchten Artikel

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill:Related Image
Daten, die angezeigt werden sollen
30
45
60
  1. 1
Teilenummer
TSC-REM2B4-R[0.1-1/0.1]
TSC-REM2L10-R[0.1-3/0.1]
TSC-REM2L12-R[0.1-3/0.1]
TSC-REM2S2.5-R[0.1-0.5/0.1]
TSC-REM4B10-R[0.1-3/0.1]
TSC-REM4B12-R[0.1-3/0.1]
TSC-REM4R10-R[0.1-3/0.1]
TSC-REM4S10-R[0.1-3/0.1]
TeilenummerMindestbestellmengeMengenrabatt
Reguläre
Versanddauer
?
Outer Diameter (D)
(φ) 		R Size
(mm) 		Work Material Flute Length (ℓ)
(mm) 		Number of Flutes
(sheet) 		Overall Length (L)
(mm) 		Shank Diameter (d)
(mm) 		Processing Applications Coating Figure
1 13 Arbeitstage 40.1 ～ 1General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○]62456Flat Surface / Side Surface / Curved Surface / Nut / Inclined CuttingFor High Hardness (Silicone-Based)1
1 13 Arbeitstage 100.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○]40210010Flat Surface / Side Surface / Curved Surface / Nut / Inclined CuttingFor High Hardness (Silicone-Based)2
1 13 Arbeitstage 120.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○]48210012Flat Surface / Side Surface / Curved Surface / Nut / Inclined CuttingFor High Hardness (Silicone-Based)2
1 13 Arbeitstage 2.50.1 ～ 0.5General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○]52404Flat Surface / Side Surface / Curved Surface / Nut / Inclined CuttingFor High Hardness (Silicone-Based)1
1 13 Arbeitstage 100.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○]1547010Flat Surface / Side Surface / Curved Surface / Inclined CuttingFor High Hardness (Silicone-Based)2
1 13 Arbeitstage 120.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○]1847512Flat Surface / Side Surface / Curved Surface / Inclined CuttingFor High Hardness (Silicone-Based)2
1 13 Arbeitstage 100.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○]3048010Flat Surface / Side Surface / Curved Surface / Inclined CuttingFor High Hardness (Silicone-Based)2
1 13 Arbeitstage 100.1 ～ 3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○]2046510Flat Surface / Side Surface / Curved Surface / Inclined CuttingFor High Hardness (Silicone-Based)2

Loading...

  1. 1

Spezifikationen

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill:Related Image


Model Number
SEC-REM2B / TSC-REM2B
SEC-REM4B / TSC-REM4B (1.5 D Blade Length Type)
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.74.54561
3.50.1 ~ 0.75.254561
40.1 ~ 1.064561
4.50.1 ~ 1.06.754561
50.1 ~ 1.07.54561
5.50.1 ~ 1.08.254561
60.1 ~ 1.294562
80.1 ~ 2.0126082
100.1 ~ 3.01570102
120.1 ~ 3.01875122
160.1 ~ 3.024100162
200.1 ~ 3.030105202

Model Number
SEC-REM2S / TSC-REM2S
SEC-REM4S / TSC-REM4S (2 D Blade Length Type)
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
20.1 ~ 0.544041
2.50.1 ~ 0.554041
2.80.1 ~ 0.55.64041
30.1 ~ 0.764561
3.50.1 ~ 0.774561
40.1 ~ 1.084561
4.50.1 ~ 1.094561
50.1 ~ 1.0104561
5.50.1 ~ 1.0114561
60.1 ~ 1.2124562
80.1 ~ 2.0165582
100.1 ~ 3.02065102
120.1 ~ 3.02475122
160.1 ~ 3.032100162
200.1 ~ 3.040105202

Model Number
SEC-REM2SR / TSC-REM2SR (2.5 D Blade Length Type)
 * There is no standard for 4 flutes.iece
1 Piece Unit
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.77.54561
40.1 ~ 1.0105061
50.1 ~ 1.012.55561
60.1 ~ 1.2156062
80.1 ~ 2.0207082
100.1 ~ 3.02580102
120.1 ~ 3.03085122

Model Number
SEC-REM2R / TSC-REM2R
SEC-REM4R / TSC-REM4R (3 D Blade Length Type)
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
20.1 ~ 0.564541
2.50.1 ~ 0.57.54541
2.80.1 ~ 0.58.44541
30.1 ~ 0.794561
3.50.1 ~ 0.710.54561
40.1 ~ 1.0125061
4.50.1 ~ 1.013.55061
50.1 ~ 1.0155561
5.50.1 ~ 1.016.55561
60.1 ~ 1.2186062
80.1 ~ 2.0247082
100.1 ~ 3.03080102
120.1 ~ 3.03685122
160.1 ~ 3.048115162
200.1 ~ 3.060125202

Model Number
SEC-REM2RL / TSC-REM2RL (3.5 D Blade Length Type)
 * There is no standard for 4 flutes.
1 Piece Unit
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.710.54561
40.1 ~ 1.0145061
50.1 ~ 1.017.55561
60.1 ~ 1.2216062
80.1 ~ 2.0287082
100.1 ~ 3.03580102
120.1 ~ 3.04295122

Model Number
SEC-REM2L / TSC-REM2L (4 D Blade Length Type) 
* There is no standard for 4 flutes.
1 Piece Unit
Flute Diameter
D		Corner R
0.1 mm Increment Designation		Blade Length
ℓ		Overall Length
L		Shank Diameter
d		Figure
30.1 ~ 0.7125061
40.1 ~ 1.0166061
50.1 ~ 1.0206061
60.1 ~ 1.2246062
80.1 ~ 2.03210082
100.1 ~ 3.040100102
120.1 ~ 3.048100122


For Cutting Conditions, Refer to >>Click here.

Grundlegende Informationen

Model Radius Torsion Angle (θ) Standard Helix (30 to 40°) R Precision(μm) ±0.02
Additional Classification Manufactured Product

Konfigurieren

Zurücksetzen

8Vorgeschlagene Teilenummer

Teilenummern anzeigen

Einige Spezifikationen sind bisher nicht festgelegt.
Die Teilenummer wurde erkannt.

Basiseigenschaften

  • Outer Diameter (D)(φ)

    • 1
    • 2
    • 2.5
    • 2.8
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Zurücksetzen

  • R Size(mm)

     [0.1-3/0.1mmTeile]

    Zurücksetzen

  • Flute Length (ℓ)(mm)

    • 4
    • 4.5
    • 5
    • 5.6
    • 6
    • 6.75
    • 7
    • 7.5
    • 8
    • 8.25
    • 8.4
    • 9
    • 10
    • 10.5
    • 11
    • 12
    • 12.5
    • 13.5
    • 14
    • 15
    • 16
    • 16.5
    • 17.5
    • 18
    • 20
    • 21
    • 24
    • 25
    • 28
    • 30
    • 32
    • 35
    • 36
    • 40
    • 42
    • 48
    • 60

    Zurücksetzen

  • Number of Flutes(sheet)

    • 2
    • 4

    Zurücksetzen

  • Overall Length (L)(mm)

    • 40
    • 45
    • 50
    • 55
    • 60
    • 65
    • 70
    • 75
    • 80
    • 85
    • 95
    • 100
    • 105
    • 115
    • 125

    Zurücksetzen

  • Shank Diameter (d)(mm)

    • 4
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Zurücksetzen

  • Processing Applications

    • Flat Surface
    • Side Surface
    • Curved Surface
    • Nut
    • Inclined Cutting

    Zurücksetzen

  • Coating

    • For High Hardness (Silicone-Based)
    • Ohne Beschichtung

    Zurücksetzen

  • Ausführung

    • SEC-REM2B
    • SEC-REM2L
    • SEC-REM2R
    • SEC-REM2RL
    • SEC-REM2S
    • SEC-REM2SR
    • SEC-REM4B
    • SEC-REM4R
    • SEC-REM4S
    • TSC-REM2B
    • TSC-REM2L
    • TSC-REM2S
    • TSC-REM4B
    • TSC-REM4R
    • TSC-REM4S

    Zurücksetzen

  • Work Material

    • General Steel
    • Heat-Treated Steel
    • High-Hardness Steel ~ HRC55
    • Edelstahl
    • Gusseisen
    • Aluminum Alloy
    • Copper Alloy

    Zurücksetzen

Filtern nach vsl. Lieferzeit

    • Alle Produkte
    • 7 Tage oder weniger
    • 13 Tage oder weniger

    Zurücksetzen

Optionale Eigenschaften

Technischer Support

Technische Anfrage

Bezahlverfahren

  • Rechnung
  • Vorauskasse
  • PayPal

On-Demand-Fertigung

Ansicht ändern

Zertifikate

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI weltweit

Social Media

Rechtliche Hinweise

Copyright © MISUMI Corporation All Rights Reserved.