TiAlN Coated Carbide Long Drill, Straight Shank
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
Teilenummer
|
|---|
| TAC-HSDXL5-90 |
| TAC-HSDXL7-60 |
| TAC-HSDXL9-100 |
| TAC-HSDXL9-140 |
| TAC-HSDXL10-60 |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Hole diameter (drill diameter) D (mm) | Groove Length L (mm) | Overall Length L (mm) | With/without Oil Hole | Shank Diameter d | Diameter Tolerance | Tolerance of Shank Diameter | |
|---|---|---|---|---|---|---|---|---|---|---|---|
138.68 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 90 | 150 | Included | 5 | 0 ~ -0.018 | 0 ~ -0.008 | |
148.64 € | 1 | Verfügbar | 5 Arbeitstage | 7 | 60 | 100 | Included | 7 | 0 ~ -0.022 | 0 ~ -0.009 | |
212.21 € | 1 | Verfügbar | 5 Arbeitstage | 9 | 100 | 150 | Included | 9 | 0 ~ -0.022 | 0 ~ -0.009 | |
271.04 € | 1 | Verfügbar | 5 Arbeitstage | 9 | 140 | 200 | Included | 9 | 0 ~ -0.022 | 0 ~ -0.009 | |
204.61 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 60 | 100 | Included | 10 | 0 ~ -0.022 | 0 ~ -0.009 |
Loading...
Spezifikationen
| Model Number | Groove Length ℓ | Overall Length L | |
| Diameter D | |||
| TAC-SDXL | 3 | 60 | 100 |
| 3 | 90 | 150 | |
| 4 | 60 | 100 | |
| 4 | 90 | 150 | |
| 4 | 120 | 200 | |
| 5 | 60 | 100 | |
| 5 | 90 | 150 | |
| 5 | 120 | 200 | |
| 6 | 60 | 100 | |
| 6 | 90 | 150 | |
| 6 | 120 | 200 | |
| 7 | 60 | 100 | |
| 7 | 90 | 150 | |
| 7 | 120 | 200 | |
| 8 | 60 | 100 | |
| 8 | 100 | 150 | |
| 8 | 140 | 200 | |
| 9 | 60 | 100 | |
| 9 | 100 | 150 | |
| 9 | 140 | 200 | |
| 10 | 60 | 100 | |
| 10 | 100 | 150 | |
| 10 | 140 | 200 |
| Model Number | Groove Length ℓ | Overall Length L | |
| Diameter D | |||
| TAC-HSDXL | 3 | 60 | 100 |
| 3 | 90 | 150 | |
3 | 120 | 200 | |
| 4 | 60 | 100 | |
| 4 | 90 | 150 | |
| 4 | 120 | 200 | |
| 5 | 60 | 100 | |
| 5 | 90 | 150 | |
| 5 | 120 | 200 | |
| 6 | 60 | 100 | |
| 6 | 90 | 150 | |
| 6 | 120 | 200 | |
| 7 | 60 | 100 | |
| 7 | 90 | 150 | |
| 7 | 120 | 200 | |
| 8 | 60 | 100 | |
| 8 | 100 | 150 | |
| 8 | 140 | 200 | |
| 9 | 60 | 100 | |
| 9 | 100 | 150 | |
| 9 | 140 | 200 | |
| 10 | 60 | 100 | |
| 10 | 100 | 150 | |
| 10 | 140 | 200 |
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● The discharge of cutting chips is promoted using a special drill groove shape.
● Non-step drilling is possible up to depths of 15 times the diameter, significantly improving the efficiency of drilling deep holes.
● Using a combination of ultrafine particulate carbide + TiAℓN coating, it has superior wear resistance that allows for high-speed machining.
Grundlegende Informationen
| work material | General Steel / Heat-Treated Steel / Gusseisen / Aluminium / Kupfer | Tool Material Type | Carbid | Shank Type | Straight Shank |
|---|---|---|---|---|---|
| Coating Y/N | Included | Coating Type | TiAlN | Point Angle(°) | 130 |
| Thinning | Included |
Konfigurieren
Basiseigenschaften
-
Hole diameter (drill diameter) D(mm)
-
Groove Length L(mm)
-
Overall Length L(mm)
-
Ausführung
- TAC-HSDXL
- TAC-SDXL
-
With/without Oil Hole
- Included
- None
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 9 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.