Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
Teilenummer | Mindestbestellmenge | Mengenrabatt | M Model (M) | Chamfer Angle (Double Angle θ) (°) | Stepped Length (ℓ) (mm) | Tip Diameter (D) (mm) | Shank Diameter d | Tolerance of Shank Diameter | Major Diameter D1 (φ) | ℓ1 (mm) | Groove Length L1 (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 12 Arbeitstage | 3 | 60 ~ 120 | 5 ~ 13 | 2.2 ~ 2.99 | 4 | 0 ~ -0.008 | 4 | 50 | Step Length + 8 | ||
1 | 12 Arbeitstage | 4 | 60 ~ 120 | 5 ~ 18 | 3 ~ 3.89 | 6 | 0 ~ -0.008 | 6 | 59 | Step Length + 13 | ||
1 | 12 Arbeitstage | 5 | 60 ~ 120 | 8 ~ 23 | 3.9 ~ 4.69 | 8 | 0 ~ -0.009 | 8 | 61 | Step Length + 16 | ||
1 | 12 Arbeitstage | 6 | 60 ~ 120 | 10 ~ 28 | 4.7 ~ 6.49 | 8 | 0 ~ -0.009 | 8 | 62 | Step Length + 18 | ||
1 | 12 Arbeitstage | 8 | 60 ~ 120 | 15 ~ 35 | 6.5 ~ 8.19 | 10 | 0 ~ -0.009 | 10 | 69 | Step Length + 24 | ||
1 | 12 Arbeitstage | 10 | 60 ~ 120 | 15 ~ 45 | 8.2 ~ 9.99 | 12 | 0 ~ -0.011 | 12 | 77 | Step Length + 30 | ||
1 | 12 Arbeitstage | 12 | 60 ~ 120 | 20 ~ 50 | 10 ~ 11 | 14 | 0 ~ -0.011 | 14 | 86 | Step Length + 36 |
Loading...
Model Number | Tip Diameter D 0.01 mm Increment Designation | Step Length ℓ 1 mm Increment Designation | Chamfer Angles Double Angle θ (Selection) | Large Diameter D1 | ℓ1 | Groove Length L1 | Overall Length L | Shank Diameter d | |
Nominal M | |||||||||
C-SC-TSDR | 3 | 2.20 ~2.99 | 5 ~ 13 | 4 | 50 | ℓ+8 | ℓ+ℓ1 | 4 | |
4 | 3.00 ~3.89 | 5 ~ 18 | 6 | 59 | ℓ+13 | 6 | |||
5 | 3.90 ~4.69 | 8 ~ 23 | 60 | 8 | 61 | ℓ+16 | 8 | ||
6 | 4.70 ~6.49 | 10 ~ 28 | 90 | 8 | 62 | ℓ+18 | 8 | ||
8 | 6.50 ~8.19 | 15 ~ 35 | 120 | 10 | 69 | ℓ+24 | 10 | ||
10 | 8.20 ~9.99 | 15 ~ 45 | 12 | 77 | ℓ+30 | 12 | |||
12 | 10.00 ~ 11.00 | 20 ~ 50 | 14 | 86 | ℓ+36 | 14 |
Additional Processing Details | Code | Details |
TS Coating | TS | With TS Coating |
TiAℓN Coat | TA | TiAℓN with Coating |
work material | General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminium / Kupfer | Tool Material Type | Carbid | Shank Type | Straight Shank |
---|---|---|---|---|---|
Coating Y/N | None | With/without Oil Hole | None | Point Angle(°) | 140 |
Thinning | Included | Diameter Tolerance | h8 |
Konfigurieren
Basiseigenschaften
M Model(M)
Chamfer Angle (Double Angle θ)(°)
Stepped Length (ℓ)(mm)
Tip Diameter (D)(mm)
Ausführung
Filtern nach vsl. Lieferzeit
Optionale Eigenschaften