Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
VAC-PEM2LB1.2-6
XAL Series | VAC Series | |
---|---|---|
Micro Granules (MG) | Super-Micro Granules (SMG) | |
CO (%) Cobalt Content | 10 | 12 |
WC (%) Tungsten Carbide Content | 90 | 88 |
Tungsten Granule Diameter (μ) | 0.8 | 0.5 |
Hardness (HRA) | 91.3 | 92.3 |
![]() | ![]() |
Contributes to Improved Blade Accuracy / Quality
Teilenummer
|
---|
VAC-PEM2LB1.2-6 |
Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Figure | |
---|---|---|---|---|---|---|---|---|---|---|
25.91 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 6 | 1 |
Loading...
Flute Diameter D | Length Under Neck ℓ1 | Blade Length ℓ | Overall Length L | Shank Diameter d | Actual Effective Length Depends on Work Inclination Angle | Figure | ||||
0.5° | 1° | 1.5° | 2° | 3° | ||||||
0.2 | 0.5 | 0.3 | 40 | 4 | 0.62 | 0.65 | 0.69 | 0.73 | 0.83 | 1 |
1 | 1.14 | 1.20 | 1.27 | 1.35 | 1.54 | 1 | ||||
0.3 | 1 | 0.5 | 40 | 4 | 1.14 | 1.20 | 1.27 | 1.35 | 1.54 | 1 |
2 | 2.19 | 2.31 | 2.45 | 2.60 | 2.97 | 1 | ||||
3 | 3.25 | 3.42 | 3.62 | 3.85 | 4.39 | 1 | ||||
0.4 | 1 | 0.6 | 40 | 4 | 1.14 | 1.20 | 1.27 | 1.35 | 1.54 | 1 |
2 | 2.19 | 2.31 | 2.45 | 2.60 | 2.97 | 1 | ||||
3 | 3.25 | 3.42 | 3.62 | 3.85 | 4.39 | 1 | ||||
4 | 4.30 | 4.53 | 4.80 | 5.09 | 5.81 | 1 | ||||
0.5 | 2 | 0.7 | 45 | 4 | 2.25 | 2.38 | 2.52 | 2.67 | 3.05 | 1 |
3 | 3.31 | 3.49 | 3.69 | 3.92 | 4.47 | 1 | ||||
4 | 4.36 | 4.60 | 4.86 | 5.16 | 5.89 | 1 | ||||
5 | 5.41 | 5.71 | 6.04 | 6.41 | 7.32 | 1 | ||||
6 | 6.46 | 6.82 | 7.21 | 7.66 | 8.74 | 1 | ||||
0.6 | 2 | 0.9 | 45 | 4 | 2.25 | 2.38 | 2.52 | 2.67 | 3.05 | 1 |
3 | 3.31 | 3.49 | 3.69 | 3.92 | 4.47 | 1 | ||||
4 | 4.36 | 4.60 | 4.86 | 5.16 | 5.89 | 1 | ||||
5 | 5.41 | 5.71 | 6.04 | 6.41 | 7.32 | 1 | ||||
6 | 6.46 | 6.82 | 7.21 | 7.66 | 8.74 | 1 | ||||
8 | 8.57 | 9.04 | 9.56 | 10.15 | 11.41 | 1 | ||||
0.7 | 4 | 1.2 | 45 | 4 | 4.36 | 4.60 | 4.86 | 5.16 | 5.89 | 1 |
0.8 | 2 | 1.2 | 45 | 4 | 2.25 | 2.38 | 2.52 | 2.67 | 3.05 | 1 |
3 | 3.31 | 3.49 | 3.69 | 3.92 | 4.47 | 1 | ||||
4 | 4.36 | 4.60 | 4.86 | 5.16 | 5.89 | 1 | ||||
6 | 6.46 | 6.82 | 7.21 | 7.66 | 8.74 | 1 | ||||
8 | 8.57 | 9.04 | 9.56 | 10.15 | 11.29 | 1 | ||||
10 | 10.67 | 11.26 | 11.91 | 12.65 | 13.63 | 1 | ||||
1 | 2 | 1.5 | 50 | 4 | 2.25 | 2.38 | 2.52 | 2.67 | 3.05 | 1 |
3 | 3.31 | 3.49 | 3.69 | 3.92 | 4.47 | 1 | ||||
4 | 4.36 | 4.60 | 4.86 | 5.16 | 5.89 | 1 | ||||
5 | 5.41 | 5.71 | 6.04 | 6.41 | 7.32 | 1 | ||||
6 | 6.46 | 6.82 | 7.21 | 7.66 | 8.74 | 1 | ||||
8 | 8.57 | 9.04 | 9.56 | 10.15 | 11.18 | 1 | ||||
10 | 10.67 | 11.26 | 11.91 | 12.65 | 13.52 | 1 | ||||
12 | 12.77 | 13.48 | 14.26 | 15.01 | 15.85 | 1 | ||||
16 | 16.98 | 17.92 | 18.93 | 19.43 | 20.53 | 1 |
Flute Diameter D | Length Under Neck | Flute Length ℓ | Overall Length L | Shank Diameter d | Actual Effective Length Depends on Work Inclination Angle | Figure | ||||
0.5° | 1° | 1.5° | 2° | 3° | ||||||
1.2 | 6 | 1.8 | 50 | 4 | 6.46 | 6.82 | 7.21 | 7.66 | 8.73 | 1 |
8 | 8.57 | 9.04 | 9.56 | 10.15 | 11.06 | 1 | ||||
10 | 10.67 | 11.26 | 11.91 | 12.65 | 13.40 | 1 | ||||
12 | 12.77 | 13.48 | 14.26 | 14.90 | 15.74 | 1 | ||||
1.5 | 4 | 2.3 | 50 | 4 | 4.36 | 4.60 | 4.86 | 5.16 | 5.89 | 1 |
6 | 6.46 | 6.82 | 7.21 | 7.66 | 8.56 | 1 | ||||
8 | 8.57 | 9.04 | 9.56 | 10.15 | 10.89 | 1 | ||||
10 | 10.67 | 11.26 | 11.91 | 12.53 | 13.23 | 1 | ||||
12 | 12.77 | 13.48 | 14.26 | 14.74 | 15.57 | 1 | ||||
14 | 14.88 | 15.70 | 16.51 | 16.95 | 17.90 | 1 | ||||
16 | 16.98 | 17.92 | 18.67 | 19.16 | 20.24 | 1 | ||||
2 | 6 | 3 | 50 | 4 | 6.46 | 6.82 | 7.21 | 7.66 | 8.27 | 1 |
8 | 8.57 | 9.04 | 9.56 | 10.04 | 10.60 | 1 | ||||
10 | 10.67 | 11.26 | 11.91 | 12.25 | 12.94 | 1 | ||||
12 | 12.77 | 13.48 | 14.09 | 14.47 | 15.28 | 1 | ||||
14 | 14.88 | 15.70 | 16.25 | 16.68 | 17.61 | 1 | ||||
16 | 16.98 | 17.92 | 18.40 | 18.89 | 19.95 | 1 | ||||
20 | 21.19 | 22.14 | 22.71 | 23.31 | 24.62 | 1 | ||||
30 | 70 | 31.71 | 32.64 | 33.49 | 34.38 | 36.31 | 1 | |||
3 | 8 | 4.5 | 50 | 6 | 8.86 | 9.35 | 9.89 | 10.51 | 11.40 | 1 |
10 | 10.97 | 11.57 | 12.24 | 13.00 | 13.73 | 1 | ||||
12 | 13.07 | 13.79 | 14.59 | 15.22 | 16.07 | 1 | ||||
14 | 60 | 15.18 | 16.01 | 16.94 | 17.43 | 18.41 | 1 | |||
16 | 17.28 | 18.23 | 19.13 | 19.64 | 20.74 | 1 | ||||
20 | 21.49 | 22.67 | 23.44 | 24.07 | 25.42 | 1 | ||||
26 | 65 | 27.80 | 29.15 | 29.91 | 30.70 | 32.43 | 1 | |||
4 | 12 | 6 | 50 | 6 | 13.07 | 13.79 | 14.29 | 14.67 | 15.50 | 1 |
16 | 60 | 17.28 | 18.13 | 18.60 | 19.10 | 20.17 | 1 | |||
20 | 21.49 | 22.34 | 22.91 | 23.52 | 24.84 | 1 | ||||
26 | 65 | 27.80 | 28.64 | 29.38 | 30.16 | 31.85 | 1 | |||
30 | 70 | 32.01 | 32.84 | 33.69 | 34.58 | 36.52 | 1 | |||
6 | 15 | 9 | 60 | 6 | 15.66 | 16.05 | 16.46 | 16.90 | 17.85 | 2 |
20 | 20.78 | 21.30 | 21.85 | 22.43 | 23.69 | 2 | ||||
30 | 70 | 31.02 | 31.81 | 32.63 | 33.49 | 35.37 | 2 | |||
32 | 90 | 33.07 | 33.91 | 34.78 | 35.71 | 37.71 | 2 | |||
8 | 25 | 12 | 70 | 8 | 26.19 | 26.85 | 27.54 | 28.27 | 29.86 | 2 |
30 | 80 | 31.31 | 32.10 | 32.93 | 33.80 | 35.70 | 2 | |||
42 | 100 | 43.61 | 44.70 | 45.86 | 47.08 | 49.72 | 2 | |||
10 | 30 | 15 | 75 | 10 | 31.31 | 32.10 | 32.93 | 33.80 | 35.70 | 2 |
35 | 80 | 36.43 | 37.35 | 38.32 | 39.33 | 41.54 | 2 | |||
45 | 100 | 46.68 | 47.85 | 49.09 | 50.39 | 53.22 | 2 | |||
12 | 35 | 20 | 80 | 12 | 36.43 | 37.35 | 38.32 | 39.33 | 41.54 | 2 |
40 | 90 | 41.56 | 42.60 | 43.70 | 44.86 | 47.38 | 2 | |||
50 | 110 | 51.80 | 53.11 | 54.48 | 55.93 | 59.06 | 2 |
Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Long Neck Square |
---|---|---|---|---|---|
Processing Applications | Flat Surface / Side Surface / Nut / Thrust (Z-Feed) / Inclined Cutting / Countersunk |
Sie befinden sich auf der Seite für VAC Series Carbide 2-Flute Long Neck Square End Mill, die Teilenummer ist VAC-PEM2LB1.2-6.
Sie finden detaillierte Informationen über Spezifikation und Dimensionierung unter der Teilenummer VAC-PEM2LB1.2-6.
Konfigurieren
Basiseigenschaften
Ausführung
Outer Diameter (D)(φ)
Flute Length (ℓ)(mm)
Shank Diameter (d)(mm)
Overall Length (L)(mm)
Length Under Neck (ℓ1)(mm)
Filtern nach vsl. Lieferzeit
Optionale Eigenschaften
Teilenummer |
---|
VAC-PEM2LB0.3-2 |
VAC-PEM2LB0.3-3 |
VAC-PEM2LB0.4-1 |
VAC-PEM2LB1.2-8 |
VAC-PEM2LB1.5-10 |
VAC-PEM2LB1.5-12 |
Teilenummer | Standard-Stückpreis | Mindestbestellmenge | Mengenrabatt | Reguläre Versanddauer ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Figure |
---|---|---|---|---|---|---|---|---|---|---|
48.92 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.5 | 4 | 40 | 2 | 1 | |
50.88 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.5 | 4 | 40 | 3 | 1 | |
31.50 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 40 | 1 | 1 | |
25.91 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 8 | 1 | |
25.91 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 10 | 1 | |
25.91 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 12 | 1 |