Teilenummer
|
---|
EMS1030T |
EMS1030TL |
EMS1045T |
EMS1045TL |
Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Tip angle (θ) | Maximum Blade Diameter (D) (mm) | Minimum Machining Diameter Ds (mm) | Overall Length L (mm) | ℓs (mm) | S (mm) | Capacity (Countersink Chamfering) (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|
116.75 € | 1 | 9 Arbeitstage | 120 | 12.3 | 0.71 | 95 | 80 | 3.3 | 1.0~11.7 | ||
154.63 € | 1 | 9 Arbeitstage | 120 | 12.3 | 0.71 | 155 | 140 | 3.3 | 1.0~11.7 | ||
105.34 € | 1 | 8 Arbeitstage | 90 | 10.3 | 0.88 | 95 | 80 | 4.7 | 1.2~9.7 | ||
128.11 € | 1 | 9 Arbeitstage | 90 | 10.3 | 0.88 | 155 | 140 | 4.7 | 1.2~9.7 |
Loading...
Application | Zentrierung (Positionierung) / Anfasen/horizontal | work material | Stahl allgemein / Edelstahl / Gusseisen | Single blade, two blades | Einzelklinge |
---|---|---|---|---|---|
Peripheral Blade Y/N | N/A | Coating Y/N | N/A | Coating Type | Ohne Beschichtung |
Number of flutes | 1 | φd(mm) | 10 | ℓn(mm) | 15 |
Compatible Tip | TXMT080206 | Attached Component (Clamp Screw) | L-18 | Attached Component (Wrench) | N-4 |
Konfigurieren
Basiseigenschaften
Tip angle (θ)
Maximum Blade Diameter (D)(mm)
Minimum Machining Diameter Ds(mm)
Overall Length L(mm)
ℓs(mm)
S(mm)
Capacity (Countersink Chamfering)(mm)
Ausführung
Filtern nach vsl. Lieferzeit
Optionale Eigenschaften