WMH Keil-Fräserhalter
· Lightly tightening the clamp screw alone makes the wedge work powerfully on the flat part of the end mill, tightly locking the end mill
· The wedge tightening system guarantees maximum rigidity and accuracy
· No Sliding or Dropping Out for Extra Heavy Cutting
· No hammer is required for tightening and loosening (only light tightening is required, as cutting force will automatically tighten the endmill)
· The wedge tightens the flat section of the end mill, with gripping force several times higher than the side lock holder
Teilenummer
|
|---|
| BT40-WMH10-60 |
| BT40-WMH12-60 |
| BT40-WMH16-60 |
| BT40-WMH20-60 |
| BT40-WMH25-90 |
| BT40-WMH32-105 |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | φd (mm) | D (mm) | L (mm) | |
|---|---|---|---|---|---|---|---|
353.85 € | 1 | 10 Arbeitstage | 10 | 36 | 60 | ||
353.85 € | 1 | 10 Arbeitstage | 12 | 42 | 60 | ||
353.85 € | 1 | 10 Arbeitstage | 16 | 48 | 60 | ||
353.85 € | 1 | 10 Arbeitstage | 20 | 55 | 60 | ||
374.84 € | 1 | 10 Arbeitstage | 25 | 63 | 90 | ||
374.84 € | 1 | 10 Arbeitstage | 32 | 72 | 105 |
Loading...
Grundlegende Informationen
| Product Category | Grundkörper | Applicable Manufacturing Machinery (main unit) | Bearbeitungszentren | Spindle types | BT40 |
|---|---|---|---|---|---|
| Tool Type | Schaftfräser / Hahn | Product Type | BT40 | Features | Lightly tightening the clamp screw makes the wedge work powerfully on the flat part of the end mill, tightly locking the end mill. The wedge tightening system guarantees maximum rigidity and accuracy. Does not slip or fall off even in super heavy cutting. Hammer is not required for tightening or loosening. (Simply tighten it lightly, and the cutting force will automatically tighten the end mill. The wedge tightens the flat section of the end mill, and gripping force is several times higher than the side lock holder. |
Konfigurieren
Basiseigenschaften
-
φd(mm)
- 10
- 12
- 16
- 20
- 25
- 32
-
D(mm)
-
L(mm)
-
Ausführung
- BT40-WMH
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 10 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.