SA-Serie HA-M-OHC Gewindeschneider (Teilenummern)
· HA-M type that supports center through coolant
· Characteristics and specifications conform to the HA-M type
· The flange through oil hole type (-OHF) is available upon order
· Unlike the spring collet, tap attachment and detachment can be performed in a single action
· Remeasurement of tool length after tap replacement is unnecessary
· The standard specification uses the TC-MO with feed pump pressures up to 2 MPa.
· Use the TC-MO-SB to handle feed pump pressures up to 5 MPa.
· Also Supports Mist Specifications
Teilenummer
|
|---|
| BT30-HA412-M-OHC |
| BT40-HA1022-M-OHC |
| BT40-HA412-M-OHC |
| BT50-HA1022-M-OHC |
| BT50-HA2035-M-OHC |
| BT50-HA412-M-OHC |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Spindle types | Holder Length L (mm) | C1 (mm) | Capacity Range | Mass (g) | L1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
307.33 € | 1 | 8 Arbeitstage | BT30 | 105 | 35 | M3～M16 | 530 | 61.5 | ||
345.28 € | 1 | 8 Arbeitstage | BT40 | 150 | 50 | M8～M27 | 1460 | 85 | ||
311.96 € | 1 | 8 Arbeitstage | BT40 | 120 | 35 | M3～M16 | 1190 | 76.5 | ||
473.68 € | 1 | 8 Arbeitstage | BT50 | 165 | 50 | M8～M27 | 4100 | 100.0 | ||
537.37 € | 1 | 8 Arbeitstage | BT50 | 210 | 72 | M18～M38 | 4920 | 125.0 | ||
349.71 € | 1 | 8 Arbeitstage | BT50 | 135 | 35 | M3～M16 | 3730 | 91.5 |
Loading...
Grundlegende Informationen
| Product Category | Grundkörper | Applicable Manufacturing Machinery (main unit) | Bearbeitungszentren | Features | HA-M Type supporting center coolant-through. Specifications and characteristics accord with HA-M Type. Special flange-through oil hole type (-OHF) can be specially made to order. Unlike spring collet, tap attachment and detachment can be performed in single action. No tool length re-measurement after tap replacement necessary. Uses TC-MO Type with 2 MPa supply pump pressure as standard. Use of TC-MO-SB Type supports maximum supply pump pressure of 5 MPa. Can support mist specification. |
|---|
Konfigurieren
Basiseigenschaften
-
Spindle types
- BT30
- BT40
- BT50
-
Holder Length L(mm)
-
C1(mm)
-
Capacity Range
- M3～M16
- M8～M27
- M18～M38
-
Ausführung
- HA-M-OHC
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.