Coated Arc Welding Rod (for Soft Steel and 490-550 MPa Grade High-Tension Steel) L-55【4 Stk. pro Packung】
Teilenummer
|
|---|
| NSSW-L-55-3.2-20 |
| NSSW-L-55-4-20 |
| NSSW-L-55-5-20 |
| Teilenummer |
Standard-Stückpreis
| Anzahl Stk. im Paket | Mindestbestellmenge | Mengenrabatt | Pole diameter (mm) | Pole length (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | |
|---|---|---|---|---|---|---|---|---|---|
177.46 € | 4 Stk. pro Packung | 1 Packung | Verfügbar | 9 Arbeitstage | 3.2 | 400 | 70~140 | 60～130/60～130 | |
168.55 € | 4 Stk. pro Packung | 1 Packung | Verfügbar | 8 Arbeitstage | 4 | 450 | 120～190 | 90～150/90～150 | |
165.08 € | 4 Stk. pro Packung | 1 Packung | Verfügbar | 8 Arbeitstage | 5 | 450 | 190~240 | 130～170/130～170 |
Loading...
Grundlegende Informationen
| Product Type | Schweißstab | Tensile Strength(Mpa) | 550 | Stretch(%) | 30 |
|---|---|---|---|---|---|
| Yield Stress(Mpa) | 480 | Absorbed energy((0℃)J) | 160（-30℃）J | Amount Of Content | 1 Box (5 kg x 4 Cases) |
| Mass(g) | 5000 | Features | A low hydrogen system all position welding rod for 490 MPa grade high tensile strength steel. Excellent crack resistance for welded metal, good mechanical properties and X-ray performance. In particular, the upright, upward posture is also very easy to use. A representative brand for traditional low hydrogen type welding rods. | Application | Welding of 490 MPa class high tensile steel (SM490, SM490Y, SM520, etc.) used in important structures for shipbuilding, construction, bridge building, and pressure vessels, etc. |
| Main Points for Welding Construction | Dry the welding rod for about 60 minutes at 300 to 350°C before use. To prevent the formation of blow holes or pits, use a backstepping rod during arc generation. Also, keep the arc length as short as possible during welding. Water droplets, rust, oils and fats inside the groove may cause cracks or blow holes, so thoroughly remove them. | Example of Deposited Metal Chemical Composition C(%) | 0.07 | Si(%) | 0.62 |
| Mn(%) | 1.18 | P(%) | 0.011 | S(%) | 0.008 |
| JIS Standard | Z 3211 E4916U | AWS Standard | A5.1 E7016 Applicable | Pole end color | Light Green |
| Rod Side Color | Yellow | Specifications | Low hydrogen system for all positions, 490 MPa grade high tensile strength steel. |
Konfigurieren
Basiseigenschaften
-
Pole diameter(mm)
-
Pole length(mm)
-
Current range, lower(A)
-
Current range, vertical position, elevating, upper
-
Ausführung
- NSSW-L-55
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 8 Tage oder weniger
- 9 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.