Welding Wire for Stainless Steel WEL FCW 309LT
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
WEL-FCW-309LT-0.9-12.5
Teilenummer
|
|---|
| WEL-FCW-309LT-0.9-12.5 |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Wire Diameter (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | Arc Voltage Down Facing (V) | Arc Voltage Vertical Up Facing (V) | |
|---|---|---|---|---|---|---|---|---|---|
560.48 € | 1 | 8 Arbeitstage | 0.9 | 120～130 | 60~80 | 26～29/24～27 | 21～24/20～23 |
Loading...
Grundlegende Informationen
| Product Type | Schweißdraht | Amount Of Content | 1 Box (12.5 kg) | Features | As WEL FCW 309T, WEL FCW 309LT is suitable for welding of 13Cr, 18Cr steel and SUS309S. With carbon content as low as 0.04% or less, is ideal for underlaying low carbon stainless-clad steel and lining weld. Low crack sensitivity is effective for welding at easy-to-crack points. |
|---|---|---|---|---|---|
| Application | Differing Material Fitting, for Overlay Welding | Shield Gas Flow Rate(l/min) | 20 | Extension(mm) | 15~25 |
| (JIS) Equivalent standard | TS309L-FB0 | (AWS) Equivalent standard | E309LT0-1/4 | Chemical components C(%) | 0.022 |
| Chemical components Si(%) | 0.72 | Chemical components Cu(%) | 0.08 | Chemical components Mn(%) | 1.27 |
| Chemical components P(%) | 0.023 | Chemical components S(%) | 0.006 | Chemical components Ni(%) | 13.02 |
| Chemical components Cr(%) | 24.10 | Chemical components Mo(%) | 0.04 | Mechanical property (tensile strength)(Mpa) | 541 |
| Mechanical property (elongation)(%) | 37.2 | Mechanical property (0.2% yield stress)(Mpa) | 434 | Shield Gas | 100%CO2/80%Ar+20%CO2 |
| Mass(g) | 12500 |
Konfigurieren
Basiseigenschaften
-
Wire Diameter(mm)
-
Current range, lower(A)
-
Arc Voltage Down Facing(V)
- 26～29/24～27
- 30～32/28～30
-
Arc Voltage Vertical Up Facing(V)
- 21～24/20～23
- 22～24/21～23
- -
-
Ausführung
- WEL FCW 309LT
-
Current range, vertical position, elevating, upper
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.