BT30 Super G1 Bohrfutter
Teilenummer
|
|---|
| BT30-SGC8-45 |
| BT30-SGC8-45P1 |
| BT30-SGC8-45P2 |
| BT30-SGC8-75 |
| BT30-SGC8-75P1 |
| BT30-SGC8-75P2 |
| BT30-SGC8-105 |
| BT30-SGC8-105P1 |
| BT30-SGC8-105P2 |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Retainable blade diameter (mm) | Holder Length L (mm) | Nut Outer Diameter D (mm) | Full length L1 (mm) | Mass (g) | Supported collets | Supported wrenches | Included pull-stud bolt | Length adjustment screw | Length adjustable screw g (mm) | Length adjustment screw ℓ max (mm) | Coolant Seal Screw | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
218.69 € | 1 | 6 Arbeitstage | 1.0～8.0 | 45 | 26 | 93.4 | 500 | SG8 | FS26 | NA | APM8-2 | M10 x 1.5 | 40 | CSE8/CSH8 | ||
237.35 € | 1 | 6 Arbeitstage | 1.0～8.0 | 45 | 26 | 93.4 | 500 | SG8 | FS26 | P1 | APM8-2 | M10 x 1.5 | 40 | CSE8/CSH8 | ||
243.18 € | 1 | 6 Arbeitstage | 1.0～8.0 | 45 | 26 | 93.4 | 500 | SG8 | FS26 | P2 | APM8-2 | M10 x 1.5 | 40 | CSE8/CSH8 | ||
232.46 € | 1 | 10 Arbeitstage | 1.0～8.0 | 75 | 26 | 123.4 | 600 | SG8 | FS26 | NA | APM8-2 | M10 x 1.5 | 40 | CSE8/CSH8 | ||
250.80 € | 1 | 6 Arbeitstage | 1.0～8.0 | 75 | 26 | 123.4 | 600 | SG8 | FS26 | P1 | APM8-2 | M10 x 1.5 | 40 | CSE8/CSH8 | ||
250.80 € | 1 | 6 Arbeitstage | 1.0～8.0 | 75 | 26 | 123.4 | 600 | SG8 | FS26 | P2 | APM8-2 | M10 x 1.5 | 40 | CSE8/CSH8 | ||
246.25 € | 1 | 6 Arbeitstage | 1.0～8.0 | 105 | 26 | 153.4 | 700 | SG8 | FS26 | NA | APM8-2 | M10 x 1.5 | 40 | CSE8/CSH8 | ||
264.25 € | 1 | 6 Arbeitstage | 1.0～8.0 | 105 | 26 | 153.4 | 700 | SG8 | FS26 | P1 | APM8-2 | M10 x 1.5 | 40 | CSE8/CSH8 | ||
264.25 € | 1 | 6 Arbeitstage | 1.0～8.0 | 105 | 26 | 153.4 | 700 | SG8 | FS26 | P2 | APM8-2 | M10 x 1.5 | 40 | CSE8/CSH8 |
Loading...
Grundlegende Informationen
| Product Category | Grundkörper | Applicable Manufacturing Machinery (main unit) | Bearbeitungszentren | Spindle types | BT30 |
|---|---|---|---|---|---|
| Taper(mm) | BT30 7/24 |
Konfigurieren
Basiseigenschaften
-
Holder Length L(mm)
-
Nut Outer Diameter D(mm)
-
Full length L1(mm)
-
Mass(g)
-
Supported collets
- SG6
- SG8
- SG10
- SG12
- SG16
- SG20
-
Supported wrenches
-
Included pull-stud bolt
- P1
- P2
- NA
-
Ausführung
- SGC
-
Retainable blade diameter(mm)
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 6 Tage oder weniger
- 8 Tage oder weniger
- 10 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.