Combat Z Bohreridentifikations-Spitze
[Features]
· An insert chip for Combat Z Drills.
· It has a diamond shape at 86° and 2 corners each diagonally on the outer and inner circumferences, allowing a total of 4 corners to be used.
· An insert chip for Combat Z Drills.
· It has a diamond shape at 86° and 2 corners each diagonally on the outer and inner circumferences, allowing a total of 4 corners to be used.
Teilenummer
|
|---|
| 9CMT6 |
| 9CMT7 |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Hole diameter (drill diameter) D (mm) | Applicable Drill | Inscribed Circle (φ) (mm) | Thickness (mm) | Nose R (mm) | |
|---|---|---|---|---|---|---|---|---|---|
22.22 € | 10 | 7 Arbeitstage | 2.8 | COMZ21～26／COMZ43～55 | 6.35 | 2.38 | 0.4 | ||
17.23 € | 10 | 5 Arbeitstage | 3.4 | COMZ26.5～35／COMZ56～65 | 7.94 | 3.18 | 0.8 |
Loading...
Grundlegende Informationen
| work material | Stahl allgemein / Gusseisen | Coating Y/N | Verfügbar | Material | Coating (PR630) |
|---|---|---|---|---|---|
| Details | The insert tip is not square, but 86° diamond shaped. It can be used diagonally in a total of 4 corners: 2 corners on the outer circumference, and 2 corners in the inner circumference. | Notes | Be careful when mounting the insert tip |
Konfigurieren
Basiseigenschaften
-
Hole diameter (drill diameter) D(mm)
-
Ausführung
- 9CMT6
- 9CMT7
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.