Drehmomentschlüssel mit Voreinstellung
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
[Features]
· The torque value to be measured can be set in advance, so it is effective when working continuously or when it is difficult to read the scale.
· It has a lock mechanism for setting measurement values.
· Can be used for measurement of left torque as well as right torque.
· The head width is short, and can be used in places that could not be reached before.
· A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and maintaining high accuracy.
[Applications]
· For general tightening tasks.
· The torque value to be measured can be set in advance, so it is effective when working continuously or when it is difficult to read the scale.
· It has a lock mechanism for setting measurement values.
· Can be used for measurement of left torque as well as right torque.
· The head width is short, and can be used in places that could not be reached before.
· A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and maintaining high accuracy.
[Applications]
· For general tightening tasks.
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
CMPB8006
Grundlegende Informationen
| Product Type | Vorgegebene Form | Torque adjustment range(N·m) | 150～800 | Insertion Angle(mm) | 19 |
|---|---|---|---|---|---|
| Minimum graduation(N·m) | 5 | Overall Length(mm) | 1050 | Torque Precision(±%) | 4 |
| Main body: option | Main Body | Trusco Code | 410-6067 | Mass(g) | 5800 |
| Features | The torque value to be measured can be pre-set in advance, and this is especially effective for use when work is continuous, and when gradations are difficult to read. A locking function after the measuring value has been set is included. Measuring action not only on the right torque but also on the left torque is enabled. As the head width is narrow, this can also be used to measure areas where no other devices in the past could measure. A rubber ring is attached on the bottom of the head part which increases the degree of sealing, reducing the incidence of failure and keeping high accuracy. | Application | For general tightening tasks. | Load direction | Left/ right |
Sie befinden sich auf der Seite für Drehmomentschlüssel mit Voreinstellung, die Teilenummer ist CMPB8006.
Sie finden detaillierte Informationen über Spezifikation und Dimensionierung unter der Teilenummer CMPB8006.
Konfigurieren
Basiseigenschaften
-
Ausführung
- CMPB
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 6 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.