CoroCut 1 / 2 Einstech- und Nutenbohrer
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Groove Width (mm) | Maximum Groove Depth (mm) | Selfishly | Shank height (mm) | Sheet size | Dimension H1 (mm) | Dimension L1 (mm) | Dimension L3 (mm) | Dimensions dch (mm) | Gauge Chip | Tip tightening torque (Nm) | Minimum Machining Diameter (mm) | Dimensions d mm (mm) | Dimensions/f1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
354.01 € | 1 | 6 Arbeitstage | 2 | 9.5 | Linke Hand | 30 | E | 15 | 250 | 45 | 9 | N123E2-0200-GM | 4 | 40 | 32 | 25.5 | ||
354.01 € | 1 | 6 Arbeitstage | 3 | 9 | Linke Hand | 30 | G | 15 | 250 | 45 | 9 | N123G2-0300-GM | 4.5 | 40 | 32 | 25.25 | ||
445.42 € | 1 | 6 Arbeitstage | 3 | 11 | Linke Hand | 37 | G | 18.5 | 300 | 55 | 12 | N123G2-0300-GM | 4.5 | 50 | 40 | 31 | ||
354.01 € | 1 | 6 Arbeitstage | 4 | 10 | Linke Hand | 30 | H | 15 | 250 | 45 | 9 | N123H2-0400-GM | 4.5 | 40 | 32 | 26.5 | ||
445.42 € | 1 | 6 Arbeitstage | 4 | 11 | Linke Hand | 37 | H | 18.5 | 300 | 55 | 12 | N123H2-0400-GM | 5 | 50 | 40 | 31 | ||
501.39 € | 1 | 6 Arbeitstage | 4 | 13 | Linke Hand | 47 | H | 23.5 | 350 | 65 | 12 | N123H2-0400-GM | 5 | 60 | 50 | 38.25 | ||
354.01 € | 1 | 6 Arbeitstage | 5 | 11 | Linke Hand | 30 | J | 15 | 250 | 45 | 9 | N123J2-0500-GM | 5 | 40 | 32 | 27 | ||
626.43 € | 1 | 6 Arbeitstage | 5 | 11 | Linke Hand | 37 | J | 18.5 | 300 | 55 | 12 | N123J2-0500-GM | 5.5 | 50 | 40 | 31 | ||
705.24 € | 1 | 6 Arbeitstage | 5 | 13 | Linke Hand | 47 | J | 23.5 | 350 | 65 | 12 | N123J2-0500-GM | 5.5 | 60 | 50 | 38.25 | ||
705.24 € | 1 | 6 Arbeitstage | 6 | 13 | Linke Hand | 47 | K | 23.5 | 350 | 65 | 12 | N123K2-0600-GM | 5.5 | 60 | 50 | 38.25 | ||
354.01 € | 1 | 6 Arbeitstage | 4 | 10 | Rechte Hand | 30 | H | 15 | 250 | 45 | 9 | N123H2-0400- GM | 4.5 | 40 | 32 | 26.5 | ||
445.42 € | 1 | 6 Arbeitstage | 4 | 11 | Rechte Hand | 37 | H | 18.5 | 300 | 55 | 12 | N123H2-0400- GM | 5 | 50 | 40 | 31 | ||
445.42 € | 1 | 6 Arbeitstage | 5 | 11 | Rechte Hand | 37 | J | 18.5 | 300 | 55 | 12 | N123J2-0500- GM | 5.5 | 50 | 40 | 31 | ||
501.39 € | 1 | 6 Arbeitstage | 5 | 13 | Rechte Hand | 47 | J | 23.5 | 350 | 65 | 12 | N123J2-0500- GM | 5.5 | 60 | 50 | 38.25 | ||
445.42 € | 1 | 6 Arbeitstage | 6 | 11 | Rechte Hand | 37 | K | 18.5 | 300 | 55 | 12 | N123K2-0600-GM | 5.5 | 50 | 40 | 31 | ||
501.39 € | 1 | 6 Arbeitstage | 6 | 13 | Rechte Hand | 47 | K | 23.5 | 350 | 65 | 12 | N123K2-0600-GM | 5.5 | 60 | 50 | 38.25 |
Loading...
Grundlegende Informationen
| Application | Innendurchmesser Nutenfräsen / Profilierung | Number of corners for tip use | 2 Ecken | Clamp System | Screw Clamp |
|---|---|---|---|---|---|
| Specifications | Boring Bit, Cylindrical Flat Attachment, All With Oil Holes |
Konfigurieren
Basiseigenschaften
-
Groove Width(mm)
-
Maximum Groove Depth(mm)
-
Selfishly
- Rechte Hand
- Linke Hand
-
Shank height(mm)
-
Sheet size
-
Dimension H1(mm)
-
Dimension L1(mm)
-
Dimension L3(mm)
-
Dimensions dch(mm)
- 9
- 12
-
Gauge Chip
-
Tip tightening torque(Nm)
-
Minimum Machining Diameter(mm)
-
Ausführung
- R/LAG123
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 6 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.