Coated Rod for Soft Steel to 550 MPa Grade Steel B-17【1-4 Stk. pro Packung】
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
Teilenummer
|
|---|
| B-17-2.6-5 |
| B-17-2.6-20 |
| Teilenummer |
Standard-Stückpreis
| Anzahl Stk. im Paket | Mindestbestellmenge | Mengenrabatt | Pole diameter (mm) | Pole length (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | Amount Of Content | Mass (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
71.49 € | 1 | 5 Arbeitstage | 2.6 | 350 | 50~85 | 40–70 | 1 Case (5 kg) | 5000 | |||
197.76 € | 4 Stk. pro Packung | 1 Packung | 8 Arbeitstage | 2.6 | 350 | 50~85 | 40–70 | 1 Box (5 kg x 4 Cases) | 20000 |
Loading...
Grundlegende Informationen
| Product Type | Schweißstab | JIS Standard | Z3211 E4319 | AWS Standard | A5.1 E6019 Applicable |
|---|---|---|---|---|---|
| Compatible Material Type | For all positions | Application and Usage Characteristic | Structural welding for shipbuilding, construction and machinery, etc. Crack resistance, pit resistance, and X-ray performance are the best among similar rods. Most trusted and has been used for the longest amount of time. Provides deep penetration and excellent slag peeling; most suitable for welding of about 20 mm or less. | Main Points of Work | Excessive current reduces X-ray performance and is the reason for degradation of workability. Hence, use the appropriate current range. Due to excessive absorption of moisture, besides deterioration of workability, pits may also occur. Hence, dehydrate at 70 to 100°C for 30 to 60 minutes. Due to excessive drying (for long period or high temperature), the penetration decreases, X-ray performance deteriorates and causes burning of the bar, even though there is no apparent change in quality. For medium and thick welding, adopt appropriate preheating / inter-path temperature. |
| Chemical Composition of Deposited Metal C(%) | 0.09 | Chemical Composition of Deposited Metal Si(%) | 0.08 | Chemical Composition of Deposited Metal Mn(%) | 0.60 |
| Chemical Composition of Deposited Metal P(%) | 0.012 | Chemical Composition of Deposited Metal S(%) | 0.006 | Identification Color, Rod End Color | Yellow |
| Identification Color, Secondary Color | NA | Mechanical Properties of Weld Metal Proof Stress MPa | 420 | Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | 470 |
| Mechanical Properties of Weld Metal Proof Stress, Elongation(%) | 26 | Mechanical Properties of Weld Metal Proof Stress, Absorption Energy(J) | 110 | Authorized by the Classification Society of Japan | NK,ABS,LR,DNV,BV,CR,GL |
Konfigurieren
Basiseigenschaften
-
Pole diameter(mm)
-
Pole length(mm)
-
Current range, vertical position, elevating, upper
-
Amount Of Content
-
Mass(g)
- 5000
- 20000
-
Ausführung
- B-17
-
Current range, lower(A)
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.