Hersteller-Teilenummer: AC-7315
Marke: TEIKOKU_CHUCK
Preis: 387.75 €
Lieferzeit: 10 Arbeitstage
Holding Range: 21.75~22.00
Applicable Arbor: AC8300、AC7300-A
Collet width: 21.3
Details Type: For Light Cutting and Grinding Work Only
Note: -
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
AC-7315
Teilenummer
|
---|
AC-7315 |
Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Holding Range | Applicable Arbor | Collet width | Details Type | Note | |
---|---|---|---|---|---|---|---|---|---|
387.75 € | 1 | 10 Arbeitstage | 21.75~22.00 | AC8300、AC7300-A | 21.3 | For Light Cutting and Grinding Work Only | - |
Loading...
Sie befinden sich auf der Seite für Tork-Loc Spannzange, kurz, die Teilenummer ist AC-7315.
Sie finden detaillierte Informationen über Spezifikation und Dimensionierung unter der Teilenummer AC-7315.
Konfigurieren
Basiseigenschaften
Ausführung
Holding Range
Applicable Arbor
Collet width
Details Type
Filtern nach vsl. Lieferzeit
Optionale Eigenschaften
Teilenummer |
---|
AC-7104 |
AC-7105 |
AC-7106 |
AC-7316 |
AC-7317 |
AC-7318 |
Teilenummer | Standard-Stückpreis | Mindestbestellmenge | Mengenrabatt | Reguläre Versanddauer ? | Holding Range | Applicable Arbor | Collet width | Details Type | Note |
---|---|---|---|---|---|---|---|---|---|
387.75 € | 1 | 10 Arbeitstage | 13.50~13.74 | AC8100、AC7100-A | 15.0 | For Light Cutting and Grinding Work Only | - | ||
387.75 € | 1 | 10 Arbeitstage | 13.75~14.00 | AC8100、AC7100-A | 15.0 | For Light Cutting and Grinding Work Only | - | ||
387.75 € | 1 | 10 Arbeitstage | 14.01~14.27 | AC8100、AC7100-A | 15.0 | For Light Cutting and Grinding Work Only | - | ||
387.75 € | 1 | 10 Arbeitstage | 22.01~22.20 | AC8300、AC7300-A | 21.3 | For Light Cutting and Grinding Work Only | - | ||
387.75 € | 1 | 10 Arbeitstage | 22.21~22.45 | AC8300、AC7300-A | 21.3 | For Light Cutting and Grinding Work Only | A collet in the overlap range. If possible, use a collet one rank higher. | ||
387.75 € | 1 | 10 Arbeitstage | 22.46~22.73 | AC8300、AC7300-A | 21.3 | For Light Cutting and Grinding Work Only | A collet in the overlap range. If possible, use a collet one rank higher. |