Lieferzeit |
|
---|
?* Informationen zur Lieferzeit und Preisen
OSG
› Jetzt konfigurieren
|
|
ab∗ : | 12.82 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
OSG
› Jetzt konfigurieren
|
|
ab∗ : | 24.30 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
OSG
› Jetzt konfigurieren
|
|
ab∗ : | 20.12 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
OSG
› Jetzt konfigurieren
|
|
ab∗ : | 27.94 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
OSG
› Jetzt konfigurieren
|
|
ab∗ : | 27.53 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
OSG
› Jetzt konfigurieren
|
|
ab∗ : | 29.55 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
SANDVIK
› Jetzt konfigurieren
|
|
ab∗ : | 36.57 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
YAMAWA MFG
› Jetzt konfigurieren
|
|
ab∗ : | 65.58 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
NACHI(FUJIKOSHI)
› Jetzt konfigurieren
|
|
ab∗ : | 22.94 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
› Jetzt konfigurieren
|
|
Minimum Lieferzeit : | 5 Arbeitstage |
---|
› Jetzt konfigurieren
|
|
Minimum Lieferzeit : | 5 Arbeitstage |
---|
› Jetzt konfigurieren
|
|
ab∗ : | 179.08 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
ab∗ |
Minimum Lieferzeit |
Screw Types |
Screw size (Nominal) |
Pitch (P), Number of Threading(mm) |
Chamfer threads (Lcf) |
Tool Material Type |
work material |
Tap Type |
Hole type |
Coating Y/N |
Coating Type |
Overall Length (L)(mm) |
Warenzeichen | OSG | OSG | OSG | OSG | OSG | OSG | SANDVIK | YAMAWA MFG | NACHI(FUJIKOSHI) | SANDVIK | SANDVIK | SANDVIK |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Artikelserie | Spiralgewindebohrer, Allgemeine Verwendung (linksseites Gewinde) EX-SFT-L | Punkthahn-Serie für allgemeine Verwendung oxidierter Langer Schaft EX-LT-H-POT | Nutlose Entleerungshahnserie, X Performer langer Schaft LT-S-XPF | Gewinde runde Matrize Serie Rohr Allgemeinen Gewinde Runde Matrize RD-S | Modell A-Hahnserie, Langer Schaft Spiralgewindebohrer A-LT-SFT | Spiralgewindebohrer Klauenhahn 300 TiCN-Beschichtung (für Metallschrauben) | Feste Matrize (für linke Schraube) für D-LH-Schraube aus Metall | SANDVIK CoroMill Plura Vollhartmetall-Schaftfräser zum Gewindefräsen | ||||
ab∗ | 12.82 € *Stückpreis Standardkonfiguration Mengenrabatt | 24.30 € *Stückpreis Standardkonfiguration Mengenrabatt | 20.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 27.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 27.53 € *Stückpreis Standardkonfiguration Mengenrabatt | 29.55 € *Stückpreis Standardkonfiguration | 36.57 € *Stückpreis Standardkonfiguration Mengenrabatt | 65.58 € *Stückpreis Standardkonfiguration Mengenrabatt | 22.94 € *Stückpreis Standardkonfiguration Mengenrabatt | - | - | 179.08 € *Stückpreis Standardkonfiguration |
Minimum Lieferzeit | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | auf Anfrage |
Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
Screw size (Nominal) | M3 | M3 | M3 | M3 | M3 | M3 | M3 | M3 | M3 | M3 | M3 | M3 |
Pitch (P), Number of Threading(mm) | 0.5 | 0.5 | 0.5 | 0.5 | 0.35 ~ 0.6 | 0.35 ~ 0.5 | 0.5 | 0.5 | 0.5 | - | - | 0,5 |
Chamfer threads (Lcf) | 2.5P | 3P | 5P | - | - | 2.5P | 2P | - | 5 | - | - | - |
Tool Material Type | Vanadium HSS-Stahl | Vanadium HSS-Stahl | Vanadium HSS-Stahl | Vanadium HSS-Stahl | HSS-Legierung | Pulverisierter HSS-Stahl | - | HSS-Stahl | HSS-Stahl | - | - | - |
work material | Stahl mit mittelmäßigem Kohlenstoffanteil (Anteil zwischen 0,25 bis 0,45 %)[○] / Legierter Stahl (SCM)[○] / Leitfähiges Gusseisen (FCD)[○] / Kupfer (Cu)[○] / Messing (Bs)[○] / Messing-Gusseisen (BsC)[○] / Bronze (Pb)[○] / Aluminium-Walzwerkstoff (AL)[○] / Aluminiumgusslegierung (AC, ADC)[○] / Magnesiumlegierung (MC)[○] / Zinkgusslegierung (ZDC)[○] / Thermoplast (Vinylchlorid, Nylon etc.)[○] | Aluminium-Walzwerkstoff (AL)[○] / Aluminiumgusslegierung (AC, ADC)[◎] / Magnesiumlegierung (MC)[◎] / Zinkgusslegierung (ZDC)[◎] | Stahl mit geringem Kohlenstoffanteil (Kohlenstofflegierung weniger als 0,25 %)[◎] / Stahl mit mittelmäßigem Kohlenstoffanteil (Anteil zwischen 0,25 bis 0,45 %)[○] / Stahl mit hohem Kohlenstoffanteil (mit einem Anteil von mehr als 0,45 %)[○] / Legierter Stahl (SCM)[○] / Stahlguss (SC)[○] / Thermoplast (Vinylchlorid, Nylon etc.)[○] | Stahl mit geringem Kohlenstoffanteil (Kohlenstofflegierung weniger als 0,25 %)[◎] / Stahl mit mittelmäßigem Kohlenstoffanteil (Anteil zwischen 0,25 bis 0,45 %)[◎] / Stahl mit hohem Kohlenstoffanteil (mit einem Anteil von mehr als 0,45 %)[◎] / Legierter Stahl (SCM)[◎] / Rostfreier Stahl (JIS rostfrei)[◎] / Abgeschreckter und gehärteter Stahl (25 bis 35 HRC)[◎] / Stahlguss (SC)[○] / Kupfer (Cu)[◎] / Messing (Bs)[◎] / Messing-Gusseisen (BsC)[◎] / Aluminium-Walzwerkstoff (AL)[◎] / Aluminiumgusslegierung (AC, ADC)[◎] / Zinkgusslegierung (ZDC)[◎] | - | Stahl mit geringem Kohlenstoffanteil (Kohlenstofflegierung weniger als 0,25 %)[○] / Stahl mit mittelmäßigem Kohlenstoffanteil (Anteil zwischen 0,25 bis 0,45 %)[◎] / Stahl mit hohem Kohlenstoffanteil (mit einem Anteil von mehr als 0,45 %)[◎] / Legierter Stahl (SCM)[○] / Rostfreier Stahl (JIS rostfrei)[○] / Werkzeugstahl (vor SKD-Härtung)[○] / Stahlguss (SC)[○] / Leitfähiges Gusseisen (FCD)[○] / Kupfer (Cu)[○] / Messing (Bs)[○] / Messing-Gusseisen (BsC)[○] / Bronze (Pb)[○] / Aluminium-Walzwerkstoff (AL)[○] / Aluminiumgusslegierung (AC, ADC)[◎] / Magnesiumlegierung (MC)[○] / Zinkgusslegierung (ZDC)[○] | - | - | Stahl mit geringem Kohlenstoffanteil (Kohlenstofflegierung weniger als 0,25 %)[○] / Stahl mit mittelmäßigem Kohlenstoffanteil (Anteil zwischen 0,25 bis 0,45 %)[○] / Stahl mit hohem Kohlenstoffanteil (mit einem Anteil von mehr als 0,45 %)[○] / Legierter Stahl (SCM)[○] / Rostfreier Stahl (JIS rostfrei)[○] / Abgeschreckter und gehärteter Stahl (25 bis 35 HRC)[○] / Abgeschreckter und gehärteter Stahl (35 bis 45 HRC)[○] / Leitfähiges Gusseisen (FCD)[○] / Kupfer (Cu)[○] / Aluminium-Walzwerkstoff (AL)[○] / Aluminiumgusslegierung (AC, ADC)[○] | - | - | - |
Tap Type | Spiralgewindebohrer | Spiralgewindebohrer | Punktgewindebohrer | Rollgewindebohrer | Matrize | Spiralgewindebohrer | Spiralgewindebohrer | Matrize | Punktgewindebohrer | - | - | - |
Hole type | Für Blindloch | Für Blindloch | Für Durchgangsbohrung | Für Durchgangsbohrung / Für Blindloch | - | Für Blindloch | Für Blindloch | - | Für Durchgangsbohrung | - | - | - |
Coating Y/N | N/A | Verfügbar | N/A | Verfügbar | N/A | Verfügbar | Verfügbar | N/A | Verfügbar | - | - | - |
Coating Type | Ohne Beschichtung | Sonstige | Ohne Beschichtung | Sonstige | Ohne Beschichtung | Sonstige | TiCN | - | TiCN | - | - | - |
Overall Length (L)(mm) | 46 | 46 | 100 | 80 ~ 120 | - | 100 ~ 150 | 46 | - | 46 | 48 ~ 56 | 48 ~ 56 | 57 |
Loading...
Filtern nach:
Lagerbestand
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)
Marke
CAD Format