Lieferzeit |
|
---|
?* Informationen zur Lieferzeit und Preisen
TRUSCO NAKAYAMA
Jetzt konfigurieren
|
|
ab∗ : | 13.20 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
PB SWISS TOOLS
Jetzt konfigurieren
|
|
ab∗ : | 15.55 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Jetzt konfigurieren
|
|
ab∗ : | 8.10 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
ANEX
Jetzt konfigurieren
|
|
ab∗ : | 7.92 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
ANEX
Jetzt konfigurieren
|
|
ab∗ : | 6.35 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
ab∗ |
Minimum Lieferzeit |
Tip standards |
Tip size / Phillips (+) |
Tip size / flathead (-) blade width(mm) |
Single Product/Set Classification |
Shaft length(mm) |
Overall Length(mm) |
Tip size / flathead (-) blade thickness(mm) |
Applicable Standards |
Warenzeichen | TRUSCO NAKAYAMA | PB SWISS TOOLS | ANEX | ANEX | ANEX |
---|---|---|---|---|---|
Artikelserie | |||||
ab∗ | 13.20 € *Stückpreis Standardkonfiguration | 15.55 € *Stückpreis Standardkonfiguration | 8.10 € *Stückpreis Standardkonfiguration | 7.92 € *Stückpreis Standardkonfiguration | 6.35 € *Stückpreis Standardkonfiguration |
Minimum Lieferzeit | 9 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage |
Tip standards | Senkkopf (-) | Senkkopf (-) | Senkkopf (-) | Senkkopf (-) | Senkkopf (-) |
Tip size / Phillips (+) | - | - | - | - | - |
Tip size / flathead (-) blade width(mm) | 4 | 2 ~ 5.5 | - | 5 ~ 6 | 3 |
Single Product/Set Classification | Einzelstück | Einzelstück | Einzelstück | - | - |
Shaft length(mm) | 100 | 40 ~ 125 | 100 ~ 200 | 100 | 75 |
Overall Length(mm) | 200 | 125 ~ 230 | 183 ~ 298 | 183 ~ 198 | 183 |
Tip size / flathead (-) blade thickness(mm) | - | 0.4 ~ 1 | - | - | - |
Applicable Standards | - | Ohne | Ohne | - | - |
Loading...
Filtern nach:
Tip standards
Tip size / Phillips (+)
Tip size / flathead (-) blade width(mm)
Single Product/Set Classification
Shaft length(mm)
Overall Length(mm)
Tip size / flathead (-) blade thickness(mm)
Applicable Standards
Marke
CAD Format