KANAFLEX CORPORATION Leitungsschläuche
?* Informationen zur Lieferzeit und Preisen
-
Leitungsschlauch, Schlauch N.S.D.
KANAFLEX CORPORATION
The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.
[Features]
· The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
· Easy to carry to increase work efficiency.
· The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
· In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
· The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.Minimum Lieferzeit ： 10 Arbeitstage -
Leitungsschlauch, Schlauch EF-Ausführung, (antistatisch)
KANAFLEX CORPORATION
A special blended soft vinyl chloride provides superior anti-static. Transparent (a clear green), so you can see what is running through.Minimum Lieferzeit ： 9 Arbeitstage -
Leitungsschlauch, Schlauch EE-Ausführung,
KANAFLEX CORPORATION
[Features]
▪ Low internal resistance and high transportability.
· Easy to bend, lightweight, and work-efficient.
· Easy cutting and mounting facilitates easy piping.Minimum Lieferzeit ： 9 Arbeitstage -
Leitungsschlauch, Faltenschlauch
KANAFLEX CORPORATION
Can be extended or contracted freely and stored at a compact size 1/3 - 1/3.5 of its extended length. Has a large mouth, but is lightweight at φ200 - 2㎏/m, and can be made compact for easy transportation.Minimum Lieferzeit ： 14 Arbeitstage -
Leitungsschlauch, Harter Schlauch N.S.
KANAFLEX CORPORATION
[Features]
· PVC Product.
· Excellent heat resistance.
· Structure has less bends due to temperature change.
· Flexible bendable hose.
· At least 10% lighter than existing hard ducts.
· Up to 50% elastic so as not to damage the airtightness.
· Aperture will change just by twisting the opening of the duct.
· Can be easily cut with a knife, and can be connected by just inserting the opening of the duct and wreathing with tape.
· Cutting and mounting are easy and piping work can be performed easily.Minimum Lieferzeit ： 56 Arbeitstage -
Leitungsschlauch, D-Ausführung,
KANAFLEX CORPORATION
[Features]
· A general-purpose duct hose with abundant applications and excellent quality and reliability.
· Easy cutting and mounting facilitates easy piping.Minimum Lieferzeit ： 14 Arbeitstage -
Leitungsschlauch, New-Kana-Schlauch
KANAFLEX CORPORATION
[Features]
· Superior heat resistance with a reinforced cord.
▪ Light in weight, flexible, and labor-saving.
· Cutting and mounting are easy and piping work can be performed easily.Minimum Lieferzeit ： 11 Arbeitstage -
Leitungsschlauch, Schlauch durchsichtig
KANAFLEX CORPORATION
[Features]
▪ As the equipment is transparent, the product can be seen passing through it.
▪ It has less internal resistance and a large transport capacity.
▪ As the equipment is light in weight, it is easy to bend and is work-efficient.
▪ Easy cutting and mounting facilitates easy piping.Minimum Lieferzeit ： 11 Arbeitstage -
Leitungsschlauch, Flexibler Schlauch, T-Ausführung,
KANAFLEX CORPORATION
Lightweight and expands/contracts freely. Goes down to 1/3-1/4 of its length, minimizing storage space before mounting. Easy Cutting/mounting for simple pipe work.ab∗ ： 95.44 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, AR-Ausführung,
KANAFLEX CORPORATION
[Features]
· Offers excellent abrasion resistance compared to PVC-type duct hoses.
· Excellent cold resistance and heat resistance (operating temperature range: 30°C to 80°C).
· This is a high-quality duct hose with effective conductivity (anti-static).
· Since it does not curl easily, the treatment becomes very simple.
· This hose adapts quickly to the temperature of the work environment, and does not develop ozone cracks (fissures) like those in existing hoses.
· Cutting and mounting are easy and piping work can be performed easily.Minimum Lieferzeit ： 16 Arbeitstage -
Leitungsschlauch, Schlauch öldicht
KANAFLEX CORPORATION
Has little internal resistance, therefore allowing for substantial transport capacity. Made from special oil-resistant vinyl chloride for excellent resistance to lubricating oil, cutting oil, and other oils. Cutting and mounting are easy and piping work can be performed easily.Minimum Lieferzeit ： 16 Arbeitstage -
Leitungsschlauch, Metallschlauch (MD18)
KANAFLEX CORPORATION
Uses a reinforced core of aluminum foil, glass cross, and SPTE. A lightweight and flexible duct for easy stowing, storage, and transportation.ab∗ ： 137.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Metallschlauch (MD25)
KANAFLEX CORPORATION
[Features]
· Employs a reinforcing core containing a stainless steel plate (SUS304) and specially coated glass cloth.
· Lightweight and flexible ducting which makes storing and transportation easy.
· Specially coated glass cloth which is used is highly elastic and flame resistant.
· Cutting and mounting are easy and piping work can be performed easilyab∗ ： 329.71 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Kana Aluminiumschlauch
KANAFLEX CORPORATION
[Features]
▪ Flexible, bendable, and easy piping in narrow spaces.
▪ Shrinkage to 1/10 and can be stowed compactly (II type).
▪ Lightweight and portable.
▪ Hose saves inventory and transportation space.
· Cutting and mounting are easy and piping work can be performed easily.ab∗ ： 79.91 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Kana Aluminium, Ausführung II
KANAFLEX CORPORATION
Flexible and bendable, for easy deployment in tight spaces. Can be stowed at 1/10 its full extended length. Lightweight and portable. Lets you save inventory and transportation space.ab∗ ： 81.89 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Isolationsschlauch S
KANAFLEX CORPORATION
[Features]
· This duct hose is for ventilation of highly insulated, airtight houses.
· High thermal insulation effect prevents condensation.
· Lightweight and flexible. Smaller outer case, compared to glass wool ducts. Easy to cut. Great workability.
· Single and double types available.Minimum Lieferzeit ： 14 Arbeitstage
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Werkstoff |
| Nutzung Schneidservice |
| Eigenschaften |
| ID d(mm) |
| Aussen - D(mm) |
| Farbe |
| Zulässige Flüssigkeit |
| Max. zulässiger Druck (unterhalb der Umgebungstemperatur)(MPa) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION |
| Artikelserie | ||||||||||||||||
| ab∗ | - | - | - | - | - | - | - | - | 95.44 € *Stückpreis Standardkonfiguration | - | - | 137.79 € *Stückpreis Standardkonfiguration | 329.71 € *Stückpreis Standardkonfiguration | 79.91 € *Stückpreis Standardkonfiguration | 81.89 € *Stückpreis Standardkonfiguration | - |
| Minimum Lieferzeit ： | 10 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 14 Arbeitstage | 56 Arbeitstage | 14 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 6 Arbeitstage | 16 Arbeitstage | 16 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 14 Arbeitstage |
| Werkstoff | Elastomer | PVC | PVC | PVC | Olefin-Harz | PVC | PVC | PVC | Olefin-Harz | Olefin-Harz | PVC | Aluminium | Spezielle Glasbeschichtung | Aluminium | Aluminium | PVC |
| Nutzung Schneidservice | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten | Keine | Enthalten | Enthalten | Keine | Keine | Keine | Keine | Enthalten |
| Eigenschaften | Standard / Antistatische Eigenschaften / Wärmebeständigkeit | Standard / Antistatische Eigenschaften | Standard | Standard | Standard / Wärmebeständigkeit | Standard | Standard | Standard | Standard | Standard / Antistatische Eigenschaften / Abriebfestigkeit / Kältebeständigkeit / Wärmebeständigkeit | Standard / Ölbeständigkeit | Standard / Flammbeständigkeit | Standard / Flammbeständigkeit | Standard | Standard | Standard |
| ID d(mm) | 38.1 ～ 125.9 | 32.4 ～ 152.4 | 32.4 ～ 152.4 | 350 | 65 ～ 300 | 32.4 ～ 205 | 32 ～ 303 | 32.4 ～ 101.6 | 55 ～ 79 | 38.1 ～ 152.4 | 76.4 ～ 203.7 | 51 ～ 101.5 | 51 ～ 152 | 42.7 ～ 128 | 109 ～ 131.4 | 100.3 |
| Aussen - D(mm) | 44.5 ～ 137 | 38.6 ～ 164.8 | 38.6 ～ 164.8 | 367 | 71.8 ～ 310 | 38.6 ～ 216.8 | 39.2 ～ 320 | 38.6 ～ 112.2 | 58 ～ 82 | 47.8 ～ 166.8 | 86.4 ～ 217.1 | 55 ～ 105.5 | 55 ～ 156 | 45 ～ 130.3 | 111.4 ～ 133.7 | 118 |
| Farbe | Grau | Transparent | Grau | Grau | Grau | Grau | Weiß | Transparent | Weiß | Schwarz | Grau | Grau | Grau | - | - | Weiß |
| Zulässige Flüssigkeit | Luft | Pulver / Luft | Luft | Luft | Luft | Luft | Luft | Pulver / Getreide / Luft | Luft | Pulver / Getreide / Papierschnipsel | Maschinenöl / Schmiermittel / Luft / Ölnebel | Luft | Luft / Funken | Luft | Luft | Luft |
| Max. zulässiger Druck (unterhalb der Umgebungstemperatur)(MPa) | 0.02 ～ 0.06 | 0.02 ～ 0.06 | 0.02 ～ 0.06 | 0.005 | - | 0.01 ～ 0.06 | 0.02 ～ 0.1 | 0.03 ～ 0.06 | - | 0.01 ～ 0.03 | 0.01 ～ 0.04 | 0.007 | 0.007 | 0.01 ～ 0.02 | 0.01 | 0.004 |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Werkstoff
- Aluminium
- Spezielle Glasbeschichtung
- Rostfreier Stahl
- Polypropylen
- PVC
- Olefin-Harz
- EPDM
- Elastomer
- Stahl
- Sonstige
-
Nutzung Schneidservice
- Enthalten
- Keine
-
Eigenschaften
- Standard
- Antistatische Eigenschaften
- Abriebfestigkeit
- Ölbeständigkeit
- Flammbeständigkeit
- Kältebeständigkeit
- Wärmebeständigkeit
- Geringe Partikelfreisetzung
- Flexibilität
- Sonstige
-
ID d(mm)
- 10
- 16.7
- 19.5
- 25
- 25.4
- 25.5
- 31.8
- 32
- 32.4
- 32.5
- 35
- 37.3
- 37.5
- 38
- 38,5±0,5
- 38.1
- 39
- 41
- 42.7
- 50
- 50,5±1,0
- 50.6
- 50.8
- 50.9
- 51
- 51.2
- 52.5
- 53.0
- 53.5
- 55
- 62.0
- 62.4
- 63
- 63.5
- 64
- 64,5±1,0
- 65
- 65.5
- 66
- 66.2
- 67
- 67.5
- 68.0
- 70
- 71.0
- 75
- 75.5
- 75.9
- 76
- 76.2
- 76.4
- 76.5
- 78.0
- 79
- 83
- 88.9
- 89
- 89.8
- 90
- 91
- 91.5
- 92
- 97.0
- 98
- 100
- 100.3
- 101.0
- 101.2
- 101.3
- 101.4
- 101.5
- 101.6
- 101.7
- 102
- 102.2
- 102.5
- 103
- 105
- 109.0
- 113
- 114.3
- 117.0
- 123.0
- 125
- 125.7
- 125.9
- 126
- 126.5
- 127
- 127.3
- 127.5
- 128
- 130
- 131.4
- 145.0
- 150
- 151.4
- 151.7
- 152
- 152.4
- 152.5
- 152.6
- 155
- 165
- 175
- 176.5
- 176.6
- 177.8
- 180
- 200
- 202
- 203.2
- 203.6
- 203.7
- 204.1
- 205
- 208
- 227.0
- 228.6
- 230
- 250
- 252
- 252.1
- 253
- 253,0±2,0
- 253.5
- 254
- 257
- 278
- 282
- 300
- 302
- 303
- 303.5
- 307
- 350
- 357
- 359.0
- 400
- 408
- 410.0
- 450
- 500
- 512.0
-
Aussen - D(mm)
- 21.2
- 24
- 28
- 30
- 31.4
- 32.0
- 32.4
- 37
- 38
- 38.6
- 39.2
- 39.5
- 39.8
- 40.0
- 41.5
- 42.0
- 42.6
- 42.9
- 44,5±1,0
- 44.5
- 45.0
- 45.4
- 45.8
- 45.9
- 46
- 46.2
- 46.8
- 47.8
- 48.0
- 53.8
- 54.3
- 54.5
- 55.0
- 55.3
- 56
- 56.4
- 56.6
- 56.8
- 57.5
- 57.6
- 57.9
- 58.0
- 58.5
- 59.0
- 59,8±1,5
- 59.8
- 59.9
- 60.2
- 60.4
- 61.0
- 61.2
- 61.8
- 62
- 69
- 69.5
- 70
- 70.3
- 70.5
- 71
- 71.2
- 71.5
- 71.6
- 71.8
- 72
- 72.6
- 72.7
- 73.0
- 73,2±1,5
- 73.2
- 73.6
- 74.7
- 79
- 79.5
- 80
- 80.3
- 80.5
- 81
- 81.5
- 81.8
- 82
- 82.4
- 82.5
- 83.8
- 84.5
- 84.6
- 85
- 85.2
- 85.8
- 85.9
- 86.4
- 86.8
- 87.2
- 87.6
- 87.8
- 94
- 94.5
- 95
- 95.5
- 96
- 96.8
- 97
- 97.4
- 97.7
- 98.2
- 98.6
- 99.0
- 99.3
- 99.5
- 100
- 100.3
- 101.4
- 105
- 105.3
- 105.5
- 106
- 107
- 107.3
- 107.4
- 108
- 109
- 110
- 110.5
- 110.8
- 111.4
- 111.5
- 112
- 112.2
- 113.0
- 113.2
- 113.6
- 114.6
- 118.0
- 119.3
- 125.3
- 125.9
- 129.5
- 130
- 130.3
- 130.5
- 131
- 131.5
- 132
- 133.7
- 134.5
- 135.0
- 137
- 137.2
- 137.3
- 137.5
- 137.6
- 137.7
- 138
- 138.2
- 138.5
- 138.7
- 139.3
- 139.7
- 139.9
- 140.2
- 155
- 155.5
- 155.7
- 156
- 157
- 158
- 159
- 160
- 162
- 163.8
- 164
- 164.8
- 165.5
- 166.0
- 166.2
- 166.8
- 167
- 168.8
- 177.8
- 180
- 180.7
- 182.8
- 187.8
- 190.6
- 191.0
- 192.4
- 205
- 205.7
- 207
- 207.2
- 208
- 211.0
- 211.5
- 215
- 216.0
- 216.5
- 216.8
- 217.1
- 217.2
- 217.5
- 220
- 223
- 230
- 240.4
- 243.1
- 255
- 255.9
- 256
- 259.5
- 261.0
- 263,9±2,5
- 263.9
- 265.7
- 266.2
- 268.5
- 271
- 274.2
- 280
- 292.6
- 305.9
- 306.5
- 307
- 308
- 309.6
- 310
- 311
- 316.0
- 316.4
- 318
- 320.0
- 322
- 328.2
- 332
- 357
- 367.0
- 378.5
- 407
- 418.0
- 431.0
- 458
- 469.0
- 520.0
- 532.0
-
Farbe
- Schwarz
- Weiß
- Grau
- Transparent
- elfenbeinfarben
- Dunkelbraun
- Rot
- Metallfarbe
-
Zulässige Flüssigkeit
-
Max. zulässiger Druck (unterhalb der Umgebungstemperatur)(MPa)
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (7)
- TIGERS POLYMER (18)
- TOTAKU INDUSTRIES (17)
- KANAFLEX CORPORATION (16)
- KURIMOTO (5)
- KURARAYPLASTICS (4)
- ORIENT CORPORATION (2)
- TOYO TIRE & RUBBER (2)
- COSMOTEC (1)
- OHTSUKA (1)
- SHINSUNG (1)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Leitungsschläuche
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.