NBK V-Riemenscheiben

?* Informationen zur Lieferzeit und Preisen

• • Sonderpreis

  

  Standard-V-Riemenscheibe

  NBK

  Shaft hole, keyway and push screw machining standardized.
  [Features]
  · Japan's first standard inch size product.
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Imbalance mass allowance on outer circumference is 0.2% of pulley mass or 3 g, whichever is larger.
  · Same accuracy as the balance prescribed in JIS B 1854-1987, "General use V-pulley".* M-type pulleys are exempt.
  [Applications]
  · Fans, etc.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	11.02 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Riemenscheibe mit variabler Drehzahl

  NBK

  Fine rotation ratio adjustment. Simple structure, precision machining. No rattling due to micro vibrations / shock loads.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	74.34 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  JIS V Umlenkrolle

  NBK

  Highest quality pulley, with materials together with machining and balance accuracy exceeding JIS standards.
  
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · The cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Shaft hole, keyway, and set screw machining standardized.
  · Easy set-up
  · A: 146 size, B: 218 size, C: 212 size, D: 74 size.
  · 369 size has been added into JIS standard 281 size separately
  · Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JISB1854-1987 "General use V-pulley")
  · Imbalance tolerance on the outer circumference is 0.1% of the pulley mass.
  · Surface treatment, for improving corrosion resistance is a electrodeposition coating with beautiful finish.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	14.92 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Isomec Poly Antriebsscheiben

  NBK

  V-belt pulley with high power transmission and large rotation ratio.
  [Features]
  · High transmission efficiency. ISO 9982 compliant.
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Makes it possible to design a high-transmission efficiency system with a small pulley diameter, short shaft distance and narrow pulley width.
  ・ Can be attached and removed from shaft and positioned with hex or socket wrench.
  · In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission can be achieved.
  · Set the imbalance tolerance on the outer circumference to 1 g or 0.1% of the total mass of the pulley and bushing, whichever is larger.
  · Balancing is adjusted using a balancing machine.
  [Applications]
  · Automobiles, manufacturing machinery, air-conditioning equipment, electric tools, household appliances, etc.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	75.99 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stufenloses Getriebe (Hagino-Modell) W / L

  NBK

  [Features]
  · Rotation has continuously variable speed.
  · In the hagino type CVT, by placing a speed change pulley on the intermediate shaft and changing the position thereof, the rotational speed of the pulley on the driven side is changed utilizing the tension balance of the belt, allowing continuously variable transmission.
  · Alignment is automatically adjusted.
  · Both side disks and middle disks move freely on the shaft.
  · Alignment with the driving side pulley and the driven side pulley is automatically adjusted.
  · For this reason, the center of the belt is always held, and the belt is not strained.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	219.70 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Isomec SP Scheibe

  NBK

  V pulley to international standards. Either general purpose V-belt, or narrow width V-belt can be used.
  
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · The cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Can be attached and removed from shaft / positioned with hex or socket wrench. In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission is achieved.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	42.00 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spannrollenkeil

  NBK

  High-speed, high power transmission V-belt pulley that conforms with JIS B 1855.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Enables high speed and high power transmission to make it possible to design a system with a smaller pulley diameter, shorter shaft distance and fewer belts.
  · Full lineup. 491 size. 3V: 153 size, 5V: 257 size, 8V: 81 size.
  · 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JIS B 1855-1991, "Slim V-pulley").
  · Imbalance tolerance on the outer circumference guaranteed to be 0.1% of pulley mass.
  [Applications]
  · Fans, etc.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	16.74 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Vankin Riemenscheibe VK

  NBK

  Lightweight V-belt pulley made of sheet metal.
  [Features]
  · Rotation molding method imparts a rigidity suitable for light/moderate load transmission in general industrial machinery.
  · Pulley grooves are rounded with no sharp corners to avoid damage to the belt.
  · Lightweight, so the entire machine, including base, pillow block, etc., can be made lighter and more compact.
  [Applications]
  · Fans, etc.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	14.61 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Isomec Buchse / Adapter

  NBK

  ISOMEC bushing can be used simply by machining a straight hole into the rotating body.

  ab∗ ：	50.31 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Isomec Buchse / angeschraubte Nabe

  NBK

  ISOMEC bushing can be used simply by connecting a bolt to the rotating body.

  ab∗ ：	68.69 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Isomec-Buchsen

  NBK

  Safe and reliable fastening system. Responding to a design change is easy.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	21.99 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rillen-Lehre für VMG V Flaschenzug

  NBK

  Gauge for checking wear of pulley V-groove part. Orders can be made for individual shapes, or as a set for each groove shape. A gap has been provided between the gauge and the outer circumference of the pulley and the bottom of the V-groove. Early replacement is recommended for transmission efficiency.

  ab∗ ：	82.01 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...