TAKIGEN Schlösser / Verschlussriegel für Möbel（Seite 3）

?* Informationen zur Lieferzeit und Preisen

• • Sonderpreis

  

  Kunststoff-Flachschnappverschlussgriff, AP-151R-B

  TAKIGEN

  [Features]
  · Snatch-lock type flat handle that is resistant to vibration and impact, etc.
  · Rounded soft design.
  · One touch open/close.
  · Dust-proof and drip-proof structure.
  · To improve dust-proofing, a shutter is attached to the front of the key (standard equipment)

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	38.44 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Flachriegel C-866

  TAKIGEN

  [Features]
  · Pull the lever to retract the latch and open the door.
  · If the latch is not fully extended, it notifies you that the lever is lifted up and in a semi-locked condition (using semi-lock warning function). Passed 350,000 repetitions of a continuous durability test for latch tip strength 980N· Lever - Pulling strength 245N

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	13.18 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Flachverschluss CP-876

  TAKIGEN

  [Features]
  · Lightweight and ideal for small doors.
  · Doors can be opened and closed with one touch

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	13.09 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Drahtloser Karabinerverschluß, C-10

  TAKIGEN

  Pull the lever to retract the latch and open the door. Close it with one touch.
  It is thin and can be directly attached to the panel surface.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	6.29 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Verriegelung für Cremorne-Schloss C-376

  TAKIGEN

  [Features]
  · With the tapering of the latch tip, this can be combined with a Cremone lock A-375 (sold separately) to obtain a strong sealing effect.
  · 2-point tightening, 3-point tightening strong sealing is possible

  2D CAD Daten verfügbar

  ab∗ ：	47.85 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahlzylinder Deadlock C-1117

  TAKIGEN

  [Features]
  · With a 12 mm diameter dead bolt, and emphasis on safety, it can be installed even after processing.
  · Multiple key combinations can be obtained based on the arrangement of the special pin.
  · Master system can be incorporated.
  · Made of stainless steel, corrosion resistant

  2D / 3D CAD Daten verfügbar

  ab∗ ：	89.12 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Schiebeverschluss C-1175C

  TAKIGEN

  2D CAD Daten verfügbar

  ab∗ ：	34.81 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Schlossfalle C-1625-4

  TAKIGEN

  2D CAD Daten verfügbar

  ab∗ ：	29.02 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl eingebetteter Handgriff FA-1944

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it will renew the image of the van body without disfiguring the appearance.
  · Made of stainless steel, corrosion resistant.
  · You can open and close the door by one-touch operation of the handle.
  · Ideal for medium and small doors.
  · Lock has a reversible key and a dust-proof shutter.
  · For both left hand and right hand use

  2D CAD Daten verfügbar

  ab∗ ：	192.80 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Doppel Verriegelung C-628

  TAKIGEN

  [Features]
  · 2 stage opening and closing will release the steam inside the oven, etc.
  · Receiving can be fine-tuned

  2D CAD Daten verfügbar

  ab∗ ：	37.71 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Dual Lock C-120

  TAKIGEN

  [Features]
  · Unlike general latch devices, rotating the handle causes latching, and even if you exceed beyond a certain point (dead point), it will certainly not come off even if pulled

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	12.65 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Push-Modell Verschluss quadratisch, C-881

  TAKIGEN

  [Features]
  · Drawers, etc. can be fixed in closed or pulled out state

  2D CAD Daten verfügbar

  ab∗ ：	44.23 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spannverschluss C-258

  TAKIGEN

  [Features]
  · Ideal for one-touch doors.
  · Can be controlled remotely by installing a flat bar

  2D / 3D CAD Daten verfügbar

  ab∗ ：	12.08 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spannverschluss C-625-2

  TAKIGEN

  [Features]
  · Door can be closed with one touch.
  · The latch is made of iron to be robust.
  · Solid structure made in USA

  2D CAD Daten verfügbar

  ab∗ ：	47.85 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kontrollzentrum mit Riegel C-870

  TAKIGEN

  [Features]
  · Latch is attached to the control center, and the latch and lever operate with 60° rotation left and right (C-870-2 is 45°)

  2D / 3D CAD Daten verfügbar

  ab∗ ：	36.99 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Toilettenschloß C-874

  TAKIGEN

  [Features]
  · This product is developed for in-vehicle toilets.
  · Indicator for in-room display on the surface.
  · On the inside there is an easy to operate knurled knob that can be locked in three directions

  2D CAD Daten verfügbar

  ab∗ ：	71.02 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Ringverschluss C-41

  TAKIGEN

  [Features]
  · Lifting the ring moves the latch and the door opens.
  · Close it with one touch

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	13.87 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Ringverschluss C-42

  TAKIGEN

  [Features]
  · Lifting the ring moves the latch and the door opens.
  · Close it with one touch

  2D / 3D CAD Daten verfügbar

  ab∗ ：	13.20 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Ringverschluss C-44

  TAKIGEN

  [Features]
  · Since the pull tab stops at 60°, it is ideal for large-sized doors with plurality of use.
  · Panel drilling is easy

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	29.38 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Verriegelungsverschluss für Stangenleiste C-58

  TAKIGEN

  [Features]
  · Since the latch head is made of Delrin resin, it closes gently

  2D / 3D CAD Daten verfügbar

  ab∗ ：	32.63 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffverschluss für Drähte, CP-626

  TAKIGEN

  [Features]
  · Lightweight and soft type resin latch.
  · The latch stroke is not transmitted to the wire while closing the door.
  · You can easily change the orientation of the latch

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	6.29 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kleine Fallenschloss für Draht C-49

  TAKIGEN

  [Features]
  · Lightweight and small one-touch latch lock

  2D / 3D CAD Daten verfügbar

  ab∗ ：	8.89 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  One-Touch-Befestigung Paneel C-420

  TAKIGEN

  [Features]
  · CP-420 made of zinc alloy (installation method is different). The interior door of a distribution board, etc., fixed with conventional screws and knurled knob can be opened and closed with one touch to save labor.
  · Multiple fasteners can be used simultaneously

  3D CAD Daten verfügbar

  ab∗ ：	9.32 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Kunststoff One-Touch-Schalttafelbefestigung CP-420

  TAKIGEN

  The interior door of a distribution board, etc., fixed with conventional screws and knurled knob can be opened and closed with one touch to save labor.
  Multiple fasteners can be used simultaneously. Quick-in type that only needs to be plugged to install and requires little effort.
  1 size suitable for (0.8) 1.2, 1.6, 2.0 mm.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	2.80 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Kunststoff One-Touch-Schalttafelbefestigung CP-420-MD

  TAKIGEN

  [Features]
  · The interior door of a distribution board, etc., fixed with conventional screws and knurled knob can be opened and closed with one touch to save labor.
  · Quick-in type that only needs to be plugged in to install.
  · Reduces labor.
  · Easy locking and unlocking with a flathead screwdriver (JISC8480 compliant).
  · Attached indicator makes confirmation of locking easy.
  · Lever can be fixed with a sealing wire.
  · Flame retardant materials (UL94V-2) used

  3D CAD Daten verfügbar

  ab∗ ：	2.98 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Vierkantiger Riegel C-168

  TAKIGEN

  [Features]
  · 10 mm latch will operate with 50° rotation left and right.
  · Ideal for one-touch doors

  2D / 3D CAD Daten verfügbar

  ab∗ ：	11.94 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Quadratisches Drucktastenschloss C-79

  TAKIGEN

  [Features]
  · Lock by rotating the pushbutton on the locking device by 90°

  2D / 3D CAD Daten verfügbar

  ab∗ ：	21.27 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Kunststoff One-Touch-Schalttafelbefestigung mit Schlüssel, CP-421

  TAKIGEN

  [Features]
  · CP-420 is a keyed type.
  · Fastening tool for distribution board (JIS).
  · The interior door of a distribution board, etc., fixed with conventional screws and knurled knob can be opened and closed with one touch to save labor.
  · Multiple fasteners can be used simultaneously.
  · Quick-in type that only needs to be plugged to install and requires little effort.
  · 1 size corresponds to several kinds of plate thickness

  2D / 3D CAD Daten verfügbar

  ab∗ ：	4.40 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Große Ringlasche C-41

  TAKIGEN

  [Features]
  · Lifting the ring moves the latch and the door opens.
  · Close it with one touch

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	16.45 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Integrierter Griff für Luftdichtheit FA-815N-1

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it will renew the image of the van body.
  · Select from 3 pipe diameters (ø27.2, ø21.7, ø16).
  · Uses the trigger method, which makes handle operation easy and improves security.
  · Even if it gets locked while working inside the cabin, the safety push rod (FC-705· 706), etc. can be used to escape.
  · Lock has a reversible key and a dust-proof shutter.
  · Indicator for confirmation so there is no forgetting to lock.
  · Left and right combination

  2D CAD Daten verfügbar

  ab∗ ：	135.88 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Integrierter Griff für Luftdichtheit FA-815N-2

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it will renew the image of the van body.
  · Select from 3 pipe diameters (ø27.2, ø21.7, ø16).
  · Uses the trigger method, which makes handle operation easy and improves security.
  · Even if it gets locked while working inside the cabin, the safety push rod (FC-705· 706), etc. can be used to escape.
  · The doors for dry vans (t = 13 to 14) can have pipes inside.
  · In this case, using a back cover (FA-815-2-UC) or pipe guide (FA-815-G) leaves the inside of the door refreshed.
  · Lock has a reversible key and a dust-proof shutter.
  · Indicator for confirmation so there is no forgetting to lock.
  · Left and right combination

  2D CAD Daten verfügbar

  ab∗ ：	18.16 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Integrierter Griff für Luftdichtheit FA-815N-3

  TAKIGEN

  [Features]
  · Since the pipe is installed inside the door, the appearance is clean and the image of the van body is refreshed.
  · Select from 3 pipe diameters (ø27.2, ø21.7, ø16).
  · Uses the trigger method, which makes handle operation easy and improves security.
  · A safety push rod can be installed inside the cabinet (FC-705/FC-706) to enable escape in case someone is trapped.
  · Using FA-1820-G or FA-815-G as a pipe guide inside the door keeps it neat.
  · Lock has a reversible key and a dust-proof shutter.
  · Indicator for confirmation so there is no forgetting to lock.
  · Left and right combination

  2D CAD Daten verfügbar

  ab∗ ：	157.38 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Integrierter Griff für Luftdichtheit FA-816

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it will renew the image of the van body without disfiguring the appearance of the door.
  · The handle lock part uses the snatch lock method, and the door can be opened and closed with one touch.
  · The red indicator will appear unless the handle is securely locked.
  · Door closing operation can be visually confirmed and is safe

  2D / 3D CAD Daten verfügbar

  ab∗ ：	111.25 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Integrierter Griff für Luftdichtheit FA-818

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it will renew the image of the van body.
  · Emergency escape is possible if a safety push rod is installed in the cabinet.
  · Lock has a reversible key and a dust-proof shutter.
  · Left and right combination

  2D CAD Daten verfügbar

  ab∗ ：	132.08 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Türverriegelung C-1868

  TAKIGEN

  [Features]
  · Door can be closed with one touch.
  · It is all stainless steel, with excellent corrosion resistance.
  · Handle attached with square bar (A-103 etc.) and wires can be remote controlled.
  · For right or left use

  ab∗ ：	106.50 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...