Lieferzeit |
- Alle Produkte
- Versand am selben Tag
- 3 Tage oder weniger
- 5 Tage oder weniger
- 6 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
- 9 Tage oder weniger
- 10 Tage oder weniger
- 11 Tage oder weniger
- 12 Tage oder weniger
|
?* Informationen zur Lieferzeit und Preisen
-
TOTAKU INDUSTRIES
Uses abrasion resistant rubber for three times the abrasion resistance of TAC SD-A. Conductive for anti-static effects.
Minimum Lieferzeit : |
10 Arbeitstage
|
-
TOTAKU INDUSTRIES
[Features]
∙ Heat resistant specifications to resist 100℃ hot air (straight pipes that are designed to withstand 120℃ hot air).
∙ In addition to the conductive rubber, we use steel wire for grounding, which considerably improves safety.
∙ Compared to TAC helang, ozone degradation is less likely to happen to this hose.
∙ Product has superior weather resistance properties
Minimum Lieferzeit : |
10 Arbeitstage
|
-
TOTAKU INDUSTRIES
The abrasion resistance performance is approximately 4 times that of TAC HERAN-N. A superior antistatic effect is achieved by the introduction a ground wire. Liquids are transported smoothly due to the extremely smooth inner surface. The transparent duct enables checking of the material being transported.
[Features]
· This product has 4 times the abrasion resistance of TAC HERAN-N (based on for initial value of 1 for TAC HERAN-N in the abrasion amount comparison test—eight hours after starting).
· The duct hose is transparent, which enables visually checking inside the duct.
· Superior anti-static effect due to the inclusion of a ground wire.
· Liquids are transported smoothly due to the extremely smooth inner surface.
Minimum Lieferzeit : |
10 Arbeitstage
|
-
TOTAKU INDUSTRIES
A lightweight, flexible, and wear resistant hose. The wear resistance performance is 4 times that of TAC Heran New Heat Resistant. Offers excellent durability due to the reinforcing thread, allowing use in locations with different heights where tensile loads are applied.
[Features]
· Has 4 times the wear resistance of TAC Heran New Heat Resistant (assuming the initial wear (8 hours after test start) of TAC Heran New Heat Resistant is 1, in the abrasion loss comparison).
· The product is transparent which makes it easy to check fluids and to find locations where fluids are clogged.
· Lightweight and flexible.
· Offers a pressure resistance performance that can withstand up to a maximum allowable pressure of 0.5Mpa (5.1kgf/f).
· Offers excellent durability due to reinforcing thread, allowing use possible in locations with different heights where tensile loads are applied to the hose.
· Offers a superior anti-static effect by means of a ground wire.
Minimum Lieferzeit : |
44 Arbeitstage
|
-
TOTAKU INDUSTRIES
Excellent pressure resistance, with a pressure tolerance of 1.00 MPA. The structure does not stretch when compressed. Uses abrasion-resistant rubber for the inner layer, offering excellent abrasion resistance. Stands up to external pressure and deforms little.
Minimum Lieferzeit : |
10 Arbeitstage
|
|
---|
Warenzeichen |
---|
Artikelserie |
---|
ab∗ |
---|
Minimum Lieferzeit : |
---|
Zulässige Flüssigkeit/Verwendung
|
---|
Nutzung Schneidservice
|
---|
Nenn-Innen-Ø d
|
---|
Aussen - D(mm)
|
---|
Eigenschaften
|
---|
Schlauchmaterial
|
---|
Metallbefestigungen
|
---|
Farbe
|
---|
| ![TAC Helan](//de.misumi-ec.com/linked/material/mech/TTK1/PHOTO/221000536469_003.jpg?$product_view_c$)
| ![TAC Helan Neu, hitzebeständig](//de.misumi-ec.com/linked/material/mech/TTK1/PHOTO/221000536470_003.jpg?$product_view_c$)
| ![TAC Helan Klar](//de.misumi-ec.com/linked/material/mech/TTK1/PHOTO/221005134569_003.jpg?$product_view_c$)
| ![TAC Helan Ace](//de.misumi-ec.com/linked/material/mech/TTK1/PHOTO/221005134570_003.jpg?$product_view_c$)
| ![Leitungsstrom AT](//de.misumi-ec.com/linked/material/mech/TTK1/PHOTO/TTK1_221005134581.jpg?$product_view_c$)
|
---|
Warenzeichen | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES |
---|
Artikelserie | TAC Helan | TAC Helan Neu, hitzebeständig | TAC Helan Klar | TAC Helan Ace | Leitungsstrom AT |
---|
ab∗ | -
| -
| -
| -
| -
|
---|
Minimum Lieferzeit : |
10 Arbeitstage
|
10 Arbeitstage
|
10 Arbeitstage
|
44 Arbeitstage
|
10 Arbeitstage
|
---|
Zulässige Flüssigkeit/Verwendung | Getreide | Getreide | Getreide | Getreide | Getreide |
---|
Nutzung Schneidservice | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten |
---|
Nenn-Innen-Ø d | 38 ~ 150 | 38 ~ 150 | 38 ~ 200 | 100 | 50 ~ 200 |
---|
Aussen - D(mm) | 47 ~ 172 | 47.8 ~ 173 | 48.5 ~ 226.4 | 121.8 | 69.5 ~ 247.5 |
---|
Eigenschaften | Antistatische Eigenschaften / Abriebfestigkeit / Vakuum- | Abriebfestigkeit / Wetterbeständigkeit / Wärmebeständigkeit / Vakuum- | Antistatische Eigenschaften / Abriebfestigkeit / Transparenz | Antistatische Eigenschaften / Abriebfestigkeit / Transparenz | Abriebfestigkeit / Druckwiderstand / Formbeständigkeit |
---|
Schlauchmaterial | Sonstige | Ethylen-Propylen-Kautschuk | Polyurethan | Polyurethan | Sonstige |
---|
Metallbefestigungen | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang |
---|
Farbe | Schwarz | Schwarz | Transparent (einschließlich nichtweißer Farben) | Transparent (einschließlich nichtweißer Farben) | Orange |
---|
Loading...