TRUSCO NAKAYAMA Scheiben（work material：Kunststoff）

?* Informationen zur Lieferzeit und Preisen

• 

  Nylon-Scheibe【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Uses nylon abrasives made by reinforcing tangled nylon fibers with abrasive dust. Compared to when the workpiece comes into direct contact with the abrasive in paper abrasive cloths, the fibers embedded in nylon abrasive agent act as a cushion, preventing excessive snagging of the workpiece. Mainly used for polishing work. No clogging as it has significant autogenous action.
  [Applications]
  · For removing burn of welding, sanding sealers at curved surfaces in woodworking, finishing before coating, satin finish, and mirror surface pretreatment.
  · Tool used: disc grinder.

  ab∗ ：	53.77 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „GP Disk Wheel“ (direkt einschraubbar / senkrechte Ausführung) 【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · For use with ordinary metal. Gap between polishing cloths is wide, preventing clogging. As the substrate is smaller than the outer diameter of the polishing cloth, the lower surface and sides can be polished at the same time.
  · It has heat dissipation property, causing little or no distortion or burning of the material to be polished due to heat.
  · It can be installed in a single action (screw type).
  [Applications]
  · Pre-plating polishing, metal surface polishing, rust removal, and deburring. Polishing woodwork and plastic.
  · Tool used: disc grinder.

  ab∗ ：	35.20 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  TOKUMARU α【10 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · This product is appropriate for a wide range of uses, and is quiet when polishing and with less vibrations compared to flexible grindstone or offset grindstone.
  · Uses China-made paper.
  [Applications]
  · Grinding and polishing of steel, welding bead removal, rust removal, peeling of paint, polishing of woodwork.
  · Tool used: dedicated electric disc grinder.

  ab∗ ：	22.66 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  TOKUMARU J【10 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · This product eliminates the pricing difference with traditional grindstones while retaining the durability, work efficiency, low noise, and safety characteristic of paper abrasives.
  · A high-hardness material mainly composed of alumina oxide.
  · Uses Japan-made paper.
  [Applications]
  · Grinding and polishing of steel, welding bead removal, rust removal, peeling of paint, polishing of woodwork.
  · Tool used: dedicated electric disc grinder.

  ab∗ ：	29.71 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  GP Lamellenscheibe gewölbt【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · It uses polishing cloth with rounded corners, making bending easy and allowing easy grinding work even on a small rounded surface. As the pad is small and has cushioning properties, excessive scraping is not an issue, and it fits perfectly on uneven surfaces. Can be used right down to the base, making it highly economical.
  · A professional polishing agent, hand planted and crimped one by one.
  [Applications]
  · Removing paint and polishing prior to plating. Ideal for polishing of stainless steel, iron, alloys, wood and plastics.
  · Tool used: disc grinder.

  ab∗ ：	57.50 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  GP Lamellenscheibe gewölbt【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · It uses polishing cloth with rounded corners, making bending easy and allowing easy grinding work even on a small rounded surface. As the pad is small and has cushioning properties, excessive scraping is not an issue, and it fits perfectly on uneven surfaces. Can be used right down to the base, making it highly economical.
  · A professional polishing agent, hand planted and crimped one by one.
  · Use the zirconia type which bites well into abrasive materials for grinding work.
  [Applications]
  · Removing paint and polishing prior to plating. Ideal for polishing of stainless steel, iron, alloys, wood and plastics.
  · Tool used: disc grinder.

  ab∗ ：	46.81 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  GP Lamellenschleifteller【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · The small pads are well cushioned, enabling high performance on uneven surfaces without deep scraping.
  · Can be used until the end, making it friendly on the wallet.
  · Can be used for polishing on side faces.
  · With its soft touch, this product will not leave you tired.
  · A professional polishing agent, hand planted and crimped one by one.
  [Applications]
  · For removing welding beads, removing painting, grinding before plating, and polishing stainless steel, alloy, wood, plastic, and others.
  · Tool used: disc grinder.

  ab∗ ：	74.45 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „GP Disc Wheel“ (senkrechte Ausführung) 【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · For use with ordinary metal. Gap between polishing cloths is wide, preventing clogging even when rust or paint is peeled off. Since the polishing cloth comes into contact with the material to be polished at right angles, the material will not be damaged.
  · It has heat dissipation property, causing little or no distortion or burning of the material to be polished due to heat.
  [Applications]
  · Pre-plating polishing, metal surface polishing, rust removal, and deburring.
  · Polishing wood and plastic.
  · Tool used: disc grinder.

  ab∗ ：	36.79 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „GP Disc Wheel Soft“ (diagonale Ausführung) 【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Has diagonally attached blades and gently contacts workpieces.
  · It has heat dissipation property, causing little or no distortion and burning of the material to be polished due to heat.
  [Applications]
  · Pre-plating polishing, metal surface polishing, rust removal, and deburring.
  · Polishing woodwork and plastic.
  · Tool used: disc grinder.

  ab∗ ：	33.85 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „Fabric Disc“ (für Schwingschleifer / Vliesschleifmittel) 【2 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Made from non-woven nylon fibers and alundum abrasive grains, thereby ensuring gentle grinding work, suitable for finished products.
  · Attached to the pad with Velcro tape for use.
  [Applications]
  · For removing light rust from metallic products and for glazing.
  · Smoothing out wood products.
  · Tool used: dual-action sander (Velcro type).

  • Mengenrabatt

  ab∗ ：	4.21 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Schleifpapier【10 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · A disc polishing agent with superior heat-resistance, using a vulcanized fiber circuit board.
  · Uses silicon carbide abrasive grain.
  · Attach to a disc grinder to conduct efficient rust removal, deburring, releasing coating film, grinding of stone materials etc. (Pneumatic/electric dual use)
  · Use at a peripheral speed of 4,300 m/min.
  [Applications]
  · For removing welding beads: #14 - #24.
  · Removal of rust on ship or car bodies: #24 - #60.
  · Metal deburring: #40 - #80.
  · For polishing stone materials (medium finish): #80 - #120.
  · Rough removal of paint: #80 - #120.

  ab∗ ：	15.58 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  ASTRA Klettscheibe, Loch, braun【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Dust suction type Double-Action Sander paper that uses alundum abrasive particles. (some hole diameters may not match.)
  · Velcro tape disc with a hole corresponding to the dust suction type dual action sander. Suction of the dust is conducted through 6 holes.
  · Pattern-coated abrasive cloth is coated with abrasive grain in an even pattern to provide synergistic beating, grinding, and polishing.
  · The pattern coating results in stronger polishing power with less clogging compared to conventional products. Furthermore, the ventilation creates a cooling effect, reducing the likelihood of burns.
  [Applications]
  · For polishing putty and surfacer on metal coatings. (Surface polishing)
  · Fabric and coating polish for woodwork, furniture, musical instruments, etc.
  · Sanding and surface smoothing of baked coatings.
  · Tool used: dust-suction type dual action sander. (Velcro Type)

  ab∗ ：	5.10 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  ASTRA Klettscheibe, Weiß【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Pattern-coated abrasive cloth is coated with abrasive grain in an even pattern to provide synergistic beating, grinding, and polishing.
  · The pattern coating results in stronger polishing power with less clogging compared to conventional products. Furthermore, the ventilation creates a cooling effect, reducing the likelihood of burns.
  · Dust suction type Double-Action Sander paper that uses alundum abrasive particles.
  [Applications]
  · For polishing putty and surfacer on metal coatings.
  · Fabric and coating polish for woodwork, furniture, musical instruments, etc.
  · Sanding and surface smoothing of baked coatings.
  · Tool used: non-dust suction type dual action sander. (Velcro Type)

  ab∗ ：	5.10 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Klettscheibe Ø50【100 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · The count can be exchanged with a single touch.
  · Sharp cutting edge.
  · Abrasion marks are unlikely to appear.
  · Minimal clogging and long life.
  · Granule degree #120-#1000 is water resistant and can be combined with water.
  [Applications]
  · Automotive buffing repair process.
  · Various types of buffing in woodworking and furniture making.
  · Buffing of building paint and in interior construction.
  · Paint buffing in all types of vehicles.
  · Black baked paint buffing.

  ab∗ ：	20.32 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „GP Nylon Disc“ (direkt einschraubbar) 【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · It can be installed in a single action (screw type).
  · Uses a nylon abrasive agent in which abrasive is set between intertwined nylon fibers, so compared to when the workpiece comes into direct contact with the abrasive in paper abrasive cloths, the fibers embedded in nylon abrasive agent act as a cushion, preventing excessive snagging of the workpiece. Mainly used for polishing work. No clogging as it has significant autogenous action.
  [Applications]
  · For removing burn of welding, sanding sealers at curved surfaces in woodworking, finishing before coating, satin finish, and mirror surface pretreatment.
  · Tool used: disc grinder.

  ab∗ ：	53.84 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „New Nylon Disc“ (für hohe Umdrehungsgeschwindigkeit) 【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Even without adjusting the rotation speed, there is no burning or clogging. (High Rotation Model)
  · Uses nylon abrasives made by reinforcing tangled nylon fibers with abrasive dust.
  · It prevents over-grinding of non-abrasive materials.
  [Applications]
  · For removing burn of welding, sanding sealers at curved surfaces in woodworking, finishing before coating, satin finish, mirror surface pretreatment, and paint removal.

  ab∗ ：	58.96 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „New Nylon Disc“ (für hohe Umdrehungsgeschwindigkeit / direkt einschraubbar) 【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · It can be installed in a single action (screw type).
  · Even without adjusting the rotation speed, there is no burning or clogging. (High Rotation Model)
  · Uses nylon abrasives made by reinforcing tangled nylon fibers with abrasive dust.
  · It prevents over-grinding of non-abrasive materials.
  [Applications]
  · For removing burn of welding, sanding sealers at curved surfaces in woodworking, finishing before coating, satin finish, mirror surface pretreatment, and paint removal.

  ab∗ ：	52.97 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Nylon Mini-Schleifscheibe【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Uses a nylon abrasive agent in which abrasive is set between intertwined nylon fibers, so compared to when the workpiece comes into direct contact with the abrasive in paper abrasive cloths, the fibers embedded in nylon abrasive agent act as a cushion, preventing excessive snagging of the workpiece.
  · Beautiful hairline processing is possible by using the side for straightening the line.
  [Applications]
  · For removing burns on stainless steel, aluminum and welding components. For paint film removal and mirror finishing.
  · Tool used: disc grinder.

  ab∗ ：	41.15 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schwamm-Schleifscheibe α【5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · The product is a sponge grindstone made of polyvinyl alcohol (PVA) that features superior elasticity and delivers beautiful finished surfaces with moderate elasticity.
  · The GC (green carborundum) abrasive grain is used with resins that have been more carefully selected than conventional PVA.
  · Stable polished surfaces can be derived with improved durability.
  [Applications]
  · Polishing of titanium, stone, glass; chamfering and deburring of resin.

  ab∗ ：	92.95 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...