Lieferzeit |
|
---|
?* Informationen zur Lieferzeit
OILES
The diameter/length are roughly drawn dimensions. For use as lubrication.
ab∗ : | 35.72 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
OILES
The Oiles Aramid M series are formed heat-resistant engineering plastic products made of aromatic polyamide (meta-aramid).
ab∗ : | 2.12 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Thermalloy, T-Lager-Ausführung
DAIDO METAL
[Features/Caution]
· Type T Thermalloy is sold as a material. Since it can not be used as sold, ensure that the inside diameter, outside diameter, and end surfaces are cut before use.
· This product is a sintered material. Not able to withstand impact loads and should not be used in such cases. Please also note that it is not durable against bending load and tensile load.
· Claws may become embedded when chucking during machining, so the minimum force required should be used when chucking for fixing.
· Take sufficient care to manage the cutting edge and feed speed during machining. Be aware that excessive machining will cause fissures and cracks.
· If you would like machining to be completed at our company, we can do so if directions are provided in the drawings. Please inquire if you are considering this.
ab∗ : | 80.80 € |
---|---|
Minimum Lieferzeit : | 19 Arbeitstage |
*Stückpreis Standardkonfiguration
OILES
Can be used oil free and provides superior resistance to load and abrasion.
ab∗ : | 31.69 € |
---|---|
Minimum Lieferzeit : | 10 Arbeitstage |
*Stückpreis Standardkonfiguration
OILES
Excellent oil film retention and superior abrasion/seize resistance can greatly reduce the number of times lubrication is necessary.
[Features]
· Choose your part number according to the appropriate diameter.
· The diameter/length are roughly drawn dimensions.
· Ensure that oil is added after machining and before use
ab∗ : | 6.09 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
OILES
Can be used oil free and provides superior resistance to load and abrasion.
[Features]
· Choose your part number according to the appropriate diameter
ab∗ : | 5.55 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Material Rundstab: Glitron F (77M)
OILES
Low static friction coefficient and no stick slips. Can also be used in a wide range of temperatures, from low to high.
[Features]
· Choose your part number according to the appropriate diameter
ab∗ : | 32.93 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Material Rundstab Cermet G (55M)
OILES
Provides high friction resistance when oil film formation is discouraged due to high temperatures.
ab∗ : | 2.72 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Material Rundstab Cermet M (54M)
OILES
Provides high friction resistance when oil film formation is discouraged due to reciprocating motion, intermittent operation, and swing motion.
[Features]
· Choose your part number according to the appropriate diameter and length.
· Ensure that oil is added after machining and before use
ab∗ : | 2.38 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Material Rundstab: Lutech E (LEM)
OILES
Can be used without oil, and provides conductivity.
[Features]
· Choose your part number according to the appropriate diameter
ab∗ : | 40.05 € |
---|---|
Minimum Lieferzeit : | 14 Arbeitstage |
*Stückpreis Standardkonfiguration
OILES
Carbon fiber-reinforced oil impregnated polyacetal round bar. Can be used without oil, and exhibits superior wear resistance in an abrasive environment.
Superior speed characteristics.
ab∗ : | 42.86 € |
---|---|
Minimum Lieferzeit : | 20 Arbeitstage |
*Stückpreis Standardkonfiguration
OILES
This product inherits the heat resistance and high hardness from the Oiles Aramid M series
and features improved wear resistance and low friction characteristics necessary for bearings.
ab∗ : | 125.69 € |
---|---|
Minimum Lieferzeit : | 19 Arbeitstage |
*Stückpreis Standardkonfiguration
OILES
This product inherits the heat resistance and high hardness from the Oiles Aramid M series and features improved wear resistance and low friction characteristics necessary for bearings.
ab∗ : | 9.09 € |
---|---|
Minimum Lieferzeit : | 19 Arbeitstage |
*Stückpreis Standardkonfiguration
OILES
The Oiles Aramid M series are formed heat-resistant engineering plastic products made of aromatic polyamide (meta-aramid).
ab∗ : | 9.09 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
Material Rundstab #250-07 (#425-07) (25M)
OILES
Cylindrical rod material #250-07 can be used as #425-07 (for in-water use) when adding wax after machining.
ab∗ : | 94.13 € |
---|---|
Minimum Lieferzeit : | 19 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
ab∗ |
Minimum Lieferzeit |
Form |
Werkstoff |
Warenzeichen | OILES | OILES | DAIDO METAL | OILES | OILES | OILES | OILES | OILES | OILES | OILES | OILES | OILES | OILES | OILES | OILES |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Artikelserie | |||||||||||||||
ab∗ | 35.72 € *Stückpreis Standardkonfiguration | 2.12 € *Stückpreis Standardkonfiguration | 80.80 € *Stückpreis Standardkonfiguration | 31.69 € *Stückpreis Standardkonfiguration | 6.09 € *Stückpreis Standardkonfiguration | 5.55 € *Stückpreis Standardkonfiguration Mengenrabatt | 32.93 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.72 € *Stückpreis Standardkonfiguration | 2.38 € *Stückpreis Standardkonfiguration | 40.05 € *Stückpreis Standardkonfiguration | 42.86 € *Stückpreis Standardkonfiguration | 125.69 € *Stückpreis Standardkonfiguration | 9.09 € *Stückpreis Standardkonfiguration | 9.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 94.13 € *Stückpreis Standardkonfiguration |
Minimum Lieferzeit | 4 Arbeitstage | Versand am selben Tag | 19 Arbeitstage | 10 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | 14 Arbeitstage | 20 Arbeitstage | 19 Arbeitstage | 19 Arbeitstage | 7 Arbeitstage | 19 Arbeitstage |
Form | Rundstab | Rundstab | Rundstab | Rundstab | Rundstab | Rundstab | Rundstab | Rundstab | Rundstab | Rundstab | Rundstab | Rundstab | Rundstab | Rundstab | Rundstab |
Werkstoff | Metallisch | Metallisch | Metallisch | Harzbasis | Metallisch | Harzbasis | Harzbasis | Metallisch | Metallisch | Harzbasis | Harzbasis | Metallisch | Harzbasis | Metallisch | Harzbasis |
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.