?* Informationen zur Lieferzeit

• 

  Stäbe

  SURUGA SEIKI

  A stainless steel rod for mounting optical parts. A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.
  
  [Features]
  ■ [A40M/A41M] A stainless steel rod for mounting optical parts.
  · A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.
  ■ [A40/A41/A42] A stainless steel rod for mounting optical parts.
  · Includes an M6 (P=1) screw, which can be used together with models A40 to A42, enabling mounting to various types of holder etc. From A40 to A42, M6P=1 screws are included, making mounting possible on a variety of holders.
  · There is a through hole with a diameter of ø3 mm or 4 mm at the bottom of the M6 screw. Insert a wrench or similar into this hole when mounting to a holder in order to fix it securely.

  Minimum Lieferzeit ：	9 Arbeitstage

• 

  Stativfuß mit Vertikal-Justierung

  SURUGA SEIKI

  [Features]
  · A rod stand capable of upward and downward micro movements.
  · After fixing the rod with the rod fixing knob, the rod can be moved upward and downward in fine increments by rotating the knurled adjustment knob.
  · After adjusting, fix using the vertical fixing clamps.
  · The range for micro movements is 10 mm.

  CAD ：

  2D

  ab∗ ：	116.79 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stab φ20

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An extendable, non-magnetic stainless steel pole with a male thread and tapped holes.

  ab∗ ：	25.61 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stativstange

  SURUGA SEIKI

  A stand used for adjusting the height of holders, etc. Rods can be securely fixed in place using two wire contacts and the point contact for the clamp screw. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  ab∗ ：	26.86 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kameraschaft 1 / 4 Zoll

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A stainless steel shaft with a diameter of ø20 mm and tripod screw (nominal size 1/4").

  CAD ：

  2D

  ab∗ ：	25.37 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Pole-Set mit variabler Höhe

  SURUGA SEIKI

  Use for changing the height of the height adjustment platform, etc. Any length within 300 mm can be specified in increments of 1 mm. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Minimum Lieferzeit ：	11 Arbeitstage

• 

  Spannzangen-Rutenständer

  SURUGA SEIKI

  Holds items via a collet type tightening method. This ensures excellent stability and more effective holding. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  ab∗ ：	96.87 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stab φ12

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An extendable, non-magnetic stainless steel pole with a male thread and tapped holes. (PL-12-300M cannot be extended.)

  ab∗ ：	14.32 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  DXY-Ständer

  MIRUC OPTICAL

  A large number of types are available for use in a variety of applications.

  ab∗ ：	122.84 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stab Einheitsgröße

  SURUGA SEIKI

  The length, diameter, and tap can be configured from the table. Please ask for special taps and special outer diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Minimum Lieferzeit ：	11 Arbeitstage

• 

  Stäbe

  SURUGA SEIKI

  A stainless steel pole. Used by standing on various types of stage, base, or similar using an M16P = 1 thread, and then connecting to cross clamps, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Minimum Lieferzeit ：	9 Arbeitstage

• 

  Shirttail Stab

  SURUGA SEIKI

  By using this rod, holders and other similar items can be set to various optical axis heights without having to purchase new rods. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Minimum Lieferzeit ：	8 Arbeitstage

• 

  Klemmenknauf

  SURUGA SEIKI

  A clamp knob for rod stands. The tip is a spring pin. The rod will not fall downward if lightly tightened. Allows for single-handed up and down adjustment.

  CAD ：

  2D

  ab∗ ：	8.24 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zwischenring

  SURUGA SEIKI

  A part used for rod stands. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  ab∗ ：	18.12 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Einstellbare Ständer

  CHUO PRECISION INDUSTRIAL

  A stand capable of micro adjustments in the upward and downward directions.

  CAD ：

  2D

  ab∗ ：	104.42 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Farbe

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Used to prevent the shaft fixed to the stand from shifting in the vertical direction.
  · When this collar is fixed to a shaft, the shaft will not shift in the axial (vertical) direction, even if the stand's clamp screw is loosened. This makes adjustment at right angles to the optical axis easy.

  CAD ：

  2D

  ab∗ ：	13.01 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ständer φ12

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Fixes the shaft of various holders such as a mirror holder.
  · Each fixing height (depth) is available for all shaft diameters (ø8 mm, ø12 mm, and ø20 mm).
  · Clamp screws are used to fix the shaft. Can be fixed in any direction from any of the three points.
  · Equipped as standard with a collar (thickness: 10 mm) which can be used for changing direction while maintaining a fixed height.
  · Clamp screws are provided in two locations (top and bottom) for products with an overall length of 80 mm or more. This helps increase the holding strength.

  CAD ：

  2D

  ab∗ ：	32.22 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ständer φ20

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Fixes the shaft of various holders such as a mirror holder.
  · Each fixing height (depth) is available for all shaft diameters (ø8 mm, ø12 mm, and ø20 mm).
  · Clamp screws are used to fix the shaft. Can be fixed in any direction from any of the three points.
  · Equipped as standard with a collar (thickness: 10 mm) which can be used for changing direction while maintaining a fixed height.
  · Clamp screws are provided in two locations (top and bottom) for products with an overall length of 80 mm or more. This helps increase the holding strength.

  CAD ：

  2D

  ab∗ ：	34.64 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ständer φ8

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Fixes the shaft of various holders such as a mirror holder.
  · Each fixing height (depth) is available for all shaft diameters (ø8 mm, ø12 mm, and ø20 mm).
  · Clamp screws are used to fix the shaft. Can be fixed in any direction from any of the three points.
  · Equipped as standard with a collar (thickness: 10 mm) which can be used for changing direction while maintaining a fixed height.
  · Clamp screws are provided in two locations (top and bottom) for products with an overall length of 80 mm or more. This helps increase the holding strength.

  CAD ：

  2D

  ab∗ ：	26.11 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...