- Hinweis auf planmäßige Wartung: Diese Seite wird auf Grund von Wartungsarbeiten in der Zeit von 3:00 21/4/2024 bis 0:00 (CET) 22/4/2024 nicht verfügbar sein. Wir entschuldigen uns vielmals für die Unannehmlichkeiten.
V-Riemenscheiben / Spannrollen
Suche durch Präzisierung der Kategorie der unteren Klasse
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Führungsrolle VGE / VGR / VGA
NBK
Idler for use for a variety of guides.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 51.37 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Standard-V-Riemenscheibe
NBK
Shaft hole, keyway and push screw machining standardized.
[Features]
· Japan's first standard inch size product.
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Imbalance mass allowance on outer circumference is 0.2% of pulley mass or 3 g, whichever is larger.
· Same accuracy as the balance prescribed in JIS B 1854-1987, "General use V-pulley".* M-type pulleys are exempt.
[Applications]
· Fans, etc.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 8.52 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Technischer Kunststoff / V-Laufrad VME
NBK
● Material/finish
· Main body: glass fiber reinforced nylon 66
· Bearing: steel, rubber seal› Jetzt konfigurierenab∗ ： 9.41 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Vankin V-Spannrolle VMP
NBK
[Features]
· Can can be used as an idler for light load wires.
· Material / Finish: SPCC, trivalent chromate treatment- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 34.14 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Technischer Kunststoff, V-Spannrolle (VIP)
IMAO CORPORATION
[Features]
· Adaptive V-belt M type, A type, B type resin pulley idler.
· Integrated ball bearing- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 15.21 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Riemenscheibe mit variabler Drehzahl
NBK
Fine rotation ratio adjustment. Simple structure, precision machining. No rattling due to micro vibrations / shock loads.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 70.40 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
Minimum Lieferzeit ： 4 Arbeitstage -
V-Spanner VMC
NBK
NBK idler has a special seal applied to bearings. No scattering of grease by centrifugal force, or suction of dust. The effective weight of the grease is great, improving durability of the idler.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 32.09 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Vankin Riemenscheibe VK
NBK
Lightweight V-belt pulley made of sheet metal.
[Features]
· Rotation molding method imparts a rigidity suitable for light/moderate load transmission in general industrial machinery.
· Pulley grooves are rounded with no sharp corners to avoid damage to the belt.
· Lightweight, so the entire machine, including base, pillow block, etc., can be made lighter and more compact.
[Applications]
· Fans, etc.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 14.18 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Isomec SP Scheibe
NBK
V pulley to international standards. Either general purpose V-belt, or narrow width V-belt can be used.
[Features]
· Consistent production from casting to machining and surface treatment.
· The cell production method allows the production of many kinds of products in low volume, with short lead times.
· Can be attached and removed from shaft / positioned with hex or socket wrench. In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission is achieved.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 39.78 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
NS-Standard V-Umlenkrolle A
KANEMITSU
Nominal diameter 2 to 24 inches, with 1 to 4 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotator.
[Features]
· A wide range of model configurations: 95 A type, 132 B types and 102 C types, with pitches ranging from 2° to 30° and 1 to 6 grooves.
· High-performance, high-quality NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
· Dimensional precision to JIS reference standards, with thorough quality control.
· Groove part shape and dimensions table.
· Maximum speed: NS standard V-pulley is recommended to be of circumferential speed under 25 m/s specification.
· Recommended minimum pulley diameter: A type 3° or greater, B type 5° or greater, and C type 8° or greater.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 10.21 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
STB-Seilscheiben 3V
KANEMITSU
Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200› Jetzt konfigurierenab∗ ： 32.54 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
Minimum Lieferzeit ： auf Anfrage -
› Jetzt konfigurieren
Minimum Lieferzeit ： auf Anfrage -
› Jetzt konfigurieren
Minimum Lieferzeit ： 4 Arbeitstage -
Isomec Poly Antriebsscheiben
NBK
V-belt pulley with high power transmission and large rotation ratio.
[Features]
· High transmission efficiency. ISO 9982 compliant.
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Makes it possible to design a high-transmission efficiency system with a small pulley diameter, short shaft distance and narrow pulley width.
・ Can be attached and removed from shaft and positioned with hex or socket wrench.
· In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission can be achieved.
· Set the imbalance tolerance on the outer circumference to 1 g or 0.1% of the total mass of the pulley and bushing, whichever is larger.
· Balancing is adjusted using a balancing machine.
[Applications]
· Automobiles, manufacturing machinery, air-conditioning equipment, electric tools, household appliances, etc.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 71.97 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Spannrollenkeil
NBK
High-speed, high power transmission V-belt pulley that conforms with JIS B 1855.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Enables high speed and high power transmission to make it possible to design a system with a smaller pulley diameter, shorter shaft distance and fewer belts.
· Full lineup. 491 size. 3V: 153 size, 5V: 257 size, 8V: 81 size.
· 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JIS B 1855-1991, "Slim V-pulley").
· Imbalance tolerance on the outer circumference guaranteed to be 0.1% of pulley mass.
[Applications]
· Fans, etc.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 15.86 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
JIS V Umlenkrolle
NBK
Highest quality pulley, with materials together with machining and balance accuracy exceeding JIS standards.
[Features]
· Consistent production from casting to machining and surface treatment.
· The cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway, and set screw machining standardized.
· Easy set-up
· A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JISB1854-1987 "General use V-pulley")
· Imbalance tolerance on the outer circumference is 0.1% of the pulley mass.
· Surface treatment, for improving corrosion resistance is a electrodeposition coating with beautiful finish.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 14.13 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Isomec-Buchsen
NBK
Safe and reliable fastening system. Responding to a design change is easy.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 20.84 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
NS-Standard V-Umlenkrolle B
KANEMITSU
Nominal diameter 2 to 30 inches, with 1 to 5 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotation.
[Features]
· Extensive range of applications, with high level of model configuration, and safety for quality to satisfy user needs.
· The NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
· Dimensional precision to JIS reference standards, with thorough quality control.› Jetzt konfigurierenab∗ ： 6.01 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
Minimum Lieferzeit ： auf Anfrage -
SNS JIS VFlaschenzug A
KANEMITSU
Nominal diameter ø67 to 710, with 1 to 3 runners available in wide selection, good balance measurements, and directly usable on high speed rotator.
[Features]
· SNS JIS V pulley is a new addition to the mechanical series, with 360 types standardized, rotation ratio, distance between shafts etc. can be freely selected.
· Ingenuity has been applied to the shape design etc. to prevent damage to the shaft or bearing.
· Shaft etc. can be preserved, useful for saving labor.
· Can also be used for machines with heavy loads and shocks etc.
· High-precision machining, for good transmission efficiency, and regular rotation ration is achieved.
· As the SNS and JIS V-pulleys, on all balancing machine products, machine using aligned balance measurements, they have good quality high-precision and are directly usable on high-speed rotators.› Jetzt konfigurierenab∗ ： 15.13 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
SNS Stromscheibe 3V
KANEMITSU
JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø67 to 630, groove no. 1 to 6. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (greater transmission capacity FC250)› Jetzt konfigurierenab∗ ： 20.53 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
Rillen-Lehre für VMG V Flaschenzug
NBK
Gauge for checking wear of pulley V-groove part. Orders can be made for individual shapes, or as a set for each groove shape. A gap has been provided between the gauge and the outer circumference of the pulley and the bottom of the V-groove. Early replacement is recommended for transmission efficiency.› Jetzt konfigurierenab∗ ： 77.67 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
Minimum Lieferzeit ： auf Anfrage -
› Jetzt konfigurieren
Minimum Lieferzeit ： auf Anfrage -
Stufenloses Getriebe (Hagino-Modell) W / L
NBK
[Features]
· Rotation has continuously variable speed.
· In the hagino type CVT, by placing a speed change pulley on the intermediate shaft and changing the position thereof, the rotational speed of the pulley on the driven side is changed utilizing the tension balance of the belt, allowing continuously variable transmission.
· Alignment is automatically adjusted.
· Both side disks and middle disks move freely on the shaft.
· Alignment with the driving side pulley and the driven side pulley is automatically adjusted.
· For this reason, the center of the belt is always held, and the belt is not strained.- 2D / 3D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 208.08 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Isomec Buchse / Adapter
NBK
ISOMEC bushing can be used simply by machining a straight hole into the rotating body.› Jetzt konfigurierenab∗ ： 47.65 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Isomec Buchse / angeschraubte Nabe
NBK
ISOMEC bushing can be used simply by connecting a bolt to the rotating body.› Jetzt konfigurierenab∗ ： 65.06 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
NS-Standard V-Umlenkrolle C
KANEMITSU
Nominal diameter 4 to 30 inches, with 2 to 6 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable on high-speed rotator.› Jetzt konfigurierenab∗ ： 349.60 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
SNS JIS VFlaschenzug B
KANEMITSU
Nominal diameter ø118 to 900, with 1 to 5 runners available in wide selection, good balance measurements, and directly usable on high-speed rotator.› Jetzt konfigurierenab∗ ： 38.05 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
SNS Stromscheibe 5V
KANEMITSU
JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø150 to 1000, groove no. 2 to 10. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (large transmission capacity FC250)
[Features]
· JIS standard sizes in addition to a wide range of intermediate sizing standardized, with free selection of rotation ratio and shaft distance etc., for easy design.
· JIS B 1855 slim V-pulley dimensions adopted for interchangeability.
· Material exceeding FC200 (large transmission capacity FC250) used, with various dimensions displaying 100% performance for high precision, vibration, and balance.
· Compared with previous products (A.B.C.....shape), narrow width V belt (3W, 5V, 8V types), there are many advantages due to the very large transmission capacity of the belt, with high horsepower greatly reducing costs.
· Due to the compactness of the pulley, it can be used for low speed horsepower not possible due to large sizes with conventional products, and it is now possible to change the chain and gear transmission.
· Power sheave has enough strength to withstand.
· Since release, it has been used by many, so can be adopted with confidence.
· Band-power ACE, and power scrum are interchangeable even when used with groove guide wheels, and max wedge belt.› Jetzt konfigurierenab∗ ： 101.89 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
STB-Seilscheiben 5V
KANEMITSU
Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200› Jetzt konfigurierenab∗ ： 458.78 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
Minimum Lieferzeit ： auf Anfrage -
› Jetzt konfigurieren
Minimum Lieferzeit ： auf Anfrage -
› Jetzt konfigurieren
Minimum Lieferzeit ： auf Anfrage -
› Jetzt konfigurieren
Minimum Lieferzeit ： auf Anfrage -
› Jetzt konfigurieren
Minimum Lieferzeit ： auf Anfrage
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | NBK | NBK | NBK | NBK | IMAO CORPORATION | NBK | OPTIBELT | NBK | NBK | NBK | KANEMITSU | KANEMITSU | CONCAR | CONCAR | INA | NBK | NBK | NBK | NBK | KANEMITSU | CONCAR | KANEMITSU | KANEMITSU | NBK | CONCAR | CONCAR | NBK | NBK | NBK | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR |
| Artikelserie | ||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||
| ab∗ | 51.37 € *Stückpreis Standardkonfiguration | 8.52 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.41 € *Stückpreis Standardkonfiguration | 34.14 € *Stückpreis Standardkonfiguration | 15.21 € *Stückpreis Standardkonfiguration Mengenrabatt | 70.40 € *Stückpreis Standardkonfiguration | - | 32.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.18 € *Stückpreis Standardkonfiguration Mengenrabatt | 39.78 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.21 € *Stückpreis Standardkonfiguration Mengenrabatt | 32.54 € *Stückpreis Standardkonfiguration | - | - | - | 71.97 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.86 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.13 € *Stückpreis Standardkonfiguration Mengenrabatt | 20.84 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.01 € *Stückpreis Standardkonfiguration | - | 15.13 € *Stückpreis Standardkonfiguration | 20.53 € *Stückpreis Standardkonfiguration | 77.67 € *Stückpreis Standardkonfiguration | - | - | 208.08 € *Stückpreis Standardkonfiguration | 47.65 € *Stückpreis Standardkonfiguration | 65.06 € *Stückpreis Standardkonfiguration | 349.60 € *Stückpreis Standardkonfiguration | 38.05 € *Stückpreis Standardkonfiguration | 101.89 € *Stückpreis Standardkonfiguration | 458.78 € *Stückpreis Standardkonfiguration | - | - | - | - | - |
| Minimum Lieferzeit | 6 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 6 Arbeitstage | Versand am selben Tag | 9 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 6 Arbeitstage | Versand am selben Tag | 7 Arbeitstage | auf Anfrage | auf Anfrage | 4 Arbeitstage | Versand am selben Tag | 8 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | Versand am selben Tag | auf Anfrage | Versand am selben Tag | 8 Arbeitstage | 9 Arbeitstage | auf Anfrage | auf Anfrage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 8 Arbeitstage | 8 Arbeitstage | auf Anfrage | auf Anfrage | auf Anfrage | auf Anfrage | auf Anfrage |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
CAD Format
-
- 2D
- 3D
Kategorien beziehen sich auf V-Riemenscheiben / Spannrollen
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.