* Detaillierte Produktinformationen nur in Englisch verfügbar
* Detaillierte Produktinformationen nur in Englisch verfügbar
* Detaillierte Produktinformationen nur in Englisch verfügbar
* Detaillierte Produktinformationen nur in Englisch verfügbar
* Detaillierte Produktinformationen nur in Englisch verfügbar
* Detaillierte Produktinformationen nur in Englisch verfügbar
* Detaillierte Produktinformationen nur in Englisch verfügbar
* Detaillierte Produktinformationen nur in Englisch verfügbar
* Detaillierte Produktinformationen nur in Englisch verfügbar
* Detaillierte Produktinformationen nur in Englisch verfügbar
Lieferzeit |
|
---|
?* Informationen zur Lieferzeit
Dodge-Bit-Einsätze, Flansch-Modell (Messing, Cadmium-frei)【3,000-5,000 Stk. pro Packung】
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.
ab∗ : | 333.33 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Dodge-Bit-Einsätze, Standard-SB (Messing, Cadmium-frei)【1,000-10,000 Stk. pro Packung】
TOKAI METAL INDUSTRY
A general purpose insert. Low cost and well balanced.
ab∗ : | 121.90 € |
---|---|
Minimum Lieferzeit : | 12 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 37.00 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Ultrasert UD2 / UD4 (Messing Cadmium-frei)【600-5,000 Stk. pro Packung】
TOKAI METAL INDUSTRY
These inserts are the best choice for easy and secure fitment into plastic holes.
ab∗ : | 117.33 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Edelstahl/Schraubeinsatz, Gewinde-Ausführung/IRU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing
RoHS-compliant
ab∗ : | 27.29 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Dodge-Einsätze, Flansch-Modell (Messing, Cadmium-frei)【600 Stk. pro Packung】
TOKAI METAL INDUSTRY
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
ab∗ : | 354.29 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
Biteinsatz aus Messing (Flansch)/HFB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
RoHS-compliant
ab∗ : | 4.03 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Rückstoßfrei (mm) SUS304【3 Stk. pro Packung】
RECOIL
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
ab∗ : | 6.24 € |
---|---|
Minimum Lieferzeit : | 24 Arbeitstage |
*Stückpreis Standardkonfiguration
Screwsert (SCT-Ausführung)【200 Stk. pro Packung】
JAPAN DRIVE-IT
[Type] Self-tapping Used
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
[L](D = screw diameter M) 2D 2.5D
[Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0
ab∗ : | 704.76 € |
---|---|
Minimum Lieferzeit : | 15 Arbeitstage |
*Stückpreis Standardkonfiguration
Messing/Schraubeinsatz, Einschraub-Ausführung IRB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-Cutting Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Nickel Plating (Ni)
RoHS-compliant
ab∗ : | 18.19 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, which ensures highly durable fastening.
ab∗ : | 1.43 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Edelstahl/Schraubeinsatz, Gewinde-Ausführung (Langloch)/IRU-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing
RoHS-compliant
ab∗ : | 38.09 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.
ab∗ : | 95.24 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Sonic Schloss aus Messing (SL-Ausführung)【5,000 Stk. pro Packung】
SUNCO
[Nominal M] 2.5, 3, 4
[Material] Brass
[Surface Processing] Bare
ab∗ : | 682.22 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
Schraubeinsatz aus Aluminium, Gewinde-Ausführung/IRL-B
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Lead-Free Free-Cutting Aluminum (KS26) Lead Content 300 ppm or Less
[Processing] Black Alumite (BAL)
RoHS-compliant
ab∗ : | 41.26 € |
---|---|
Minimum Lieferzeit : | 11 Arbeitstage |
*Stückpreis Standardkonfiguration
Biteinsatz aus Messing (Standard, einseitig)/HSB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
RoHS-compliant
ab∗ : | 4.02 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Ultrasert II aus Messing/HUD II
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
RoHS-compliant
ab∗ : | 12.20 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.5/3/4/5/6/8
Main Body
[Material] Nylon 66
[Color] Milky White
[Heat Warping Temperature] 1.82 MPa: 75°C
[UL Standard] UL94V-2 (Materials)
Screw Part
[Material] Aluminum (A2011 Equivalent)
[Processing] Degreasing
ab∗ : | 13.29 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Sel Schwimmende Befestigung【1,000 Stk. pro Packung】
SEL JAPAN
Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.
ab∗ : | 730.16 € |
---|---|
Minimum Lieferzeit : | 12 Arbeitstage |
*Stückpreis Standardkonfiguration
Dodge-Bit-Einsätze, SD (Messing, Cadmium-frei)【500-2,000 Stk. pro Packung】
TOKAI METAL INDUSTRY
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
ab∗ : | 148.57 € |
---|---|
Minimum Lieferzeit : | 12 Arbeitstage |
*Stückpreis Standardkonfiguration
C-Verschluss (CL-Modell)【100 Stk. pro Packung】
BOHSEI
The outer knurled form is reversed, which allows for high tensile strength and torque strength.
ab∗ : | 9.68 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Rückschlag Packets (mm)【5-10 Stk. pro Packung】
RECOIL
[Type] Threaded Insert Use
[Application] Light Metal
[Materials] SUS304 with Notch
[Application] Light Metal
[Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
[Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10
ab∗ : | 4.45 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
E-Sert aus Edelstahl, hergestellt von Hemlock【100 Stk. pro Packung】
SUNCO
[Nominal M] 2, 2.2, 2.5, 2.6, 7, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42
[Material] Stainless Steel
[Surface Processing] Bare
ab∗ : | 36.28 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
Ultrasert IV aus Messing/HUD IV
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5/6/8/10
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
RoHS-compliant
ab∗ : | 12.74 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 50.00 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
Techlock (SL)【5,000 Stk. pro Packung】
JAPAN DRIVE-IT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8
ab∗ : | 992.06 € |
---|---|
Minimum Lieferzeit : | 15 Arbeitstage |
*Stückpreis Standardkonfiguration
Messing/Schraubeinsatz, Einschraub-Ausführung (mit Langloch)/IRB-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Nickel Plating (Ni)
RoHS-compliant
ab∗ : | 22.01 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Einsatz aus Messing (Standard)/HSD
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
RoHS-compliant
ab∗ : | 20.37 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Einsatz aus Messing (Flansch)/HFD
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
RoHS-compliant
ab∗ : | 23.10 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Biteinsatz aus Messing (Standard, zweiseitig)/HSB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
RoHS-compliant
ab∗ : | 11.65 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Einfüllöffnung (einheitlich) (UNF)【10-100 Stk. pro Packung】
NIPPON SPREW
Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.
ab∗ : | 5.24 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Rückschlag Packets (UNC)【5-10 Stk. pro Packung】
RECOIL
*Unfortunately, only lengths of 1.5D are available.
ab∗ : | 4.64 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Recoil Paket (METRIC)【10 Stk. pro Packung】
RECOIL
[Features]
· The recoil is created by coiling a high quality stainless steel wire with rhomboid cross section into a spring-like shape.
· The insert is slightly larger than the tap hole of the other base metal, and can be attached by lightly narrowing down.
· Once equipped, its spring effect makes it almost permanently non-extractable.
ab∗ : | 20.77 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Sparrow (SP-Ausführung)【5,000 Stk. pro Packung】
JAPAN DRIVE-IT
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2
ab∗ : | 1,177.78 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
Edelstahlfeder【25-100 Stk. pro Packung】
SUNCO
[Nominal M] 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
[Material] Stainless Steel
[Surface Processing] Bare
ab∗ : | 42.11 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Drahtgewindeeinsatz zum Reparieren von Außengewinden -R【20 Stk. pro Packung】
KS SANGYO
Insert screw that can be inserted and removed easily and smoothly.
[Features]
· Ready-to-use screw insert, compatible with the tools you have at hand.
· The sampling notch makes it unnecessary to forcibly pull out to avoid damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.
ab∗ : | 11.04 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Feder (Feingewinde, Steigung)【25-100 Stk. pro Packung】
SUNCO
[Material] Stainless Steel
[Thread Size M] 8 10 12 14 16 18 20 22 24
ab∗ : | 42.11 € |
---|---|
Minimum Lieferzeit : | 15 Arbeitstage |
*Stückpreis Standardkonfiguration
E-Sert (andere, fein)【100 Stk. pro Packung】
SUNCO
[Material] Stainless Steel
[Thread Size M] 10 12 20 24 30 33 42 52
ab∗ : | 58.14 € |
---|---|
Minimum Lieferzeit : | 15 Arbeitstage |
*Stückpreis Standardkonfiguration
Feder (und andere Feingewinde, Steigung)【25-100 Stk. pro Packung】
SUNCO
[Material] Stainless Steel
[Thread Size M] 10 12 18 20 22 24
ab∗ : | 51.18 € |
---|---|
Minimum Lieferzeit : | 15 Arbeitstage |
*Stückpreis Standardkonfiguration
Lock E-Sert (feines Gewebe)【100 Stk. pro Packung】
SUNCO
[Material] Stainless Steel
[Thread Size M] 8 10 12 14 16 18 20 22 27 33 36 39
ab∗ : | 46.00 € |
---|---|
Minimum Lieferzeit : | 15 Arbeitstage |
*Stückpreis Standardkonfiguration
Messing/Schraubeinsatz, Einschraub-Ausführung (mit Verliersicherungslack)/IRB-W
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Nickel Plating (Ni)
RoHS-compliant
ab∗ : | 28.56 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Edelstahl/Schraubeinsatz aus Aluminium, Gewinde-Ausführung (Verliersicherung)/IRU-W
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing
RoHS-compliant
ab∗ : | 38.09 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Edelstahl/Schraubeinsatz aus Aluminium, Gewinde-Ausführung (Verliersicherung/Langloch)/IRU-SW
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing
RoHS-compliant
ab∗ : | 48.88 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Mini-Biteinsatz Messing/HMIB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7
[Usage Method] Press-fitting / Heated Press-fitting
[Compatible Resin] Thermoplastic
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
RoHS-compliant
ab∗ : | 4.02 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Ultrasert IV aus Messing (Flansch)/HFU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 3/4/5/6/8
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
RoHS-compliant
ab∗ : | 15.47 € |
---|---|
Minimum Lieferzeit : | 11 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
CAD |
ab∗ |
Minimum Lieferzeit |
Ausführung |
Anwendung |
Werkstoff |
Mit Schraube |
Schrauben-Ø M (nach Einsatz)(mm) |
Gewindedurchmesser (Nach dem Einsetzen), einheitlich(Zoll) |
Länge L (nach Einsatz) (D = Gewinde-Ø M). |
Kerbe |
Modell |
Verkaufseinheit |
Warenzeichen | TOKAI METAL INDUSTRY | TOKAI METAL INDUSTRY | MISUMI | TOKAI METAL INDUSTRY | HIROSUGI-KEIKI | TOKAI METAL INDUSTRY | HIROSUGI-KEIKI | RECOIL | JAPAN DRIVE-IT | HIROSUGI-KEIKI | TSUGAMI | HIROSUGI-KEIKI | TOKAI METAL INDUSTRY | SUNCO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | SEL JAPAN | TOKAI METAL INDUSTRY | BOHSEI | RECOIL | SUNCO | HIROSUGI-KEIKI | MISUMI | JAPAN DRIVE-IT | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | NIPPON SPREW | RECOIL | RECOIL | JAPAN DRIVE-IT | SUNCO | KS SANGYO | SUNCO | SUNCO | SUNCO | SUNCO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Artikelserie | Dodge-Bit-Einsätze, Flansch-Modell (Messing, Cadmium-frei)【3,000-5,000 Stk. pro Packung】 | Dodge-Bit-Einsätze, Standard-SB (Messing, Cadmium-frei)【1,000-10,000 Stk. pro Packung】 | Ultrasert UD2 / UD4 (Messing Cadmium-frei)【600-5,000 Stk. pro Packung】 | Dodge-Einsätze, Flansch-Modell (Messing, Cadmium-frei)【600 Stk. pro Packung】 | Edelstahl/Schraubeinsatz, Gewinde-Ausführung (Langloch)/IRU-S | Sonic Schloss aus Messing (SL-Ausführung)【5,000 Stk. pro Packung】 | Dodge-Bit-Einsätze, SD (Messing, Cadmium-frei)【500-2,000 Stk. pro Packung】 | E-Sert aus Edelstahl, hergestellt von Hemlock【100 Stk. pro Packung】 | Messing/Schraubeinsatz, Einschraub-Ausführung (mit Langloch)/IRB-S | Drahtgewindeeinsatz zum Reparieren von Außengewinden -R【20 Stk. pro Packung】 | Feder (und andere Feingewinde, Steigung)【25-100 Stk. pro Packung】 | Messing/Schraubeinsatz, Einschraub-Ausführung (mit Verliersicherungslack)/IRB-W | Edelstahl/Schraubeinsatz aus Aluminium, Gewinde-Ausführung (Verliersicherung)/IRU-W | Edelstahl/Schraubeinsatz aus Aluminium, Gewinde-Ausführung (Verliersicherung/Langloch)/IRU-SW | |||||||||||||||||||||||||||||||
CAD |
|
| |||||||||||||||||||||||||||||||||||||||||||
ab∗ | 333.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 121.90 € *Stückpreis Standardkonfiguration Mengenrabatt | 37.00 € *Stückpreis Standardkonfiguration | 117.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 27.29 € *Stückpreis Standardkonfiguration | 354.29 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.03 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 704.76 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.19 € *Stückpreis Standardkonfiguration | 1.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 38.09 € *Stückpreis Standardkonfiguration | 95.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 682.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 41.26 € *Stückpreis Standardkonfiguration | 4.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.20 € *Stückpreis Standardkonfiguration | 13.29 € *Stückpreis Standardkonfiguration | 730.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 148.57 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.68 € *Stückpreis Standardkonfiguration | 4.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 36.28 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.74 € *Stückpreis Standardkonfiguration | 50.00 € *Stückpreis Standardkonfiguration | 992.06 € *Stückpreis Standardkonfiguration Mengenrabatt | 22.01 € *Stückpreis Standardkonfiguration | 20.37 € *Stückpreis Standardkonfiguration | 23.10 € *Stückpreis Standardkonfiguration | 11.65 € *Stückpreis Standardkonfiguration | 5.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.64 € *Stückpreis Standardkonfiguration Mengenrabatt | 20.77 € *Stückpreis Standardkonfiguration | 1,177.78 € *Stückpreis Standardkonfiguration Mengenrabatt | 42.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.04 € *Stückpreis Standardkonfiguration | 42.11 € *Stückpreis Standardkonfiguration | 58.14 € *Stückpreis Standardkonfiguration Mengenrabatt | 51.18 € *Stückpreis Standardkonfiguration | 46.00 € *Stückpreis Standardkonfiguration Mengenrabatt | 28.56 € *Stückpreis Standardkonfiguration | 38.09 € *Stückpreis Standardkonfiguration | 48.88 € *Stückpreis Standardkonfiguration | 4.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.47 € *Stückpreis Standardkonfiguration |
Minimum Lieferzeit | 6 Arbeitstage | 12 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 9 Arbeitstage | auf Anfrage | 4 Arbeitstage | 24 Arbeitstage | 15 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 11 Arbeitstage | 4 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 12 Arbeitstage | 12 Arbeitstage | 5 Arbeitstage | 4 Arbeitstage | 7 Arbeitstage | 9 Arbeitstage | 3 Arbeitstage | 15 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | auf Anfrage | 6 Arbeitstage | 4 Arbeitstage | 15 Arbeitstage | 15 Arbeitstage | 15 Arbeitstage | 15 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 4 Arbeitstage | 11 Arbeitstage |
Ausführung | Standard | Standard | Standard | Standard | Selbstschneidendes Gewinde | Standard | Presspassung | Standard | Selbstschneidendes Gewinde | Selbstschneidendes Gewinde | Standard | Selbstschneidendes Gewinde | Standard | Presspassung | Selbstschneidendes Gewinde | Presspassung | Presspassung | Presspassung | Eingepresst | Standard | Presspassung | Standard | Standard | Presspassung | Ohne Mitnehmer | Presspassung | Selbstschneidendes Gewinde | Presspassung | Presspassung | Presspassung | Standard | Standard | Standard | Presspassung | Standard | Standard | Standard | Standard | Standard | Standard | Selbstschneidendes Gewinde | Selbstschneidendes Gewinde | Selbstschneidendes Gewinde | Presspassung | Presspassung |
Anwendung | Kunststoff, allgemein | Kunststoff, allgemein | Leichtmetall | Kunststoff, allgemein | Gusseisen | Kunststoff, allgemein | Leichtmetall | Leichtmetall | Kunststoff, allgemein | Leichtmetall | Leichtmetall / Gusseisen / Kunststoff, allgemein | Gusseisen | Kunststoff, allgemein | - | Leichtmetall | Leichtmetall | Leichtmetall | Kunststoff, allgemein | Leichtmetall | Kunststoff, allgemein | Kunststoff, allgemein | Leichtmetall | - | Leichtmetall | Leichtmetall | - | Leichtmetall | Leichtmetall | Leichtmetall | Leichtmetall | Leichtmetall | Leichtmetall | - | Kunststoff, allgemein | - | Leichtmetall / Gusseisen / Kunststoff, allgemein | - | - | - | - | Leichtmetall | Gusseisen | Gusseisen | Leichtmetall | Leichtmetall |
Werkstoff | Messing | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | Messing | Aluminium | Messing | Messing | Nylon | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | Messing | Messing | Messing | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | Messing |
Mit Schraube | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Fein-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) / Metrisches Gewinde (Fein-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Unified Thread (Fein) | Unified Thread (Regel) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Fein-) | Metrisches Gewinde (Fein-) | Metrisches Gewinde (Fein-) | Metrisches Gewinde (Fein-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) |
Schrauben-Ø M (nach Einsatz)(mm) | 2 ~ 4 | 1.7 ~ 4 | 3 ~ 8 | 2.6 ~ 10 | 2 ~ 8 | 8 | 2 ~ 5 | 27 ~ 42 | 10 | 2 ~ 8 | 16 | 2.6 ~ 8 | 1.4 ~ 8 | 3 | 2 ~ 8 | 1.4 ~ 5 | 2.6 ~ 8 | 2.5 ~ 8 | 3 ~ 4 | 3 ~ 5 | 2 ~ 6 | 2 ~ 20 | 2 ~ 42 | 2 ~ 10 | 2.5 ~ 8 | 3.5 | 2.6 ~ 8 | 2.6 ~ 5 | 2.6 ~ 5 | 1.4 ~ 5 | - | - | 2 | 3.5 | 2 ~ 24 | 3 ~ 6 | 8 ~ 24 | 10 ~ 52 | 10 ~ 24 | 8 ~ 39 | 2.6 ~ 8 | 2.6 ~ 8 | 2.6 ~ 8 | 1.4 ~ 1.7 | 3 ~ 8 |
Gewindedurchmesser (Nach dem Einsetzen), einheitlich(Zoll) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2-20 ~ #10-32 | 1/2-13 ~ #12-24 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Länge L (nach Einsatz) (D = Gewinde-Ø M). | 1D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3,5D | 2D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D | 1D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3,5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3,5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3,5D / 4D | 1.5D / 2D / 2.5D | 2.5D / 3D | - | 2D / 3D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3,5D | 1.5D / 2D / 2.5D / 3D / 3,5D | 2D / 2.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3,5D / 4D | 1D / 1.5D / 2D / 2.5D / 3D | 1.5D | 1D / 2D | 2D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3,5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3,5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3,5D | 1.5D / 2D | 1.5D / 2D / 2.5D |
Kerbe | Nicht im Lieferumfang | Nicht im Lieferumfang | Mitgeliefert | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Mitgeliefert | Nicht im Lieferumfang | Nicht im Lieferumfang | Mitgeliefert | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | - | Mitgeliefert | Mitgeliefert | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Mitgeliefert | Mitgeliefert | - | Nicht im Lieferumfang | Mitgeliefert | Mitgeliefert | Mitgeliefert | Mitgeliefert | Mitgeliefert | Mitgeliefert | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang |
Modell | Standard | Standard | - | Standard | Standard | Standard | Standard | - | Standard | Standard | - | Langloch | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | - | Standard | Standard | - | Standard | Langloch | Standard | Standard | Standard | - | - | - | Standard | Standard | Standard | - | - | - | - | Standard | Standard | Langloch | Standard | Standard |
Verkaufseinheit | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. | Packung, Pkg. |
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.