• Hinweis auf planmäßige Wartung: Diese Seite wird auf Grund von Wartungsarbeiten in der Zeit von 10:00 bis 13:30 (CET) 18/11/2018 nicht verfügbar sein. Wir entschuldigen uns vielmals für die Unannehmlichkeiten.

No Tip Processing

Daten, die angezeigt werden sollen
30
45
60
Sortierung
  1. 1
Warenzeichen
Artikelserie
ab
Minimum Lieferzeit
Material
P/W dimension tolerance (Reference tolerance)
Surface treatment
Head thickness
P (Tip)(mm)
W (Tip)(mm)
D (Shaft diameter)(mm)
Rectangular treatment
Tip shape
Character engraving type
Number of engraving characters
R-Chamfered rectangular position
C-Chamfered position
With/without gas release shape
Shape type
Trimming

    R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/Free Designation Type-

      Precision Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/Free Designation Type-

        Precision R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/R Position Selection Type-

          Precision R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/L Dimension Designation Type-

            Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/Free Designation Type-

              Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/Blank Type-

                Extra Precision Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.003/Free Designation Type-

                  Precision Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/L Dimension Designation Type-

                    Rectangular Ejector Pins For Large Mold -Die Steel SKD61+Nitrided/Free Designation Type-

                      Precision Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/Blank Type-

                        Precision Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/Free Designation・N Dimension Short Type-

                          Precision R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/Free Designation Type-

                            Precision C-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/Free Designation Type-

                              Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/L Dimension Designation Type-

                                Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/Free Designation・N Dimension Short Type-

                                  R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/L Dimension Designation Type-

                                    R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/R Position Selection Type-

                                      C-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/Free Designation Type-

                                        Rectangular Ejector Pins For Large Mold -High Speed Steel SKH51 / P・W Tolerance 0_-0.02 / Blank Type-_L Dimension Designation Type-

                                          Rectangular Ejector Pins For Large Mold -High Speed Steel SKH51/P・W Tolerance 0_-0.02/Free Designation Type-

                                            R-Chamfered Rectangular Ejector Pins For Large Mold -High Speed Steel SKH51/P・W Tolerance 0_-0.02/Free Designation Type-

                                              Rectangular Ejector Pins For Large Mold -Die Steel SKD61+Nitrided / Blank Type_L Dimension Designation Type-

                                                Rectangular Ejector Pins For Large Mold -High Speed Steel SKH51・Caulking / Blank Type_L Dimension Designation Type-

                                                  Rectangular Ejector Pins For Large Mold -High Speed Steel SKH51・Caulking/Free Designation Type-

                                                    Rectangular Ejector Blanks For Large Mold -High Speed Steel SKH51-

                                                      R-Chamfered Rectangular Ejector Pins For Large Mold -Die Steel SKD61+Nitrided/Free Designation Type-

                                                      Warenzeichen

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      MISUMI

                                                      Artikelserie

                                                      R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/Free Designation Type-

                                                      Precision Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/Free Designation Type-

                                                      Precision R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/R Position Selection Type-

                                                      Precision R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/L Dimension Designation Type-

                                                      Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/Free Designation Type-

                                                      Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/Blank Type-

                                                      Extra Precision Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.003/Free Designation Type-

                                                      Precision Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/L Dimension Designation Type-

                                                      Rectangular Ejector Pins For Large Mold -Die Steel SKD61+Nitrided/Free Designation Type-

                                                      Precision Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/Blank Type-

                                                      Precision Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/Free Designation・N Dimension Short Type-

                                                      Precision R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/Free Designation Type-

                                                      Precision C-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.005/Free Designation Type-

                                                      Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/L Dimension Designation Type-

                                                      Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/Free Designation・N Dimension Short Type-

                                                      R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/L Dimension Designation Type-

                                                      R-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/R Position Selection Type-

                                                      C-Chamfered Rectangular Ejector Pins -High Speed Steel SKH51/P・W Tolerance 0_-0.01/Free Designation Type-

                                                      Rectangular Ejector Pins For Large Mold -High Speed Steel SKH51 / P・W Tolerance 0_-0.02 / Blank Type-_L Dimension Designation Type-

                                                      Rectangular Ejector Pins For Large Mold -High Speed Steel SKH51/P・W Tolerance 0_-0.02/Free Designation Type-

                                                      R-Chamfered Rectangular Ejector Pins For Large Mold -High Speed Steel SKH51/P・W Tolerance 0_-0.02/Free Designation Type-

                                                      Rectangular Ejector Pins For Large Mold -Die Steel SKD61+Nitrided / Blank Type_L Dimension Designation Type-

                                                      Rectangular Ejector Pins For Large Mold -High Speed Steel SKH51・Caulking / Blank Type_L Dimension Designation Type-

                                                      Rectangular Ejector Pins For Large Mold -High Speed Steel SKH51・Caulking/Free Designation Type-

                                                      Rectangular Ejector Blanks For Large Mold -High Speed Steel SKH51-

                                                      R-Chamfered Rectangular Ejector Pins For Large Mold -Die Steel SKD61+Nitrided/Free Designation Type-

                                                      ab

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      Mengenrabatt

                                                      -

                                                      -

                                                      -

                                                      -

                                                      Mengenrabatt

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      -

                                                      Minimum Lieferzeit auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage
                                                      MaterialSKH51SKH51SKH51SKH51SKH51SKH51SKH51SKH51SKD61SKH51SKH51SKH51SKH51SKH51SKH51SKH51SKH51SKH51SKH51SKH51SKH51SKD61SKH51SKH51SKH51SKD61
                                                      P/W dimension tolerance (Reference tolerance)0/-0.010/-0.0050/-0.0050/-0.0050/-0.010/-0.010/-0.0030/-0.0050/-0.020/-0.0050/-0.0050/-0.0050/-0.0050/-0.010/-0.010/-0.010/-0.010/-0.010/-0.020/-0.020/-0.020/-0.020/-0.020/-0.020/-0.020/-0.02
                                                      Surface treatmentNoNoNoNoNoNoNoNoNitridedNoNoNoNoNoNoNoNoNoNoNoNoNitridedNoNoNoNitrided
                                                      Head thickness4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)8mm(JIS)8mm(JIS)8mm(JIS)8mm(JIS)6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)-6mm(JIS) / 8mm(JIS)
                                                      P (Tip)(mm)0.6 ~ 14.80.3 ~ 14.80.6 ~ 14.80.6 ~ 50.3 ~ 14.90.8 ~ 100.3 ~ 5.80.3 ~ 102 ~ 24.70.6 ~ 100.6 ~ 14.80.6 ~ 14.80.6 ~ 11.80.8 ~ 100.6 ~ 11.80.8 ~ 100.6 ~ 14.80.6 ~ 11.87 ~ 175 ~ 19.85 ~ 19.87 ~ 176 ~ 154 ~ 156 ~ 152 ~ 19.7
                                                      W (Tip)(mm)0.3 ~ 14.80.2 ~ 14.80.3 ~ 11.80.3 ~ 20.2 ~ 14.80.3 ~ 30.3 ~ 5.80.3 ~ 5.50.8 ~ 24.80.3 ~ 5.50.3 ~ 14.80.3 ~ 14.80.3 ~ 11.80.3 ~ 30.3 ~ 11.80.3 ~ 2.50.3 ~ 14.80.3 ~ 11.81 ~ 101 ~ 19.81 ~ 19.81 ~ 101 ~ 61 ~ 61 ~ 21 ~ 19.8
                                                      D (Shaft diameter)(mm)1.5 ~ 150.8 ~ 151.5 ~ 151.5 ~ 61.1 ~ 151.5 ~ 121 ~ 61 ~ 124 ~ 251.5 ~ 121.5 ~ 151.5 ~ 151.5 ~ 121.5 ~ 121.5 ~ 121.5 ~ 121.5 ~ 151.5 ~ 1210 ~ 2010 ~ 2010 ~ 2010 ~ 206 ~ 166 ~ 16-4 ~ 20
                                                      Rectangular treatmentR-Chamfered rectangularNoR-Chamfered rectangularR-Chamfered rectangularNoNoNoNoNoNoNoR-Chamfered rectangularC-ChamferedNoNoR-Chamfered rectangularR-Chamfered rectangularC-ChamferedNoNoR-Chamfered rectangularNoNoNo-R-Chamfered rectangular
                                                      Tip shapeNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNo-No
                                                      Character engraving typeNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNo-No
                                                      Number of engraving charactersNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNo-No
                                                      R-Chamfered rectangular positionWR / FRNo1AR / 2CR / 3AR / 1BR / 2BR / 2DR / 3BRWR / FRNoNoNoNoNoNoNoWR / FRNoNoNoWR / FR1AR / 2CR / 3AR / 1BR / 2BR / 2DR / 3BRNoNoNoWR / FRNoNoNo-WR / FR
                                                      C-Chamfered positionNoNoNoNoNoNoNoNoNoNoNoNo1AC / 1BC / 2AC / 2BC / 2CC / 2DC / 4ACNoNoNoNo1AC / 1BC / 2AC / 2BC / 2CC / 2DC / 4ACNoNoNoNoNoNo-No
                                                      With/without gas release shapeNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNo-No
                                                      Shape typeNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalCaulkingCaulking-Normal
                                                      TrimmingNormalAngular tip corner / NormalNormalNormalNormalNormalAngular tip corner / NormalAngular tip corner / NormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormalNormal-Normal

                                                      Loading...

                                                      1. 1

                                                      Kategorien beziehen sich auf No Tip Processing