Flachauswerferstifte, stirnseitige Gravur（R-Chamfered rectangular position：WR）
?* Informationen zur Lieferzeit und Preisen
-
Präzisions-Flachauswerferstifte / Kopfform wählbar / EN 1.3343 Equiv. / gravierte Stirn / Ecken gerundet / Dimensionen konfigurierbar
MISUMI
- 2D / 3D CAD Daten verfügbar
Jetzt konfigurierenMinimum Lieferzeit ： auf Anfrage -
Flachauswerferstifte / Kopfform wählbar / EN 1.3343 Equiv. / gravierte Stirn / Ecken gerundet / Dimensionen konfigurierbar
MISUMI
- 2D / 3D CAD Daten verfügbar
Jetzt konfigurierenMinimum Lieferzeit ： auf Anfrage
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
| Material |
| P/W dimension tolerance (Reference tolerance) |
| Surface treatment |
| Head thickness |
| P (Tip)(mm) |
| W (Tip)(mm) |
| D (Shaft diameter)(mm) |
| Rectangular treatment |
| Tip shape |
| Character engraving type |
| Number of engraving characters |
| R-Chamfered rectangular position |
| C-Chamfered position |
| With/without gas release shape |
| Shape type |
| Trimming |
|
| |
| Warenzeichen | MISUMI | MISUMI |
| Artikelserie | ||
| CAD |
|
|
| ab∗ | - | - |
| Minimum Lieferzeit | auf Anfrage | auf Anfrage |
| Material | EN 1.3343 Equiv. | EN 1.3343 Equiv. |
| P/W dimension tolerance (Reference tolerance) | 0/-0.005 | 0/-0.01 |
| Surface treatment | No | No |
| Head thickness | 4mm(T4) | 4mm(T4) |
| P (Tip)(mm) | 0.8 ～ 9.8 | 0.8 ～ 9.8 |
| W (Tip)(mm) | 0.3 ～ 9.8 | 0.3 ～ 9.8 |
| D (Shaft diameter)(mm) | 2 ～ 10 | 2 ～ 10 |
| Rectangular treatment | R-Chamfered rectangular | R-Chamfered rectangular |
| Tip shape | No | No |
| Character engraving type | Concave character / Concave character (Sequential numbering) | Concave character / Concave character (Sequential numbering) |
| Number of engraving characters | 1 characters / 2 characters / 3 characters / 4 characters / 5 characters | 1 characters / 2 characters / 3 characters / 4 characters / 5 characters |
| R-Chamfered rectangular position | WR | WR |
| C-Chamfered position | No | No |
| With/without gas release shape | No | No |
| Shape type | With engraving | With engraving |
| Trimming | Normal | Normal |
Loading...
Filtern nach:
-
Material
- EN 1.3343 Equiv.
-
P/W dimension tolerance (Reference tolerance)
- 0/-0.005
- 0/-0.01
-
Surface treatment
-
Head thickness
- 4mm(T4)
-
P (Tip)(mm)
[0.8-9.8/0.01mmTeile]
-
W (Tip)(mm)
[0.3-9.8/0.01mmTeile]
-
D (Shaft diameter)(mm)
-
Rectangular treatment
- No
- R-Chamfered rectangular
-
Tip shape
-
Character engraving type
- Concave character
- Concave character (Sequential numbering)
-
Number of engraving characters
- 1 characters
- 2 characters
- 3 characters
- 4 characters
- 5 characters
-
R-Chamfered rectangular position
-
No
-
WR
-
FR
-
No
-
C-Chamfered position
-
With/without gas release shape
-
Shape type
- With engraving
-
Trimming
- Normal
Marke
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Flachauswerferstifte, stirnseitige Gravur
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.