HOZAN Schraubendreher（Shaft type：Rund）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Ventil-Schraubendreher, D-13
HOZAN
A dedicated screwdriver convenient for attaching/detaching valve cores of American type valves (for tire tubes).
[Features]
· The handle is hexagonal which makes it easy to turn fast.
· Handle diameter 10.0 mm φ.
· Weight: 20 g.
[Applications]
· Attachment and removal of the valve core of American type valves (for tire tubes).ab∗ ： 4.27 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Auswechselbarer Keramik-Abgleichschraubendreher, D-280
HOZAN
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).ab∗ ： 58.70 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Kreuzschlitzschraubendreher, Spitzengröße Nr.00–2
HOZAN
A screwdriver enabled to \ deal with screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
[Features]
· Hole diameter is compatible with deep screws because the shaft has a thinner finish than even JIS standards.
· Shaft is thin but still complies with JIS "torsional strength" standards.
· The basic hardening treatment for shaft strength is skilled full quenching.
· The polypropylene grip with pen clip, which can be inserted into your pocket, has both strength and lightness.
· Thin and tough electroless nickel plating is used to maintain accuracy.
[Applications]
· Ideal for screws in deep places as often seen with home appliances.- Mengenrabatt
- Auf Lager
ab∗ ： 9.31 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Keramik-Abgleichschraubendreher, Satz, D-17
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· With a sewn case that is resistant to friction and pulling.
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.- Mengenrabatt
ab∗ ： 64.90 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Elektroschrauber, D-331 / D-332
HOZAN
An electric screwdriver equipped with a cushioned handle that is highly effective for slip prevention.
[Features]
· Elastomer resin is used for slip prevention of the handle component.
· Tightly fits on to the handle body and exhibits excellent gripping performance.
· Has a handle shape that makes pressing the screwdriver against screws easy so that force can be transferred well.
· The tip has been magnetically processed to hold screws and the handle is made of polypropylene resin and is lightweight.
· A design without plating in order to avoid changes in tip precision.
[Applications]
· Ideal for screw tightening work in deep and narrow spaces.
· Electric type screwdriver that can be easily pushed and turned, recommended for the Licensed Electrician Proficiency Test.- Mengenrabatt
ab∗ ： 10.86 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Präzisions-Schraubendreher, 6er-Satz
HOZAN
High-precision screwdriver set with high versatility.
[Features]
· A set of +No.0/+No.1/-1.2 x 0.32/-1.8 x 0.32/-2.3 x 0.35/-3.0 x 0.45.
· Sewn case included.
[Applications]
· Ideal for fast turning of small screws thanks to its rotary-type head that provides high workability.- Mengenrabatt
ab∗ ： 18.91 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlitzschraubendreher, D-630 – D-655
HOZAN
[Features]
· Designed to deal with the screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
· Hole diameter is compatible with deep screws like those in household appliances because the shaft has a thinner finish than even JIS standards.
· Even when thin, "torsional strength" abides by JIS standards.
· The basic hardening treatment for shaft strength is thermal hardening treatment involving skilled full quenching.
· The polypropylene grip with pen clip has both strength and lightness.
· It uses electroless nickel plating that's thin and tough in order to maintain accuracy, providing surface processing that emphasizes accuracy and strength.
[Applications]
· Convenient for tightening and loosening screws.ab∗ ： 5.10 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Kurzer Schraubendreher, D-68 / D-69
HOZAN
Screwdriver to be used for screws in narrow spaces.
[Features]
· Convenient for screws that are located in narrow places where ordinary screwdrivers cannot enter.
· Compact design that allows work in narrow locations.
· Handle shape that transfers force.
· A spherical handle allows the screwdriver to be easily pressed against the screw by grasping the handle in the palm.
[Applications]
· The short overall length of 83 mm allows easy handling in narrow spaces. Exhibits great effect in narrow spaces.ab∗ ： 5.52 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Mutterndreher, D-840
HOZAN
A convenient nut driver (box driver) handy for quick turning of nuts and bolts.
[Features]
· Shaft length is 100 mm and is also ideal for nuts in deep places where hands get in the way.
· Box depth is 18 mm for screws with a long shaft; the area where the screw protrudes from the nut can also be used.
· Black oxide processing forms an oxidation film during rustproofing treatment.
[Applications]
· Ideal for small nuts for hobby use.
· M2 screws which are ideal for the wheel nuts of electric four-wheel drive vehicles (no lock, 4 mm width across flats).- Mengenrabatt
ab∗ ： 6.77 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
LED-Elektroschrauber, D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.ab∗ ： 10.36 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Spezifikationen |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN |
| Artikelserie | ||||||||||
| ab∗ | 4.27 € *Stückpreis Standardkonfiguration | 58.70 € *Stückpreis Standardkonfiguration | 9.31 € *Stückpreis Standardkonfiguration Mengenrabatt | 64.90 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.86 € *Stückpreis Standardkonfiguration | 18.91 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.10 € *Stückpreis Standardkonfiguration | 5.52 € *Stückpreis Standardkonfiguration | 6.77 € *Stückpreis Standardkonfiguration | 10.36 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | Versand am selben Tag | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 7 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage |
| Spezifikationen |
| |||||||||
| Tip standards | - | Senkkopf (-) | Kreuzschlitz (+) | Kreuzschlitz (+)/Senkkopf (-) | Kreuzschlitz (+) | Kreuzschlitz (+)/Senkkopf (-) | Senkkopf (-) | Kreuzschlitz (+) | Packung | Senkkopf (-) |
| Tip size / Phillips (+) | - | - | Nr. 2 | Nr. 0 | Nr. 2 | Nr. 0 / Nr. 1 | - | Nr. 2 | - | - |
| Tip size / flathead (-) blade width (mm) B1 | - | 0.9 ～ 2.6 | - | 1.3 ～ 1.8 | - | 1.2 ～ 3 | 2.5 | - | - | 2.5 |
| Shaft length L (mm) | 25 | - | 100 ～ 300 | 110 | 150 | - | 100 | 35 | 125 | 17 |
| Single Product/Set Classification | Einzelstück | Produktsatz | Einzelstück | Produktsatz | Einzelstück | Produktsatz | Einzelstück | Einzelstück | Einzelstück | Einzelstück |
| Shaft type | Rund | Rund | Rund | Rund | Rund | Rund | Rund | Rund | Rund | Rund |
| Magnet | N/A | N/A | N/A | N/A | Verfügbar | N/A | N/A | N/A | N/A | N/A |
| Shaft through | - | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Bolster | - | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Grip Type | Kautschuk | Kunststoff | Kautschuk | Kunststoff | Kautschuk | Edelstahl | Kautschuk | Kautschuk | Kunststoff | Kunststoff |
| Tip size / flathead (-) blade thickness (mm) B2 | - | 0.4 | - | 0.4 | - | 0.32 ～ 0.45 | 0.35 | - | - | 0.6 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | 8 | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Tip standards
- Kreuzschlitz (+)
- Senkkopf (-)
- Kreuzschlitz (+)/Senkkopf (-)
- Torx
- Packung
- Sechskant
- Kugelkopf
- Kombination
- Sonstige
-
Tip size / Phillips (+)
- Nr. 000
- Nr. 00
- Nr. 0
- Nr. 1
- Nr. 2
- Nr. 3
- Nr. 4
- Sonstige
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
-
Single Product/Set Classification
- Einzelstück
- Produktsatz
-
Shaft type
- Rund
- Quadratisch
-
Magnet
- Verfügbar
- N/A
-
Shaft through
- Verfügbar
- N/A
-
Bolster
- im Lieferumfang enthalten
- N/A
-
Grip Type
- Kunststoff
- Holzgriff
- Kautschuk
- Edelstahl
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Suchergebnisse durch Herstellerauswahl einschränken
-
- PB SWISS TOOLS (27)
- ANEX (20)
- MAEDAKINNZOKU (16)
- KTC(KYOTO TOOL) (11)
- HOZAN (10)
- ENGINEER (9)
- WERA (7)
- TRUSCO NAKAYAMA (6)
- SK 11 (5)
- HIRAI KOGU (2)
- EIGHT TOOL (1)
- SMATO (1)
- SUNFLAG (1)
- SIGNET (1)
- AS ONE (0)
- CUSTOM KOBO (0)
- HANDIWORK (0)
- MATADOR (0)
- PROXXON MICROMOT (0)
- RITTAL (0)
- WOLFCRAFT (0)
- E VALUE (0)
- FACOM (0)
- OSG (0)
- SUEKAGE TOOL (0)
- TRAD (0)
- GEDORE (0)
- WEIDMÜLLER (0)
- HAZET (0)
- BAHCO (0)
- CIMCO (0)
- VESSEL (0)
- BERNSTEIN AG (0)
- WIHA (0)
- KNIPEX (0)
- PHOENIX CONTACT (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Schraubendreher
-
- Ratschenschlüssel / Ringschlüssel / Schraubenschlüssel
- Steckschlüssel
- Innensechskantschlüssel
- Sechsrund-Schlüssel (TX/E)
- Schraubendreher
- Bits für Schraubendreher / Schraubendrehereinsätze
- Blechbearbeitung
- Zangen / Kneifzangen / Pinzetten
- Universalschlüssel
- Werkzeuge für Wasserversorgungs-/Klimaleitungen
- Werkzeuge für Elektroanlagen
- Werkzeug-Sets/Werkzeugkästen
- Pinzetten, Klemmen, Zangen
- Fahrzeug-Wartungswerkzeuge
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.